Effect of Hydrogen Atmosphere on Pyrolysis of Cured Polycarbosilane Fibers

SiC-based fibers with various chemical compositions were synthesized using an irradiation-curing process. Polycarbosilane (PCS) fibers were cured by irradiation with an electron beam in a helium atmosphere. The cured PCS fibers were pyrolyzed at 1300°C under controlled hydrogen or argon atmospheres, and SiC fibers with C/Si of 0.84 to 1.56 were obtained. The fibers consisted of <1.0 wt% O, <0.2 wt% N, <0.1 wt% H, with the balance being Si and C. The mechanism of pyrolytic transformation of cured PCS to SiC-based ceramics was investigated using TG/DTA analysis. Greater mass losses were observed during pyrolysis in a hydrogen atmosphere than in argon. This result suggests that the hydrogen atmosphere suppresses H₂ evolution and helps to remove excess carbon as CH₄ during pyrolysis. The microstructure and mechanical properties of the resulting SiC-based fibers were found to be very dependent on their C/Si chemical compositions.     

The initial step of the thermal unfolding of 3-isopropylmalate dehydrogenase detected by the temperature-jump Laue method

A temperature-jump (T-jump) time-resolved X-ray crystallographictechnique using the Laue method was developed to detect small,localized structural changes of proteins in crystals exposedto a temperature increase induced by laser irradiation. In achimeric protein between thermophilic and mesophilic 3-isopropylmalatedehydrogenases (2T2M6T), the initial structural change uponT-jump to a denaturing temperature (~90°C) was found tobe localized at a region which includes a ß-turn and aloop located between the two domains of the enzyme. A mutant,2T2M6T-E110P/S111G/S113E, having amino acid replacements inthis ß-turn region with the corresponding residues ofthe thermophilic enzyme, showed greater stability than the originalchimera (increase of T_m by ~10°C) and no T-jump-inducedstructural change in this region was detected by our method.These results indicate that thermal unfolding of the originalchimeric enzyme, 2T2M6T, is triggered in this ß-turn region.     

Fabrication of single-wall carbon nanotubes within the channels of a mesoporous material by catalyst-supported chemical vapor deposition

Diameter-controlled single-wall carbon nanotubes (SWCNTs) have been synthesized using Co, Fe/Co and Rh/Pd alloy nanoparticles trapped within the one-dimensional channels of a mesoporous materials (Folded Sheets Mesoporous material: FSM-16) by catalyst-supported chemical vapor deposition (CCVD) using ethanol as carbon source at 973-1173 K. The SWCNTs synthesized are characterized by transmission electron microscopy, Raman spectroscopy and photoluminescence spectroscopy. The yield, diameter distribution and quality of the SWCNTs strongly depend on the reaction temperature during CCVD. The product synthesized at 1173 K contains only SWCNTs, in marked contrast to those synthesized at lower temperatures. As the reaction temperature decreases, the relative abundance of multi-wall carbon nanotubes against SWCNTs significantly increases, whereas the mean diameter of SWCNTs increases as reaction temperature increases. The results show that a careful control of the reaction temperature is crucial to fabricate diameter-controlled SWCNTs from the channels of FSM-16.     

Separation selectivity of aqueous polyethylene glycol-based separation systems: DSC, LC and aqueous two-phase extraction studies

The distribution behavior of n-alcohols, ketones and nitroalkanes in aqueous liquid chromatography with a column packed with polyethylene glycol (PEG) gel, TSKgel Ether-250, was compared with that in aqueous two-phase systems (ATPSs) formed from PEG and Na₂SO₄ or (NH₄)₂SO₄. The plots of the distribution data obtained for the PEG gel system against those for the ATPS reveal that the separation selectivities exerted by the PEG gel system and the PEG-based ATPS are approximately the same. Differential scanning calorimetry studies on aqueous PEG solutions suggest that PEG polymer forms a hydration structure of which the composition is 50% (w/w) PEG or the hydration number per ethylene oxide is 2.4 and the separation selectivity of the PEG-water systems can be attributed to partition of solute compounds into the hydrated PEG polymer structure.     

Novel synthesis of poly(methyl methacrylate) brush encapsulated silica particles

Silica (SiO₂)‐crosslinked polystyrene (PS) particles possessing photofunctional N,N‐diethyldithiocarbamate (DC) groups on their surface were prepared by the free‐radical emulsion copolymerization of a mixture of SiO₂ (diameter = 20 nm), styrene, divinyl benzene, 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC), and 2‐hydroxyethyl methacrylate with a radical initiator under UV irradiation. In this copolymerization, the inimer VBDC had the formation of a hyperbranched structure by a living radical mechanism. The particle sizes of such core–shell structures [number‐average particle diameter (D_n) = 35–40 nm] were controlled by the variation of the feed amounts of the monomers and surfactant, or emulsion system. The size distributions were relatively narrow (weight‐average particle diameter/D_n ≈ 1.05). These particles had DC groups on their surface. Subsequently, poly(methyl methacrylate) brush encapsulated SiO₂ particles were synthesized by the grafting from a photoinduced atom transfer radical polymerization approach of methyl methacrylate initiated by SiO₂‐crosslinked PS particles as a macroinitiator. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Critical Deposition Condition of CoNiCrAlY Cold Spray Based on Particle Deformation Behavior

Previous research has demonstrated deposition of MCrAlY coating via the cold spray process; however, the deposition mechanism of cold spraying has not been clearly explained—only empirically described by impact velocity. The purpose of this study was to elucidate the critical deposit condition. Microscale experimental measurements of individual particle deposit dimensions were incorporated with numerical simulation to investigate particle deformation behavior. Dimensional parameters were determined from scanning electron microscopy analysis of focused ion beam-fabricated cross sections of deposited particles to describe the deposition threshold. From Johnson-Cook finite element method simulation results, there is a direct correlation between the dimensional parameters and the impact velocity. Therefore, the critical velocity can describe the deposition threshold. Moreover, the maximum equivalent plastic strain is also strongly dependent on the impact velocity. Thus, the threshold condition required for particle deposition can instead be represented by the equivalent plastic strain of the particle and substrate. For particle-substrate combinations of similar materials, the substrate is more difficult to deform. Thus, this study establishes that the dominant factor of particle deposition in the cold spray process is the maximum equivalent plastic strain of the substrate, which occurs during impact and deformation.     

Administration of docosahexaenoic acid influences behavior and plasma catecholamine levels at times of psychological stress

The purpose of the present research was to clarify the effect of docosahexaenoic acid (DHA) intake on behavior and plasma catecholamines (CA). In Study 1, 42 students took either DHA-rich oil capsules containing 1.5–1.8 g DHA/d or control oil capsules containing 97% soybean oil plus 3% of another fish oil for 3 mon in a double-blind fashion. They took a psychological test (PF Study) at the start and end of the study. This study started at the end of summer vacation and ended just before the final exams. In the control group, external aggression (aggression against others) in PF Study was significantly increased at the end of the study as compared with that measured at the start (+8.9%), whereas it was not significantly changed in the DHA group (?1.0%). In a similar double-blind study (Study 2), we measured external aggression under nonstressful conditions. External aggression slightly decreased in the control group, whereas there were no significant changes in the DHA group. In Study 3 with 14 students, plasma CA were measured at the start and end of capsule administration period of 2 mon. Subjects were under continuous stress of the final exams that lasted throughout the whole study period. The ratio of plasma epinephrine to norepinephrine concentrations was significantly increased in the DHA group (78%), whereas it stayed at the same level in the control group. In Study 4, mice were fed either DHA-deficient diet or -sufficient diet for 4 wk, and their rearing frequency (an anxiety index) was measured. In the DHA-sufficient group, the rearing frequency was significantly less than in the other group. These effects of DHA intake may be applied to people in an attempt to ameliorate stress-related diseases.     

Temperature and frequency dependence of dielectric loss of Ba(Mg1/3Ta2/3)O3 microwave ceramics

Ba(Mg_1/3Ta_2/3)O₃ ceramic possessing extremely high Q × f value of more than 300 THz at microwave frequency was developed in our previous study. It is of great interest to understand the mechanism of microwave absorption in such a practical material. In the present study we report on the temperature dependence of the dielectric loss in the Ba(Mg_1/3Ta_2/3)O₃. The mechanism of the microwave absorption is discussed using two phonons difference process. The samples were prepared by conventional solid state reaction and sintered at 1893 K in oxygen atmosphere. Dielectric properties in the microwave range were measured by Hakki & Colemann and resonant cavity methods in the temperature range of 20–300 K. Whispering gallery mode technique was used for the measurement of the dielectric properties at the millimeter wave frequency. Dielectric loss of the Ba(Mg_1/3Ta_2/3)O₃ at the microwave frequency increases with temperature between 200 and 300 K in general agreement with the theory of intrinsic dielectric loss derived from the two phonon difference process. However below 200 K, the dielectric loss has shown a distinctive behavior with a loss peak at 40 K. It was inferred that the loss peak of the Ba(Mg_1/3Ta_2/3)O₃ was caused by the local orientation polarization having dispersion at the microwave frequency.     

MiR-10a in Pancreatic Juice as a Biomarker for Invasive Intraductal Papillary Mucinous Neoplasm by miRNA Sequencing

New biomarkers are needed to further stratify the risk of malignancy in intraductal papillary mucinous neoplasm (IPMN). Although microRNAs (miRNAs) are expected to be stable biomarkers, they can vary owing to a lack of definite internal controls. To identify universal biomarkers for invasive IPMN, we performed miRNA sequencing using tumor-normal paired samples. A total of 19 resected tissues and 13 pancreatic juice samples from 32 IPMN patients were analyzed for miRNA expression by next-generation sequencing with a two-step normalization of miRNA sequence data. The miRNAs involved in IPMN associated with invasive carcinoma were identified from this tissue analysis and further verified with the pancreatic juice samples. From the tumor-normal paired tissue analysis of the expression levels of 2792 miRNAs, 20 upregulated and 17 downregulated miRNAs were identified. In IPMN associated with invasive carcinoma (INV), miR-10a-5p and miR-221-3p were upregulated and miR-148a-3p was downregulated when compared with noninvasive IPMN. When these findings were further validated with pancreatic juice samples, miR-10a-5p was found to be elevated in INV (p = 0.002). Therefore, three differentially expressed miRNAs were identified in tissues with INV, and the expression of miR-10a-5p was also elevated in pancreatic juice samples with INV. MiR-10a-5p is a promising additional biomarker for invasive IPMN.     

Effects of the incorporation of silver and gold nanoparticles on the photoanodic properties of rose bengal sensitized TiO2 film electrodes prepared by sol-gel method

Rose bengal-deposited TiO₂ film electrodes bearing dispersed Ag or Au nanoparticles were prepared by the sol-gel method. The dye-induced visible region photoresponse of the electrodes decreased with increasing Ag content up to a mole ratio of Ag/TiO₂ = 0.0207, while the UV photoresponse increased. On the other hand, the dye-induced visible region photoresponse decreased to a less extent by incorporation of a larger amount of Au particles of Au/TiO₂ = 0.06, along with decreased UV photoresponse. The effects of the metal particles on the dye sensitization of the electrodes were discussed in terms of band edge fluctuation induced by the surface metal particles, Schottky barriers at TiO₂/metal interfaces, and surface plasma resonance.