Use of polyethylene films photografted with 2‐(dimethylamino)ethyl methacrylate as a potential adsorbent for removal of chromium (VI) from aqueous medium

A new polymeric adsorbent material based on polyethylene (PE) was prepared by photografting of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) as a positively chargeable monomer to a PE film. The effects of the experimental parameters, such as the pH value, temperature, and grafted amount on adsorption of chromium(VI) (Cr(VI)) ions were investigated for the DMAEMA‐grafted PE (PE‐g‐PDAMEMA) films. The maximum adsorption capacity was obtained at the initial pH value of 3.0 for a PE‐g‐PDMAEMA film with 1.8 mmol/g and the maximum adsorption capacity obtained was higher than or compatible to those of many of the other polymeric adsorbents prepared for Cr(VI) ions. The adsorption kinetics obeyed the mechanism of the pseudo‐second order kinetic model and adsorption of Cr(VI) ions on PE‐g‐PDMAEMA films was well expressed by the Langmuir isotherm model. A high Langmuir adsorption constant suggests that the adsorption of Cr(VI) ions occurs between protonated dimethylamino groups and ions mainly through the electrostatic interaction. Cr(VI) ions adsorbed were successfully desorbed from a PE‐g‐PDMAEMA film in solutions of NaCl, NH₄Cl, NH₄Cl containing NaOH, and NaOH and a PE‐g‐PDMAEMA film was regenerated and repeatedly used for adsorption of Cr(VI) ions without appreciable loss in the adsorption capacity. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43360.     

Higher order structures and mechanical properties of bacterial homo poly(3-hydroxybutyrate) fibers prepared by cold-drawing and annealing processes

Pure bacterial homo poly(3-hydroxybutyrate) (PHB) fibers were prepared by melt spinning, followed by cold-drawing in an amorphous state at a temperature just above its glass transition temperature. Cold drawn fibers obtained were further drawn at higher temperatures, followed by annealing at various temperatures under tension. Relations among the processing conditions, higher order structures and mechanical properties were investigated using wide- and small-angle X-ray diffractions (WAXD and SAXD, respectively), birefringence, differential scanning calorimetry (DSC), and tensile measurements. PHB has two different crystalline forms, 2₁ helix conformation (α-form) and planar zigzag conformation (β-form). A single broad reflection of β-form was detected even in a PHB fiber drawn once at a temperature just above its T_g immediately after quenching and it tended to be stronger after 2nd drawing at higher temperatures. Annealing under low temperature and high tension facilitates the occurrence of β-form. It is suggested that the β-form crystal is formed not only from the tie chains between α-form lamella, but also from completely free amorphous chains. Changes in the amount of two types of crystals were analyzed using the WAXD integrated intensity. Birefringence of these fibers shows negative and positive values, depending on process conditions. Changes in higher order structure on the mechanical properties are also discussed.     

Generation of New Artificial Metalloproteins by Cofactor Modification of Native Hemoproteins

Heme can be removed from a number of native hemoproteins, thus forming corresponding apoproteins, each of which provides a site for binding of a metal complex. In one example, myoglobin, an O₂ storage protein, can be reconstituted with iron porphycene to dramatically enhance the O₂ affinity. Although it is known that myoglobin has poor enzymatic activity, the insertion of iron corrole or iron porphycene into apomyoglobin increases its H₂O₂-dependent peroxidase/peroxygenase activities. Furthermore, reconstitution with manganese porphycene promotes hydroxylation of an inert C H bond. It is also of interest to insert a non-porphyrinoid complex into an apoprotein. A cavity of apocytochrome c has been found to bind a diiron carbonyl complex, serving as a functional model of diiron hydrogenase. Aponitrobindin has a rigid β-barrel structure that provides an excellent cavity for covalently anchoring a metal complex. A rhodium complex embedded in the cavity of genetically modified nitrobindin has been found to promote stereoselective polymerization of phenylacetylene.     

Improvement in D-E Hysteresis Curve Squareness of PZT Thin Films—Effect of Oxygen Partial Pressure in High-Pressure Post-Annealing

A high-pressure annealing was applied to a post-annealing process for sol-gel derived PZT thin films. The squareness of D-E hysteresis curves changes depending on both total pressure and oxygen concentration. Moreover, the change follows the product of the total pressure and the oxygen concentration, which correspond to oxygen partial pressure P_O2. Where the P_O2 is higher than 0.03 MPa, few of the squareness of the hysteresis curve are excellent. The squareness of the hysteresis curves dramatically improve as the P_O2 decreases. Where the P_O2 is lower than 0.01 MPa, the squareness deteriorates slightly. These changes in the D-E hysteresis curves are thought to be explained by the generation of lead and oxygen vacancies as a function of the P_O2.     

Hybridized synergy effect among TiO2, Pt and graphite silica on photocatalytic hydrogen production from water–methanol solution

The photocatalytic production of hydrogen gas from aqueous methanol solution was performed using powdered mixtures of graphite silica (GS) and platinized TiO₂ (Pt/TiO₂) or those of GS, Pt and TiO₂. The addition of GS to Pt/TiO₂ resulted in the decrease of the amount of H₂ gas, whereas the addition of GS to mixtures of TiO₂ and Pt led to the incremental production of H₂ gas. This effect is attributed to the aggregation of GS, TiO₂ and Pt in suspension. The new additional electron transfer process of TiO₂ → Pt → GS caused the increment of the amount of hydrogen gas.     

Health-monitoring technologies for alumina-fiber-reinforced plastics

Transmitted light could detect matrix cracks that occurred in the early stages of fracture of alumina-fiber-reinforced plastics (alumina-FRPs); these cracks could not be detected by acoustic emission (AE). An optical-fiber Bragg grating (FBG) sensor could detect the matrix cracks but it must be embedded in the FRPs. To determine which wavelength is sensitive to the defects in the FRP, the spectra of the transmitted and reflected light were measured. The intensity of the transmitted light, especially in the visible region (wavelength: 400–800 nm), decreased as the bending stiffness of the test piece decreased. It is thus concluded that to monitor the decrease in bending stiffness of FRPs, a simple sensor using a visible ray is good enough. And this transmitted-light NDE technique can work in the strong electromagentic field associated with a superconductor. It will therefore be useful for detecting defects in the FRP of the load-support system in service.     

Fabrication of 0.95Sn−0.05Au solder micro-bumps for flip-chip bonding

This letter describes the successful fabrication of a 0.95Sn−0.05Au solder microbump on a compound semiconductor wafer by reflowing of multi-layer metal film. Since the inherent interdiffusion in Au−Sn phases results in the alloying of multi-layer films, the composition of micro-bump is well controlled by the thickness of constituent metal films. The micro-bumps melt at about 220 C, which is close to the lowest eutectic temperature in a Au−Sn system. Solder bonding using 0.95Sn−0.05Au micro-bump is a very useful technique for the flipchip bonding of compound semiconductor devices.     

Synthesis,properties, and solid-state assemblies of β-alkyl-substituted dipyrrolyldiketone BF2 complexes

In this paper, the synthesis and solid-state structures of β-alkyl-substituted dipyrrolyldiketone BF₂ complexes are discussed; these complexes can function as π-conjugated acyclic anion receptors (“molecular flippers”) and are potential building subunits of anion-responsive π-conjugated oligomers or polymers. Modes of the solid-state assemblies in these complexes determined by performing single-crystal X-ray analysis are found to depend on the lengths of the alkyl chains at the β-positions. A β-methyl-substituted receptor has a highly planar structure, which efficiently forms stacking assemblies in the core π-plane in the solid state, while a β-ethyl-substituted receptor shows no stacking assemblies due to the presence of bulky ethyl moieties, which form only dimeric structures by hydrogen bonding. β-Alkyl-substituted anion receptors can be used not only as monomer units of stimuli-responsive polymeric macromolecules but also as components of solid-state electronic materials.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.