Mechanical behavior of electrophoretically modified CFRP composites at elevated temperatures: An assessment of the influence of graphene carboxyl bath concentration

The study aims at investigating the mechanical behavior of carbon fiber reinforced polymer (CFRP) composites modified with graphene carboxyl at elevated temperature (ET-110°C) and understanding the effect of electrophoretic deposition bath concentration (0.5 g/L, 1.0 g/L, and 1.5 g/L) on their mechanical behavior at ET. The 1.5 g/L composite has revealed a maximum improvement in energy absorbed before failure of 33.25% at RT and 22.54% at ET for flexural testing and ∼35% at RT for short beam shear testing, over neat CFRP composite. The modified composites have shown an improved flexural strain to failure at both RT and ET, with 1.5 g/L composite exhibiting maximum enhancement of 12.41% at RT and 26.52% at ET over neat composite. However, at ET, modified composites exhibited lower flexural strength and interlaminar shear strength values in comparison to that of neat. Viscoelastic behavior of all composites was studied to understand bath concentration's effect on thermal behavior via dynamic mechanical thermal analysis. Differential scanning calorimetry was employed for governing the glass transition temperature of composites. Fractography of tested samples (both ET and RT) was performed utilizing a scanning electron microscope to determine the prominent failure mode.     

Improved Routh-Pade/spl acute/ approximants: a computer-aided approach

A geometric programming based computer-aided method to derive a reduced order (rth-order) approximant for a given (stable) SISO linear continuous-time system is presented. In this method, stability and the first r time moments/Markov parameters are preserved as well as the errors between a set of subsequent time moments/Markov parameters of the system and those of the model are minimized.     

Modified phacoemulsification in situ

We describe a phacoemulsification technique for cataracts in eyes with anticipated weak zonular apparatus. After central sculpting, a crater 90% deep is made. A horizontal fracture is created with the phaco probe and chopper. The nucleus is chopped, dividing the inferior hemisection into 2 pie-shaped pieces, which are then emulsified. Without rotating the nucleus, a groove is made at the superior hemisection and a vertical fracture created with the chopper. The bevel of the phaco probe is then turned down to emulsify each quadrant separately. This technique is especially useful in eyes with weakened zonular apparatus such as those with hypermature cataract, uveitis, long-standing glaucoma, trauma, retinitis pigmentosa, and operated retinal detachments.     

Structural and electrical measurements of CdZnSe composite

TheI—Vcharacterization and the electrical resistivity of selenium rich Se₈₅Cd_15-xZn_x (x = 0, 3, 7, 11 and 15) system at room temperature have been studied. Samples were obtained using melt cooling technique. So prepared samples were then characterized in terms of their crystal structure and lattice parameter using X-ray diffraction method. The materials were found to be poly crystalline in nature, having zinc blend structure over the whole range of zinc concentration. The measurements ofI—V bdcharacteristics have been carried out at different temperatures from room to 140°C. The electrical resistivity of the samples with composition at room temperature has been found to vary between maximum 2.7 x 10⁸ Ωm and minimum 7.3 x 10⁵ Ωm and shows a maximum at 3 at. wt.% of Zn. The carrier activation energy of the samples with composition has also been determined and found to vary from 0.026 eV to 0.111 eV.     

Process Optimization of an Aerobic Upflow Sludge Blanket Reactor System

Response of an aerobic upflow sludge blanket (AUSB) reactor system to the changes in operating conditions was investigated by varying two principle operating variables: the oxygenation pressure and the flow recirculation rate. The oxygenation pressure was varied between 0 and 25?psig (relative), while flow recirculation rates were between 1,300 and 600% correspondingly. The AUSB reactor system was able to handle a volumetric loading of as high as 3.8?kg total organic carbon (TOC)/m3?day, with a removal efficiency of 92%. The rate of TOC removal by AUSB was highest at a pressure of 20?psig and it decreased when the pressure was increased to 25?psig and the flow recirculation rate was reduced to 600%. The TOC removal rate also decreased when the operating pressure was reduced to 0 and 15?psig, with corresponding increase in flow recirculation rates to 1,300 and 1,000%, respectively. Maintenance of a high dissolved oxygen level and a high flow recirculation rate was found to improve the substrate removal capacity of the AUSB system. The AUSB system was extremely effective in retaining the produced biomass despite a high upflow velocity and the overall sludge yield was only 0.24–0.32?g VSS/g TOC removed. However, the effluent TOC was relatively high due to the system’s operation at a high organic loading.     

Rice bran oil and hypocholesterolemia in rats

Rats fed rice bran oil at 10% level for a period of eight weeks showed significantly lower levels of total cholesterol, low density lipoprotein and very low density lipoprotein cholesterol, both on cholesterol-containing and cholesterol-free diets. High density lipoprotein cholesterol was increased but triglyceride showed a decrease that was not statistically significant. Liver cholesterol and liver triglycerides were also reduced. Fecal excretion of neutral sterols and bile acids was increased after ingestion of rice bran oil.     

Lipoprotein(a) and inflammation in human coronary atheroma: association with the severity of clinical presentation

OBJECTIVES: The purpose of this study was the investigation of the in vivo role of lipoprotein(a) [Lp(a)] and inflammatory infiltrates in the human coronary atherosclerotic plaque and their correlation with the clinical syndrome of presentation. BACKGROUND: Lipoprotein(a) is an atherogenic and thrombogenic lipoprotein, and has been implicated in the pathogenesis of acute coronary syndromes. Lipoprotein(a) induces monocyte chemoattraction and smooth muscle cell activation in vitro. Macrophage infiltration is considered one of the mechanisms of plaque rupture. METHODS: This study of atherectomy specimens investigated the in vivo role of Lp(a) at different stages of the atherogenic process, and its relationship with macrophage infiltration. We examined coronary atheroma removed from 72 patients with stable or unstable angina. Specimens were stained with antibodies specific for Lp(a), macrophages (KP-1), and smooth muscle cells (alpha-actin). Morphometric analysis was used to quantify the plaque areas occupied by each of the three antigens, and their colocalization. RESULTS: All specimens had localized Lp(a) staining; the mean fractional area was 58.2%. Ninety percent of the macrophage areas colocalized with Lp(a) positive areas, whereas 31.3% of the smooth muscle cell areas colocalized with Lp(a) positive areas. Patients with unstable angina (n = 46) had specimens with larger mean plaque Lp(a) areas than specimens from stable angina patients (n = 26): 64.4% versus 47.7% (p = 0.004). Unstable angina patients with rest pain (n = 28) had greater mean plaque Lp(a) area than unstable angina patients with crescendo exertional pain (n = 18): 71.1% versus 52.4% (p < 0.001). Mean KP-1 area was 31.2% in unstable rest angina versus 18.3% in stable angina (p = 0.05); alpha-actin area was greater in stable (48.5%) and crescendo exertional angina (48.8%) than in rest angina (30.4%). The strongest correlation between plaque KP-1 and Lp(a) area was in unstable rest angina (r = 0.88, p < 0.001), and between alpha-actin and Lp(a) areas in the crescendo exertional angina (r = 0.62, p < 0.01). CONCLUSIONS: Lipoprotein(a) is ubiquitous in human coronary atheroma. It is detected in larger amounts in tissue from culprit lesions in patients with unstable compared to stable syndromes, and has significant colocalization with plaque macrophages. A correlation of plaque alpha-actin and Lp(a) area suggests a role of Lp(a) in plaque growth.