Effect of aromatic diamine extenders on the morphology and property of RIM polyurethane–urea

An aromatic diamine, CMOMDA, was synthesized and used as a chain extender for reaction injection molding (RIM) polyurethane–urea. The morphology and properties of CMOMDA-, DETDA-, and MDA-extended poly(ether–urethane–urea)s (PEUUs) were measured by IR, DSC, DMS, SEM, and tensile testing apparatus. Well-matched values of C_h and X_ut,b/C_h were necessary for aromatic diamine-extended PEUU. DSC and SEM showed that the aggregation state of hard segments might undergo some changes with increasing hard-segment content. © 1994 John Wiley & Sons, Inc.     

MyoD and Myf-5 differentially regulate the development of limb versus trunk skeletal muscle

The myogenic progenitors of epaxial (paraspinal and intercostal) and hypaxial (limb and abdominal wall) musculature are believed to originate in dorsal-medial and ventral-lateral domains, respectively, of the developing somite. To investigate the hypothesis that Myf-5 and MyoD have different roles in the development of epaxial and hypaxial musculature, we further characterized myogenesis in Myf-5- and MyoD-deficient embryos by several approaches. We examined expression of a MyoD-lacZ transgene in Myf-5 and MyoD mutant embryos to characterize the temporal-spatial patterns of myogenesis in mutant embryos. In addition, we performed immunohistochemistry on sectioned Myf-5 and MyoD mutant embryos with antibodies reactive with desmin, nestin, myosin heavy chain, sarcomeric actin, Myf-5, MyoD and myogenin. While MyoD(-/-) embryos displayed normal development of paraspinal and intercostal muscles in the body proper, muscle development in limb buds and brachial arches was delayed by about 2.5 days. By contrast, Myf-5(-/-) embryos displayed normal muscle development in limb buds and brachial arches, and markedly delayed development of paraspinal and intercostal muscles. Although MyoD mutant embryos exhibited delayed development of limb musculature, normal migration of Pax-3-expressing cells into the limb buds and normal subsequent induction of Myf-5 in myogenic precursors was observed. These results suggest that Myf-5 expression in the limb is insufficient for the normal progression of myogenic development. Taken together, these observations strongly support the hypothesis that Myf-5 and MyoD play unique roles in the development of epaxial and hypaxial muscle, respectively.     

PPS：基于PROSITE数据库检索蛋白质功能位点的计算机程序

用标准Ｃ语言在ＩＢＭ－ＰＣ兼容微机上开发了基于ＰＲＯＳＩＴＥ数据库检索蛋白质序列功能位点的ＰＰＳ程序，ＰＲＯＳＩＴＥ是Ｂａｉｒｏｃｈ建立的蛋白质功能位点或结构模式的资料库，为蛋白质序列分析和结构功能研究提供了新工具。     

The mechanics of compressive kinking in unidirectional fiber reinforced ductile matrix composites

Three distinct stages of kink band formation and propagation exist in ductile matrix composites subjected to compressive loading. These stages are called incipient kinking, transient kinking and kink band broadening. Each stage involves a different deformation mode. The mechanics governing each stage are discussed. Incipient kinking, where the peak load is attained, and kink band broadening, where the load attains a steady-state, are important in structural design. Two design philosophies are presented. References to pertinent literature are made throughout.     

α-戊(己)基肉桂醛的合成

采用聚乙二醇 ( PEG 2 0 0 )作相转移催化剂 ,用氢氧化钾醇水溶液代替氢氧化钾醇溶液合成了 α 戊 (己 )基肉桂醛 ,收率提高到 85%以上。用此工艺合成的产品纯度高 ,香气好 ,具有较高的工业实用价值。     

钢管内径光电检测装置

介绍了一种检测细长钢管内径的光电检测装置。该装置利用线阵ＣＣＤ作传感器，采用８０３１单片机作为主控制。     

多级脉冲深穿透射孔技术

目前国内较先进的射孔工艺是增效射孔和三相流射孔,这2种射孔工艺均存在射孔深度和造缝深度浅的问题,尤其是对低渗油藏和纵向渗透率远大于横向渗透率的油藏,此造缝深度并不能满足油田生产的需要.介绍了一种新型的射孔技术,它是一种能进行深度射孔造缝的多级射孔技术,利用三级推进剂燃爆时产生峰值不连续的高温、高压气流,形成多级脉冲,多次冲击射孔孔眼前沿的裂缝,使其有效延伸至地层深处,从而较单独的射孔更能有效地增加油气产量.通过地面水泥靶的试验,证明了该射孔器的延缝功能和安全性;通过塘32等井的现场试验,证明该射孔技术对污染地层解堵有显著效果,可明显地降低地层破裂压力.     

辽河减压渣油中金属铁的赋存与分布特征

考察了辽河减渣在吸附分离、酸性溶液萃取和沥青质轻度降解过程中金属铁的分布和转移情况。结果表明，辽河减渣中有近90％的铁富集在胶质和沥青质中，部分铁以侧链较短的环烷酸盐或酚盐形式存在，部分铁连接在沥青质分子的侧链上，或是被包裹在沥青质大分子中。     

浅谈水泥基渗透结晶型防水材料标准及性能指标

针对GB18445-2001《水泥基渗透结晶型防水材料》标准在使用过程中发现的一些问题，对标准中的部分性能指标的确定及试验方法提出修改意见。     

浅谈降低电解槽氟化铝单耗的方法

氟化铝是电解生产中十分重要的原料，它对控制电解槽电解质温度，保持电解槽技术条件发挥着重要的作用。但随着电解生产成本的逐渐降低，氟化铝的消耗成为电解生产成本中的一项重要内容。本文就某分厂电解槽氟化铝添加的生产工艺、设备、控制以及管理等方面，提出降低氟化铝单耗的简要方法。