Low‐frequency sound absorption of organic hybrid comprised of chlorinated polyethylene and N,N′‐dicyclohexyl‐2‐benzothiazolyl sulfenamide

We investigated the sound absorption characteristics of an organic hybrid material comprised of chlorinated polyethylene (CPE) as the matrix polymer and N,N′‐dicyclohexyl‐2‐benzothiazolyl sulfenamide (DBS) as the second component of an organic low‐molecular‐weight compound. We found specific crystallites, obtained by annealing, that generated new absorption for a low‐frequency sound in a CPE/DBS blend. We observed two sound absorption peaks, around 300 and 1000 Hz, in the annealed CPE/DBS (50 : 50 w/w) blends, whereas those peaks were not observed in the untreated sample. There were two kinds of crystals with different melting points in the annealed samples. It was confirmed that the crystals with the lower melting point brought about sound absorption at a low frequency. The crystals that had the lower melting point were smaller and/or more disordered than the crystals that had the higher melting point. We calculated the fraction of these two types of crystals from differential scanning calorimetry and wide‐angle X‐ray diffraction measurements. The annealing or reannealing temperature specified the fraction of the crystal with the lower melting point, and the obtained crystal fraction characterized sound absorption frequency. Therefore, it is possible to control the sound absorption frequency of an organic hybrid by heat treatment such as annealing. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Polarization dependent optical absorption properties of single-walled carbon nanotubes and methodology for the evaluation of their morphology

Polarization dependence of the optical absorption properties of SWNTs is presented and investigated in detail for the energy range 0.5-6 eV. We found that the absorption peaks in the UV region at approximately 4.5 and 5.25 eV exhibit remarkable and different dependencies on the morphology of the SWNT film, or equivalently, on the incident light polarization relative to the SWNT axis. An analytical pathway to evaluate the physical degree of SWNT alignment for a vertically aligned SWNT film is developed with both transition dipoles parallel and perpendicular to the SWNT axis taken into account. This analytical procedure, coupled with polarized optical absorption measurements performed on the vertically aligned SWNT film grown on substrates, leads to the determination of the bare optical absorption cross-section of SWNTs for both parallel and perpendicular to SWNT axis. In the end, the proposed methodology for evaluating the SWNT film morphology is applied to investigate the transient change of the degree of alignment in the growth process of our vertically aligned SWNT films.     

Terahertz time domain attenuated total reflection spectroscopy with an integrated prism system

We demonstrated attenuated total reflection (ATR) spectroscopy with an integrated prism system that included a terahertz emitter, a terahertz receiver, and an ATR prism. The ATR prism had two internal off-axis parabolic mirrors for, respectively, collimating and focusing the terahertz waves. The Fresnel loss at each interface was reduced, and the total propagation efficiency was 3.36 times larger than when using a non-integrated prism system. The refractive index of water samples calculated from the experimental data showed good agreement with values reported in the literature.     

Dirac Cone Spin Polarization of Graphene by Magnetic Insulator Proximity Effect Probed with Outermost Surface Spin Spectroscopy

The effects of the proximity contact with magnetic insulator on the spin‐dependent electronic structure of graphene are explored for the heterostructure of single‐layer graphene (SLG) and yttrium iron garnet Y₃Fe₅O₁₂ (YIG) by means of outermost surface spin spectroscopy using a spin‐polarized metastable He atom beam. In the SLG/YIG heterostructure, the Dirac cone electrons of graphene are found to be negatively spin polarized in parallel to the minority spins of YIG with a large polarization degree, without giving rise to significant changes in the π band structure. Theoretical calculations reveal the electrostatic interfacial interactions providing a strong physical adhesion and the indirect exchange interaction causing the spin polarization of SLG at the interface with YIG. The Hall device of the SLG/YIG heterostructure exhibits a nonlinear Hall resistance attributable to the anomalous Hall effect, implying the extrinsic spin–orbit interactions as another manifestation of the proximity effect.     

Chronic psychosocial factors and acute physiological responses to laboratory-induced stress in healthy populations: A quantitative review of 30 years of investigations.

[Correction Notice: An erratum for this article was reported in Vol 135(5) of Psychological Bulletin (see record 2009-12487-006). There is an error in Table 1. On p. 840 the entry for Hill et al. 1987 should be Masters et al. 2004.] This meta-analysis included 729 studies from 161 articles investigating how acute stress responsivity (including stress reactivity and recovery of hypothalamic-pituitary-adrenal [HPA] axis, autonomic, and cardiovascular systems) changes with various chronic psychosocial exposures (job stress; general life stress; depression or hopelessness; anxiety, neuroticism, or negative affect; hostility, aggression, or Type-A behavior; fatigue, burnout, or exhaustion; positive psychological states or traits) in healthy populations. In either the overall meta-analysis or the methodologically strong subanalysis, positive psychological states or traits were associated with reduced HPA reactivity. Hostility, aggression, or Type-A behavior was associated with increased cardiovascular (heart rate or blood pressure) reactivity, whereas anxiety, neuroticism, or negative affect was associated with decreased cardiovascular reactivity. General life stress and anxiety, neuroticism, or negative affect were associated with poorer cardiovascular recovery. However, regarding the sympathetic nervous system and parasympathetic nervous system, there were no associations between the chronic psychosocial factors and stress reactivity or recovery. The results largely reflect an integrated stress response pattern of hypo- or hyperactivity depending on the specific nature of the psychosocial background. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Introduction feasibility of DHC with CGS in commercial and residential sectors viewed from energy saving effect in whole energy system in japan

District Heating and Cooling (DHC) combined with a Cogeneration System (CGS) is one of the most efficient ways to supply energy to the commercial and residential sectors. This paper discusses the feasibility of introducting DHC from the viewpoint of the overall energy saving effect in Japan's energy system as a whole. Although DHC is efficient for congested areas such as urban business centers, these areas are limited in capacity and number. In our evaluation of the feasibility of introducing DHC, we consider the energy demand density profiles of Japan's commercial and residential sectors in order to determine the installed DHC capacity that is optimal for meeting the growth of energy demand. This paper also discusses operating patterns of CGS and of boilers in DHC. In order to improve the efficiency of individual DHC facilities, CGS should be operated so as to satisfy heating demand, resulting in a low annual load factor. On the other hand, the overall efficiency of the energy system requires an improvement of the overall load factor of CGS, which is achievable by combined use of CGS and boilers. Operation of CGS in this manner improves the feasibility of the introduction of DHC. © 2000 Scripta Technica, Electr Eng Jpn, 133(2): 31–42, 2000     

Economic evaluation of independent power producers viewed from total generating costs of electric power systems

In Japan, electric power utilities purchase electricity from independent power producers (IPPs) through competitive bidding; the IPP evaluation is based on the avoided costs of corresponding generators of utilities. In this evaluation, however, nonpricing factors such as power flow constraints in the electric power system cannot be considered. In this paper, we propose a new approach to evaluate economic impacts of IPPs, the IPP electricity being priced on the basis of total generating costs of the electric power utilities. Such a price to purchase the electricity of IPPs is referred to as the “break‐even cost.” The main results are summarized as follows: 1) Break‐even cost depends on not only the power flow constraints in the system, but also various IPP factors such as generating pattern, location, and capacity, 2) Break‐even cost for the base‐type IPP is higher than the avoided cost of corresponding utility generators, because IPPs located on demand sides can reduce the transmission power loss in the electric power system, 3) Break‐even cost is affected by available capacity of utility generators, especially for the peak‐type IPP generating only during peak demand periods. © 2000 Scripta Technica, Electr Eng Jpn, 133(2): 20–30, 2000     

Homolog of a-factor receptor gene in Saccharomyces exiguus

Homologs of Saccharomyces cerevisiae STE3, a -factor receptor gene were detected from S. exiguus NFRI 3539 by low stringency Southern hybridization. This strain might have at least two types of homolog. One of these homologs, designated as e-STE3 was cloned. Its nucleotide sequence revealed 60% identity to STE3. The putative protein coding region consisted of 453 amino acid residues. The amino acid sequence identity between STE3 and e-STE3 was 62%, and that of the N-terminal 303 amino acid residues considered to be the pheromone binding domain was 79%. The e-STE3 sequence submitted to the DDBJ/EMBL/GenBank data libraries is available under Accession Number AB003086. © 1998 John Wiley & Sons, Ltd.     

Fabrication of an atomic resolution low cost STM-SNOM hybrid probe

We derived a simple method to fabricate STM-SNOM hybrid probes obtained from commercial cheap communication optical fibers. The tips are fabricated by a methodology that combines two well-known techniques: the selective attack by a buffered solution and the protected layer chemical etching, in a single new one-step technique. The tailored probes are then sputtered by metal and mounted on a STM setup. The usual difficulties of integrating the optical fiber in the STM head are solved originally with a particular home made mount described in details. We will show that the resulting probes reach atomic resolution on both vertical and horizontal scale, and that the optical imaging is free of artifacts and satisfactory with a lateral resolution in the order of lamda/20, as far as we know the finest resolution obtained with a system based on a hybrid fiber probe. We believe that our methodology is very interesting for its simplicity of realization and for the good resolving power in both SNOM and STM modes.     

Cross-section analysis of electric devices by scanning capacitance microscope

Carrier influence of semiconductor devices is important as it affects the function of the device. In this experiment, the carrier density distribution in the cross-section of semiconductor device was analyzed by SCM: Scanning Capacitance Microscope which is one of the measuring mode of SPM: Scanning Probe Microscope.This paper describe measurement result of change in carrier density by the gate voltage at p channel area of CMOS device and its efficiency to investigating dopant profile on 16MDRAM cross-section.