Hybridized synergy effect among TiO2, Pt and graphite silica on photocatalytic hydrogen production from water–methanol solution

The photocatalytic production of hydrogen gas from aqueous methanol solution was performed using powdered mixtures of graphite silica (GS) and platinized TiO₂ (Pt/TiO₂) or those of GS, Pt and TiO₂. The addition of GS to Pt/TiO₂ resulted in the decrease of the amount of H₂ gas, whereas the addition of GS to mixtures of TiO₂ and Pt led to the incremental production of H₂ gas. This effect is attributed to the aggregation of GS, TiO₂ and Pt in suspension. The new additional electron transfer process of TiO₂ → Pt → GS caused the increment of the amount of hydrogen gas.     

Synthesis,properties, and solid-state assemblies of β-alkyl-substituted dipyrrolyldiketone BF2 complexes

In this paper, the synthesis and solid-state structures of β-alkyl-substituted dipyrrolyldiketone BF₂ complexes are discussed; these complexes can function as π-conjugated acyclic anion receptors (“molecular flippers”) and are potential building subunits of anion-responsive π-conjugated oligomers or polymers. Modes of the solid-state assemblies in these complexes determined by performing single-crystal X-ray analysis are found to depend on the lengths of the alkyl chains at the β-positions. A β-methyl-substituted receptor has a highly planar structure, which efficiently forms stacking assemblies in the core π-plane in the solid state, while a β-ethyl-substituted receptor shows no stacking assemblies due to the presence of bulky ethyl moieties, which form only dimeric structures by hydrogen bonding. β-Alkyl-substituted anion receptors can be used not only as monomer units of stimuli-responsive polymeric macromolecules but also as components of solid-state electronic materials.     

Study on the determination of pesticide residues in crops by ion-trap GC/MS/MS

Ion-trap GC/MS/MS was evaluated for the multi-residue determination of pesticides in agricultural products. Matrices were extracted from samples (spinach, carrot, onion and brown rice) with acetone and submitted to gel permeation chromatography, followed by a clean-up step through a graphite carbon cartridge. Thirty-five pesticides were added to either matrix, and analyzed by GC/MS/MS. Detection limits of pesticides by GC/MS/MS was almost the same as those by GC/MS (SIM). Coefficients of variation of peak area in 5 measurements of each pesticide at 0.1 microgram/mL or 0.05 microgram/mL with or without matrices were mostly acceptable, though those of 20 pesticides out of 35 were higher than 10% at a concentration of 0.02 microgram/mL. It was indicated that matrix artifacts, which interfere with GC/MS-Scan analysis, could be eliminated in some cases by using GC/MS/MS.     

Free-form curves cutting using flexible circular saw

A flexible circular saw, which can be used in a novel machining process for high-speed carbon fiber-reinforced plastic (CFRP) plate cutting, was developed. In this process, the saw is deflected like a bowl-like shape. A cross-section of the saw body then forms a circular arc. A curved line can therefore be cut without interference by the bowl-like deflection. In addition, the radius of the cross-section of the saw body can be controlled by adjusting the deflection. This process therefore allows curves to be cut with a varied radius using a single saw. This process can carry out high-speed curved-line cutting with a feed rate of 3 m/min on a CFRP plate. However, it is difficult to cut free-form curves using a flexible circular saw. Therefore, in this research, a new technique that can cut free-form curves using a flexible circular saw was proposed. Then, a cutting test applying the technique was carried out.     

Development of gap sensing system for narrow gap laser welding

Narrow gap welding with an oscillation laser beam is one of the effective processes for thick plate welding. To put this welding process into practical manufacturing, a groove-sensing system using image processing for narrow gap welding with an oscillation laser beam is used. This developed system uses still images of the weld zone taken by a coaxial CMOS camera. It can recognize the position of the groove wall by analysing the brightness distribution in the still image. It can then control the oscillation width and the laser-irradiated area by calculating the groove width and the groove centre position. Some narrow gap welding experiments were performed to evaluate the performance of the developed system. The results revealed that the developed system is effective for narrow gap welding with an oscillation laser beam. Using this system, the narrow gap groove can be welded even if the groove width has changed during the welding process.     

Doped Helium Crystals Growth and Study

No Heading The new technique for embedding microimpurities into solid helium has been developed. A He crystal was grown in a vertical cylindrical cell placed in the bath of pumped LHe cryostat. The He solid was continuously moved downward by exhaust of helium from the cell bottom and was simultaneously restored from its upper edge by sedimentation of a jet of gas helium mixed with impurity. A guest particle density of 3· 10¹⁹ per cc and stable during an hour doped crystal growth with the rate of 1 mm per 20 s were achieved. The solid Deuterium clusters isolated in solid Helium have been investigated at T = 1.3K and P = 3 MPa by CARS technique. The strong effect of Raman scattering sensitivity to the molecular environment nuclear spin has been found in CARS - the ratio of probabilities for the scattering by para (J=1) and ortho (J=0) deuterium being equal to 1 in a gas is as high as 10,000 in nearly pure o-D₂, whereas it is 50 in common Raman scattering. This effect has been shown to give rise starting from cluster size corresponding to the phonon band onset.PACS numbers: 33.20 Fb; 33.70 Jg: 67.80 Mg     

Intestinal absorption and biological effects of orally administered amorphous silica particles

Although amorphous silica nanoparticles are widely used in the production of food products (e.g., as anticaking agents), there is little information available about their absorption and biological effects after oral exposure. Here, we examined the in vitro intestinal absorption and in vivo biological effects in mice of orally administered amorphous silica particles with diameters of 70, 300, and 1,000 nm (nSP70, mSP300, and mSP1000, respectively) and of nSP70 that had been surface-modified with carboxyl or amine groups (nSP70-C and nSP70-N, respectively). Analysis of intestinal absorption by means of the everted gut sac method combined with an inductively coupled plasma optical emission spectrometer showed that the intestinal absorption of nSP70-C was significantly greater than that of nSP70. The absorption of nSP70-N tended to be greater than that of nSP70; however, the results were not statistically significant. Our results indicate that silica nanoparticles can be absorbed through the intestine and that particle diameter and surface properties are major determinants of the degree of absorption. We also examined the biological effects of the silica particles after 28-day oral exposure in mice. Hematological, histopathological, and biochemical analyses showed no significant differences between control mice and mice treated with the silica particles, suggesting that the silica nanoparticles evaluated in this study are safe for use in food production.     

Generation of New Artificial Metalloproteins by Cofactor Modification of Native Hemoproteins

Heme can be removed from a number of native hemoproteins, thus forming corresponding apoproteins, each of which provides a site for binding of a metal complex. In one example, myoglobin, an O₂ storage protein, can be reconstituted with iron porphycene to dramatically enhance the O₂ affinity. Although it is known that myoglobin has poor enzymatic activity, the insertion of iron corrole or iron porphycene into apomyoglobin increases its H₂O₂-dependent peroxidase/peroxygenase activities. Furthermore, reconstitution with manganese porphycene promotes hydroxylation of an inert C H bond. It is also of interest to insert a non-porphyrinoid complex into an apoprotein. A cavity of apocytochrome c has been found to bind a diiron carbonyl complex, serving as a functional model of diiron hydrogenase. Aponitrobindin has a rigid β-barrel structure that provides an excellent cavity for covalently anchoring a metal complex. A rhodium complex embedded in the cavity of genetically modified nitrobindin has been found to promote stereoselective polymerization of phenylacetylene.     

Mobile robot navigation by a Distributed Vision System

This paper proposes aDistributed Vision System (DVS), which is an intelligent infrastructure for mobile robots consisting of manyvision agents (VAs) embedded in an environment. The system monitors the environment from various viewing points with the VAs, maintains the dynamic environment models, and provides various information to robots. Based on this concept, we have developed a prototype of the DVS which consists of sixteen vision agents and simultaneously navigates two robots in a model town.