工业废渣磷石膏用作充填材料的研究

研制了以工业废渣磷石膏为基材的充填材料.改性后磷石膏的耐水性大大增强,抗压强度≥0.79 MPa、渗透系数≤1×10-5cm.s-1,并且具有合适的C、Φ值.     

双模移动终端主动探测系统的DSP设计与实现

针对移动终端用户身份识别的技术需求,设计了一种基于GSM和CDMA双模制式下基带信号处理的主动探测系统。为了满足主动探测系统的实时处理需求,采用高性能的DSP芯片TMS320C6416作为核心处理器,结合其他器件设计硬件系统,完成基带信号处理板中DSP芯片硬件接口的设计。经现场测试结果验证,系统能够实现对开机状态下GSM和CDMA移动用户身份信息的快速捕获,进而表明本设计可满足系统实时性和可靠性的要求。     

PAMAM接枝稻草对Nd3+、Sm3+、La3+的吸附特性

以环氧氯丙烷为交联剂,将聚酰胺胺树状大分子(PAMAM)接枝到稻草基体上,利用FTIR、SEM、XRD、TG等对其结构进行了表征和分析。考察了其对Nd~(3+)、Sm~(3+)、La~(3+)稀土金属离子的吸附性能,探讨了吸附时间、稀土金属离子浓度、吸附温度、溶液pH等因素对吸附性能的影响。同时对吸附过程的动力学、吸附等温线和吸附热力学进行了研究。结果表明,所制备的吸附剂对Nd~(3+)、Sm~(3+)、La~(3+)稀土金属离子的吸附平衡时间约为4 h,平衡吸附量分别为47.14、40.11和50.12 mg/g。吸附过程符合拟二级动力学模型和Freundlich等温线,表明此吸附过程是属于化学吸附过程。吸附热力学研究表明,此吸附过程是自发进行的,同时吸附过程是一个混乱度增加的熵增过程。     

Study of nucleation activity and application of a nucleating agent to copolypropylene

The influences of nucleating agent content on crystallization peak temperature, crystallization curve shape, crystallization onset temperature, and crystallinity of a copolypropylene were studied in detail by differential scanning calorimetry. The results showed that crystallization onset temperature and crystallization peak temperature increased 17°C–22°C and 15°C–19°C, respectively, with increasing nucleating agent content. The behavior of the nucleating agent showed excellent efficiency. But the shape of the crystallization curve broadened with increasing nucleating agent content, and the crystallinity came to an extremum when the nucleating agent content was 0.2%. These results generally differed from those for crystallization of i‐PP by a nucleating agent. Modification of copolypropylene was studied by use of a nucleating agent, and the characteristics of the effects of the nucleating agent on copolypropylene were mastered. The results showed that the hardness of a copolypropylene improved observably. So the abrasion resistance of biaxially oriented polypropylene (BOPP) film for cigarette packaging was improved by adopting the modified copolypropylene as the skin‐layer heat‐seal material of BOPP film. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101:3915–3919, 2006     

Theoretical studies of displacement deposition of nickel into porous silicon with ultrahigh aspect ratio

A model is developed to address the uniformity of displacement deposition of nickel inside porous silicon with an ultrahigh aspect ratio as high as 200. The nickel distribution is treated as a current distribution issue as in electrodeposition. It is shown that the deposition distribution along the pore depth exhibits a strong dependence on a polarization parameter ξ. High values of ξ correspond to mass transport limitations and lead to non-uniform distributions, whereas small ξ values, representing interfacial reaction control, produce uniform distributions. Non-uniform deposition primarily occurs at an initial stage in which the reaction is dominated by mass transfer. As the deposition process continues, the deposition rate drops to a low value, and the deposition uniformity shifts from Ni²⁺ mass transport limitations to its interfacial reaction control, leading to uniform Ni²⁺ concentration and deposition rate distributions. It is predicted that the non-uniformity at the initial stage could be remedied by increasing the bulk concentration of the nickel ions and decreasing the plating bath pH. In addition, the uniformity of the deposition distribution can be significantly improved by introducing inhibiting additive coumarin to the plating solution.     

密闭条件下使用的氟硅密封剂的制备

讨论了硫化体系，硫化剂用量，填料种类对在密闭条件下使用的氟硅密封剂耐热性能的影响，结果表明，采用硅氮烷低聚物作硫化剂，TiO2为补强填料，硅氟密封，剂在密闭环境中180℃高温下降解不明显，硫化后的密封剂仍保持一定的硬度和良好的弹性。     

地热供热系统腐蚀问题初探

地热是地球本身蕴藏的能源，储量极为丰富，我国在很多领域都大力开发和应用地热。但由于地热水本身的特点，地热系统在运行当中会出现严重的腐蚀现象，本文对地热系统腐蚀的形成及控制进行了初探。     

不同玻璃料对PTC陶瓷性能的影响

研究了AST和ASL两种玻璃料对PTC陶瓷性能的影响,发现在1280℃～1340℃的烧成范围内,添加ASL的样品其室温电阻要比添加AST的样品大,而其电阻—温度特性要比添加AST的样品好,且两种样品的晶粒尺寸及晶粒均匀度有明显差别.研究结果表明,两种样品性能上的差异与它们显微结构上的差异有着密切关系.     

自含砷合碳难处理金矿中提取金的研究─Ⅰ.氨水脱砷-石灰加压氧化-氰化

针对甘肃省坪定金矿含金、砷高、金部分地赋存于脉石、脉石为碱性、属于难选难冶矿的特点，提出了氨水脱砷－石灰加压氧化－氰化新工艺．当原矿含金8．7g／t及13．0％砷时，砷可脱除95％，金可浸出85％．技术及经济指标预计均较满意．     

丙碳脱碳溶剂的改进研究

介绍一种由丙碳、叔胺和少量活化剂构成的复合溶剂的开发，并详细地测定了不同压力和操作工况下，这种复合溶剂对ＣＯ２的吸收和解吸性能，以及溶剂的缓蚀性能和抗氧化性能．实验证明这种复合溶剂与纯丙碳相比，具有吸收容量大、速率快、脱碳净化度高、对设备无腐蚀等特点，对改进现行的丙碳脱碳工艺具有应用价值．