Method for correcting molecular weight from gel-permeation chromatography. I. Skewing and concentration corrections

The purpose of this paper is to present a metod to calculate real molecular weight averages of polymer samples from GPC chromatograms where the instrumental spreading functions are skewed and the concentration effect exists. In this method, it is assumed that (1) the skewed chromatograms of monodisperse polymer samples can be represented as resultant of halves of two different Gaussians, (2) the resolution factors are regarded as constant in the case of low sample loading, and (3) the peak elution volume is independent of the presence of other components in the case of low sample loading. Adequate monodisperse polystyrenes and the mixtures (binary, seven and ten components) were examined for this purpose; and the molecular weight averages calculated by this method were compared with the ones obtained by Rosen and Provder's method. From the results in our study, it is found that this method can be available for correcting molecular weight from GPC chromatograms except for very narrow high molecular weight samples.     

Effect of platelet-activating factor on lipoprotein lipase and blood lipids

We investigated the effect of platelet-activating factor (PAF) and of the PAF specific antagonist CV-6209 on plasma lipid metabolism, and particularly on post-heparin plasma lipolytic activity in male Wistar rats. Lipoprotein lipase (LPL) activity was enhanced by intravenous injection of PAF before intravenous injection of heparin when the PAF dose was low (0.2 μg/kg). PAF activated hepatic triacylglycerol lipase (HTGL) activity dose-dependently. Plasma triacylglycerols (TG) significantly decreased with the activation of LPL and/or HTGL. Plasma total cholesterol (TC) and phospholipid (PL) levels decreased at a low dose of PAF (0.2 μg/kg), but increased when higher doses were used. The PAF antagonist CV-6209 partially reversed the PAF induced effects on HTGL, TC and PL. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

OXIDATION OF SULFUR DIOXIDE IN DIFFERENT TYPES OF THREE PHASE REACTORS

Five different types of three-phase reactors are compared with each other by using oxidation of sulfur dioxide on activated carbon. The kinetic measurements were carried out by changing concentrations of sulfur dioxide from 0.04 to 0.17% (volume) and those of oxygen from 2 to 21%. The reaction rate was 0.2 order with respect to sulfur dioxide and 0.5 order with respect to oxygen. The catalytic effectiveness factor and intraparticle diffusivity were evaluated by changing particle sizes of activated carbon from 0.03 to 1.6 mm. Resistances of gas-liquid, liquid-solid mass transfer and intraparticle diffusion were estimated for individual reactors. The optimum reactor was dependent on operating conditions such as gas flow rates, rotating speeds and particle sizes.     

Ethylene carbonate-based organic electrolytes for electric double layer capacitors

A new electrolytic solution based on a mixed solvent of ethylene carbonate (EC) with sulfolane (SL) or -butyrolactone (-BL) has been examined as an electric double layer capacitor. Fundamental properties, such as electrolytic conductivity, viscosity, and thermal stability, were measured for solutions containing quaternary alkylammonium salts as the supporting electrolyte. Maximum conductivities were obtained for the solutions with mixed solvent of 20–40 mol % EC in the EC+-BL system: 1.2–1.3×10^–2S cm^–1 for EC+-BL dissolving 0.5 M Et₄ NBF₄ (Et=C₂H₅). The electrochemical and the thermal stabilities of the solution were dependent on the electrolytic salt as well as the solvent composition. A stable discharge capacitance and a high coulombic efficiency were obtained in a model capacitor using carbon fibre electrodes and the organic electrolyte of EC+-BL/Et₄NBF₄ (or EC+-BL/Et₄NPF₆).     

Application of the Solvothermal Process in the Synthesis of High-performance Ag/γ-Al_2O_3 Catalysts

1 INTRODUCTION Since Cu-ZSM-5 was reported as an effective catalyst for the selective catalytic reduction (SCR) of NO by hydrocarbons in the presence of excess oxygen, the SCR of NOx has received much attention as a kind of potential technology for cleaning NOx in various oxygen-rich exhausts of diesel engine, lean burning gasoline engine and gas engine. Although a number of catalysts have been tested, to date, it still seems to be difficult to find a catalyst that is completely suit…     

Morphology study of oriented SmBCO film deposited by MOCVD

c-axis-oriented SmBa_2Cu_3O_7(SmBCO) films have been deposited on(100)- LaA1O_3(LAO)substrate by metal organic chemical vapor deposition(MOCVD) technique.The effects of deposition temperature(T_(dep)) and total pressure(P_(tot)) on the orientation and microstructure of SmBCO films were investigated.The orientation of SmBCO films transformed from α-axis to c-axis with increasing of T_(dep) from 900 to 1 100℃.At T_(dep)=1 050℃,SmBCO films had c-axis orientation and tetragon surface.At P_(tot)~(dep)=400-800 Pa and T_(dep)=1 050 ℃,totally c-axis-oriented SmBCO films were obtained.The R_(dep) of SmBCO films increased firstly and then decreased with increasing P_(tot).The surface of SmBCO films exhibited tetragon morphology at 1 050 ℃ and400 Pa.Maximum thickness of SmBCO film deposited was 1.2μm at P_(tot)= 600 Pa,and the corresponding R_(dep)was 7.2 μm·h~(-1).     

Relation between crystal structure and lattice oxygen content of sintered reaction-bonded silicon nitride

When reaction-bonded silicon nitride containing MgO/Y₂O₃ additives is sintered at three different temperatures to form sintered reaction-bonded silicon nitride (SRBSN), the thermal conductivity increases with sintering temperature. The β-Si₃N₄ (silicon nitride) crystals of SRBSN ceramics were synthesized and characterized to investigate the relation between the crystal structure and the lattice oxygen content. The hot-gas extraction measurement result and the crystal structure obtained using Rietveld analysis suggested that the unit cell size of the β-Si₃N₄ crystal increases with the decrease in the lattice oxygen content. This result is reasonable considering that the lattice oxygen with the smaller covalent radius substitutes nitrogen with the larger one in the β-Si₃N₄ crystals. The lattice oxygen content decreased with increasing sintering temperature which also correlated with increase in thermal conductivity. Moreover, it is noteworthy from the viewpoint that it may be possible to apply the lattice constant analysis for the nondestructive and simple measurement of the lattice oxygen content that deteriorates the thermal conductivity of the β-Si₃N₄ ceramics.     

Mechanical property enhancement of aligned multi-walled carbon nanotube sheets and composites through press-drawing process

A solid-state drawing and winding process was done to create thin aligned carbon nanotube (CNT) sheets from CNT arrays. However, waviness and poor packing of CNTs in the sheets are two main weaknesses restricting their reinforcing efficiency in composites. This report proposes a simple press-drawing technique to reduce wavy CNTs and to enhance dense packing of CNTs in the sheets. Non-pressed and pressed CNT/epoxy composites were developed using prepreg processing with a vacuum-assisted system. Effects of pressing on the mechanical properties of the aligned CNT sheets and CNT/epoxy composites were examined. Pressing with distributed loads of 147, 221, and 294 N/m showed a substantial increase in the tensile strength and the elastic modulus of the aligned CNT sheets and their composites. The CNT sheets under a press load of 221 N/m exhibited the best mechanical properties found in this study. With a press load of 221 N/m, the pressed CNT sheet and its composite, respectively, enhanced the tensile strength by 139.1 and 141.9%, and the elastic modulus by 489 and 77.6% when compared with non-pressed ones. The pressed CNT/epoxy composites achieved high tensile strength (526.2 MPa) and elastic modulus (100.2 GPa). Results show that press-drawing is an important step to produce superior CNT sheets for development of high-performance CNT composites.     

Renal glomerular fibrosis in a cat

Renal glomerular fibrosis was observed in a 1-year-old spayed female Japanese domestic cat that showed clinically advanced renal failure. In the glomeruli, increased homogeneous materials were stained strongly with aniline blue by Masson's trichrome and positive for anti-type III collagen antibody by immunohistochemical staining, causing mesangial sclerosis and capillary collapse. By electron microscopy, randomly arranged fibrils were observed in the expanded subendothelial and mesangial areas, and the fibrils showed periodicity characteristic of collagen fibers in longitudinal sections. These findings of glomerular lesions closely resemble those of human "collagenofibrotic glomerulonephropathy," which has recently been described as a new type of glomerulonephropathy.     

A Modeling of Singing Voice Robust to Accompaniment Sounds and Its Application to Singer Identification and Vocal-Timbre-Similarity-Based Music Information Retrieval

This paper describes a method of modeling the characteristics of a singing voice from polyphonic musical audio signals including sounds of various musical instruments. Because singing voices play an important role in musical pieces with vocals, such representation is useful for music information retrieval systems. The main problem in modeling the characteristics of a singing voice is the negative influences caused by accompaniment sounds. To solve this problem, we developed two methods, accompaniment sound reduction and reliable frame selection. The former makes it possible to calculate feature vectors that represent a spectral envelope of a singing voice after reducing accompaniment sounds. It first extracts the harmonic components of the predominant melody from sound mixtures and then resynthesizes the melody by using a sinusoidal model driven by these components. The latter method then estimates the reliability of frame of the obtained melody (i.e., the influence of accompaniment sound) by using two Gaussian mixture models (GMMs) for vocal and nonvocal frames to select the reliable vocal portions of musical pieces. Finally, each song is represented by its GMM consisting of the reliable frames. This new representation of the singing voice is demonstrated to improve the performance of an automatic singer identification system and to achieve an MIR system based on vocal timbre similarity.