Analysis,simulation and verification of a bipolar current source power resonant inverter

A high‐frequency bipolar current source resonant inverter introduced in this paper has dramatic zero‐voltage‐switching (ZVS) characteristic. The analytic expressions of the resonant voltage and current are given. It indicates that the resonant waveform is composed of two parts, i.e. the oscillatory component and the stationary component. In special cases, the resonant waveform degenerates into the mono‐frequency component, as presents the graceful sinusoidal wave with very low total harmonic distortion (THD) value. Based on the closed‐form voltage and current, the component stresses on reactive elements are obtained. The impact of different component values and operating frequencies on ZVS feature is also discussed. It should be noted that the ZVS merit may be lost if the components are carelessly selected. The validity of the theoretical analysis has been proven with Pspice simulations and experimental results. Copyright © 2004 John Wiley Sons, Ltd.     

基于参考轨迹的自适应模糊Smith控制器

本文提出一种基于参考轨迹的自适应模糊Smith控制器,其模糊决策依据系统响应的参考轨迹,实现对Smith控制器参数的自整定.研究表明,该系统有较高的稳态精度和较强的鲁棒性.     

Bone Formation Process of β-TCP Ceramics with Tetracycline Tracing

To study the new bone formation in the bone defect area after implantation, the tetracycline tracing method was used. The results show that new bone formed in 1 month, and the formation rate of new bone was very high (8. 164 μm/day), considerably faster than that of control groups (3.219 μm/day). The new bone grew up quickly and β_TCP particles were surrounded by double fluorescence bands which became more obvious. The new bone formation rate was maximal at 2 months, and then gradually reduced. The rate was steady at 4 months, and then reduced to resembling as the normal physiologic metabolism of bone, which indicated the implanted materials were completely replaced by bone. Calcium phosphate materials had the ability of osteoconduction.     

高炉精料与科学配矿

原料是钢铁工业发展的基础。高炉的技术进步，必须建立在高炉精料的基础上。为此。本文提出高炉精料的内涵，研究了烧结科学配用矿的方法。     

弧形闸门局部开启动力特性分析

以某航电枢纽工程弧形工作闸门的动力问题为背景，介绍了结构自振分析的基本原理，并分别用子空间迭代法和Unsymmetric法对闸门在不同开度程度下的自振特性进行了数值模拟，同时对不同开度下流固耦合效应对自振频率的影响进行了分析，结果表明闸门面板水头越高，流固耦合效应影响越大．最后结合水力学模型的试验成果，对闸门的动力稳定性进行了分析。     

运用ActionScript编程方法实现CAI课件页面动态处理

通过运用Flash MX内嵌的ActionScript语言开发多媒体课件的体会,介绍几种较具特色的ActionScript编程方法,实现CAI多媒体课件页面动态效果的设计处理方法.     

链状纳米碳酸钙的制备

用间歇鼓泡碳化法制备了链状纳米CaCO3,用pH计和电导仪对碳化反应跟踪检测 ,对其形成机理进行了分析 ,实现了对链状CaCO3的粒度控制。考察了碳化反应过程中pH值、电导率和反应物质量分数、反应温度、CO2 气体流等因素对产品粒径和形态的影响。结果表明 ,碳化反应过程中 pH值和电导率都有一个快速下降阶段。其中电导率有两个下降回复过程。Ca(OH) 2 质量分数、CO2 流量的增大、反应温度升高都会使反应速率和晶核生长速率变大。反应温度控制在 30℃左右 ,Ca(OH) 2 质量分数为 1 0 %左右 ,在一定范围内CO2 流量越大所得晶体结构越好     

当代信息传播设计的趋势和走向

通过信息社会人类对信息感知的扩展性研究 ,从信息感知方式及思维形态的差异性来分析传统印刷文化与当代视屏文化的异同 ,以图形语言的变化来揭示当代视觉传播设计技术特征、视觉特征、多元化语言特征以及发展趋势     

燃料油硫含量分析准确度影响因素的探讨

研究了硫含量测定的影响因素，探讨了提高汽油中硫含量分析准确度的主要措施．试验结果表明：通过选取适宜的取样量，合适的灯芯疏密、粗细程度和灯芯位置高度及灯芯管内径，调节气流的大小，控制好火焰的形状和大小，可使燃料油中硫含量分析的准确度得到显著提高。     

Molecular dynamics studies of atomic-scale tribological characteristics for different sliding systems

A slider-slab sliding model for hard-to-soft and soft-to-soft sliding systems with abrasive and non-abrasive wear conditions is used to investigate atomic-scale friction. The molecular dynamics simulation uses the Morse potential to calculate interatomic forces between atoms. Separation distance between the slider and the slab is changed to simulate repulsive and attractive interactive force fields exerted on interface between two sliding components. Effects of the interaction potential parameters on the sliding friction are investigated. The relationship of frictional force, normal force and temperature rise of the slider and the slab during sliding are established. Comparison of the hard-to-soft and the soft-to-soft sliding system are carried out and shows different tribological phenomena.