Corrosion and mechanical behavior of fusion bonded epoxy (FBE) in aqueous media

In recent years there have been many reported cases of corrosion failure in cement concrete pipelines. In the majority of cases, the failures have been attributed to rebar corrosion which is caused by the permeability of chloride from low resistivity soil and subsequent attack on a passive layer on an iron bar in the structure. As a possible alternative to cementitious materials, some organic coatings based on olefin, vinyl or epoxy-based polymers have been considered. However, due to a paucity of data on the behavior of these coatings in aqueous media— particularly product water—the possibility of their application in water transmission systems in the Kingdom has not been fully exploited. This paper deals with the studies carried out on the corrosion and mechanical behavior of fusion bonded epoxy (FBE) coating on steel in aqueous media which include product water, distilled water and saline water. The mechanical testings on coating include adhesion, bending and cathodic disbondment testings. The corrosion studies include immersion testing under static and dynamic conditions, autoclave tests and accelerated (salt-fog) tests. The analysis of results indicates chemical inertness of FBE coating in either of the aforementioned water used during testing, good adhesion and no damage to the coating during bending. Cathodic disbondment tests indicate that FBE coating sustains under cathodic protection (CP) conditions. In general, the results of mechanical and corrosion tests indicate that FBE is a promising material for internal coating on steel in water transmission systems.     

Progressive events in supervisory control and compositional verification

This paper investigates some limitations of the nonblocking property when used for supervisor synthesis in discrete event systems. It is shown that there are cases where synthesis with the nonblocking property gives undesired results. To address such cases, the paper introduces progressive events as a means to specify more precisely how a synthesised supervisor should complete its tasks. The nonblocking property is modified to take progressive events into account, and appropriate methods for verification and synthesis are proposed. Experiments show that progressive events can be used in the analysis of industrial-scale systems, and can expose issues that remain undetected by standard nonblocking verification.     

Numerical and experimental investigation of three-dimensional flow in extrusion dies

The univariant element, Q₁ P₀, and the multivariant elements, QP₀ and R P₀, are compared for the numerical simulation of the flow in extrusion dies. The pressure distribution obtained by using the Q₁ P₀ element was found to be afflicted with the checkerboard pressure mode. On the other hand, the multivariant elements, Q P₀ and R P₀, gave accurate and physically reasonable velocity and pressure distributions. The computed values of the pressure drop across extrusion dies matched well with the pressure drop determined experimentally.     

Studies on chemical resistance of polyesters

Chlorendic anhydride based polyester ( I ,) tetrachlorophthalic anhydride based polyester ( II ), dibromoneopentyl glycol based polyester ( III ,) general purpose polyester ( IV ,) blend of dibromoneopentyl glycol based polyester with general purpose polyester ( V ,) chlorendic anhydride and dibromoneopentyl glycol based polyester ( VI ), and a blend of chlorendic anhydride based polyester and dibromoneopentyl glycol based polyester ( VII ) were prepared and their chemical resistance and moisture absorption studied in various reagents, acid, alkali, and water, at 25 and 65°C. It is found that the polyester ( III ) is the least affected in the presence of the acids. In 20% NaOH, there was a decrease in weight for all polyesters at both the temperatures compared to the control except the polyester ( VII ). Increase in weight of all the polyesters was observed during the absorption of moisture both at 25 and 65°C. The increase was higher at higher temperature. Polyester ( III ) thus shows the least absorption of moisture.     

Effect of AlN addition on the electrical resistivity of pressureless sintered SiC ceramics with B4C and C

The effect of 0–12 wt% AlN addition on the electrical resistivity of SiC ceramics pressureless sintered with 0.7 wt% B₄C and 2.5 wt% C additives was investigated. The elemental analysis of SiC grains revealed a codoping of Al and N in the SiC lattice with a higher N concentration with 1 wt% AlN addition and a higher Al concentration with 12 wt% AlN addition. The electrical resistivity decreased by four orders of magnitude (1.7 × 10⁵ → 8.3 × 10¹ Ω cm) with 1 wt% AlN addition due to the increased carrier density (1.7 × 10¹⁰ → 2.3 × 10¹⁵ cm⁻³) caused by excess N-derived donors. However, subsequent AlN addition (4 → 12 wt%) led to an increase (2.9 × 10³ → 1.2 × 10⁴ Ω‧cm) in electrical resistivity due to (1) increased Al dopants which act as deep acceptors for trapping N-derived carriers causing a decrease in carrier density (2.3 × 10¹⁵ → 5.9 × 10¹³ cm⁻³), (2) the formation of electrically insulating SiC-AlN solid solution, and (3) the presence of electrically insulating AlN grains at the grain boundaries.     

Oxidation and sulfidation behavior of Fe-20Cr-16Ni-4Al-1Y2O3 oxide-dispersion-strengthened alloy

High-temperature oxidation and sulfidation studies were conducted on an oxide-dispersion-strengthened alloy of composition Fe-20Cr-16Ni-4Al-1Y₂O₃. The oxidation studies were conducted in air and low-PO₂ environments over a temperature range of 650–1200°C. Results are also reported on the sulfidation resistance of preformed oxide scales and the influence of reoxidation of preformed sulfide scales. Detailed microstructural results and x-ray diffraction analysis data are presented to substantiate the corrosion behavior of the alloy over the wide range of conditions anticipated in fossil-energy systems. Data are also presented on the corrosion behavior of the alloy in oxygen/sulfur mixed gas atmospheres, and the results are used to compare the corrosion behavior of the present alloy with other chromia- and alumina-forming alloys.     

Adaptive image denoising using cuckoo algorithm

This paper presents a novel denoising approach based on smoothing linear and nonlinear filters combined with an optimization algorithm. The optimization algorithm used was cuckoo search algorithm and is employed to determine the optimal sequence of filters for each kind of noise. Noises that would be eliminated form images using the proposed approach including Gaussian, speckle, and salt and pepper noise. The denoising behaviour of nonlinear filters and wavelet shrinkage threshold methods have also been analysed and compared with the proposed approach. Results show the robustness of the proposed filter when compared with the state-of-the-art methods in terms of peak signal-to-noise ratio and image quality index. Furthermore, a comparative analysis is provided between the said optimization algorithm and the genetic algorithm.     

New Hybrid Access Method for Femtocell through Adjusting QoS

The increasing number of mobile users raises issues about coverage extension in some areas such as rural zones, indoor or underground locations： one of suggestion solution to accommodate this growing of mobile user is femtocell. Femtocell have been attracting considerable attention in mobile communications, it is a small base station that install to improve the indoor coverage of a given cellular and to enhance user＇s capacity. Call admission control and resource allocation infemtocell＇s hybrid mode are an essential performance promotion issue. Developing methods for femtocell utilization is very comparative nowadays. The two major limitations of wireless communication are capacity and range. The main contribution of our paper is developing resource allocation scheme that can manage the femocell resources between subscriber （femtocell user） and non-subscriber （macrocell user in order to maximizing the system utilizations, we provide a mechanism that leads to serve more users by admitting more subscribers basing on adjusting QoS of the connected users.     

Learning to Locate Informative Features for Visual Identification

Object identification is a specialized type of recognition in which the category (e.g. cars) is known and the goal is to recognize an object’s exact identity (e.g. Bob’s BMW). Two special challenges characterize object identification. First, inter-object variation is often small (many cars look alike) and may be dwarfed by illumination or pose changes. Second, there may be many different instances of the category but few or just one positive “training” examples per object instance. Because variation among object instances may be small, a solution must locate possibly subtle object-specific salient features, like a door handle, while avoiding distracting ones such as specular highlights. With just one training example per object instance, however, standard modeling and feature selection techniques cannot be used. We describe an on-line algorithm that takes one image from a known category and builds an efficient “same” versus “different” classification cascade by predicting the most discriminative features for that object instance. Our method not only estimates the saliency and scoring function for each candidate feature, but also models the dependency between features, building an ordered sequence of discriminative features specific to the given image. Learned stopping thresholds make the identifier very efficient. To make this possible, category-specific characteristics are learned automatically in an off-line training procedure from labeled image pairs of the category. Our method, using the same algorithm for both cars and faces, outperforms a wide variety of other methods.     

A robust test of uncertain linear systems

In this paper, it is shown that for low-order uncertain systems, there is no need to calculate all the minimum and maximum values of the coefficients for a perturbed system which is expressed in terms of polynomials and hence no need to formulate and test all the four Kharitonov＇s polynomials. Furthermore, for higher-order systems such as n ≥ 5, the usual four Kharitonov＇s polynomials need not be tested initially for sufficient condition of perturbed systems; rather, the necessary condition can be checked before going for sufficient condition. In order to show the effectiveness of the proposed method, numerical examples are shown and computational efficiency is highlighted.