An improved cryofixation method: cryoquenching of small tissue blocks during microwave irradiation

The metal contact method of rapid freezing is greatly improved by irradiating the specimen with microwaves at 2.45 GHz for a short period of time (50 ms), while pushing the specimen onto the surface of the copper block cooled by liquid N₂. The microwave irradiation, together with two technical improvements (a light-mass plunger and a recently developed β-gel shock absorber) for preventing bounce, produces a good freezing zone for squid retina, with high reproducibility for each experimental trial, extending from the contact surface to a depth of about 15 μm, which is comparable to the depth obtained by the metal contact method using liquid He in the absence of microwave irradiation. A good freezing zone was also experimentally demonstrated in specimens of rat liver and heart muscle. Microwave irradiation does not have appreciable effects on the ultrastructure of squid retina. The mechanism underlying the improvement in the rapid freezing under the microwave irradiation is discussed.     

Structural Study on PbO–SiO2 Glasses by X-Ray and Neutron Diffraction and 29Si MAS NMR Measurements

Structure of x PbO–(100− x )SiO₂ ( x =25–89) glasses has been investigated by means of the X-ray and neutron diffraction and ²⁹Si MAS NMR measurements. In the radial distribution functions of all the glasses, the Pb–O correlation was observed at 0.23 nm, indicating that the PbO₃ trigonal pyramids units do exist in the whole glass forming composition range. Furthermore the existence of the first Pb–Pb correlation at ∼0.385 nm in the whole composition range suggests that the basic structural unit is considered to be a Pb₂O₄ unit, which consists of the edge-shared PbO₃ trigonal pyramids. These results strongly imply that the Pb₂O₄ units participate in the glass network constructed by SiO₄ tetrahedra even at low PbO content. Differing from other lead-containing glass systems, these structural characteristics of Pb ions in the PbO–SiO₂ glass system are responsible for the extremely wide glass-forming region.     

Fabrication of particle-free thin films by laser ablation combined with an electron beam

Particle-free silicon and nickel thin films were successfully fabricated by laser-ablating a melted section of their target surface, which gives a high evaporation pressure at the melting point. The influence of direct evaporation from a melted target was reduced negligibly by melting the target only locally with a focused electron beam (e-beam) and increasing the laser frequency. The silicon films fabricated by the present method, pulse laser deposition of a partially molten target, were able to firmly adhere to the substrates and withstood steel needle scratching, unlike e-beam-evaporated films.     

Synthesis and electronic property of platinum nanowire and nanoparticle in mesoporous silica template

Platinum nanowires and nanoparticles were selectively synthesized in mesoporous silicas FSM-16 and HMM-1. The nanowires are 3 nm in diameter and several hundred nm to μm in length with high crystallinity. Pt nanowires and nanoparticles can be isolated by dissolving silica matrix with HF. The Pt wires extracted from organosilica HMM-1 have a nanonecklace structure, while the wires from siliceous FSM-16 have a nanorod structure. The extracted Pt nanoparticles (3 nm in size) on HOPG show the Coulomb staircase phenomena in STM/STS analysis. The mechanism for formation of the Pt nanowires is based on the migration of Pt ions in the mesoporous channels.     

Structural characterization of photoreduced complete and incomplete cubane-type molybdenum oxide clusters in CO and their catalytic behavior in propene metathesis reaction

SiO2-impregnated complete and incomplete cubane-type molybdenum oxide clusters such as [(RhCp*)₄Mo₄O₁₆] (I) and [(RhCp*)₂Mo₃O₉(OMe)₄] (II) were photoreduced with a UHP-Hg lamp (> 365 nm) in CO, resulting in the formation of catalytically active species for propene metathesis at 300 K. The CO-photoreduced Mo oxide clusters were characterized by EXAFS, IR, XPS and TPD technique. The results suggest that the Mo-O_4c (four-centered bridging oxygens) in I were specifically reduced with CO under the illumination to produce two sets of subcarbonyl species, e.g., those characteristic of the IR bands at 2061 and 2021 cm^–1, which were thermally inactive for the¹³CO exchange reaction but very active under illumination at 300 K, possibly assignable to Mo(CO)x (x = 2, 3), whereas those at 2092 and 2035 cm^–1 due to Rh(CO)₂, which were readily exchangeable with¹³CO at 300 K in dark. Removal of both carbonyls attached on Rh and Mo in photoreduced I and II by evacuation at 375–440 K led to the formation of oxygen-deficient Mo⁴+/Mo⁵⁺ sites, which exhibited high catalytic activities in propene metathesis at 300 K to produce an equimolar mixture of ethene and 2-butenes. The CO-photoreduced incomplete cubane Mo oxide cluster (II) exhibited higher activities and higher trans/cis ratios of 2-butenes in the reaction, compared with those on the photoreduced I.     

Administration of docosahexaenoic acid influences behavior and plasma catecholamine levels at times of psychological stress

The purpose of the present research was to clarify the effect of docosahexaenoic acid (DHA) intake on behavior and plasma catecholamines (CA). In Study 1, 42 students took either DHA-rich oil capsules containing 1.5–1.8 g DHA/d or control oil capsules containing 97% soybean oil plus 3% of another fish oil for 3 mon in a double-blind fashion. They took a psychological test (PF Study) at the start and end of the study. This study started at the end of summer vacation and ended just before the final exams. In the control group, external aggression (aggression against others) in PF Study was significantly increased at the end of the study as compared with that measured at the start (+8.9%), whereas it was not significantly changed in the DHA group (?1.0%). In a similar double-blind study (Study 2), we measured external aggression under nonstressful conditions. External aggression slightly decreased in the control group, whereas there were no significant changes in the DHA group. In Study 3 with 14 students, plasma CA were measured at the start and end of capsule administration period of 2 mon. Subjects were under continuous stress of the final exams that lasted throughout the whole study period. The ratio of plasma epinephrine to norepinephrine concentrations was significantly increased in the DHA group (78%), whereas it stayed at the same level in the control group. In Study 4, mice were fed either DHA-deficient diet or -sufficient diet for 4 wk, and their rearing frequency (an anxiety index) was measured. In the DHA-sufficient group, the rearing frequency was significantly less than in the other group. These effects of DHA intake may be applied to people in an attempt to ameliorate stress-related diseases.     

Preparation of Lead Lanthanum Zirconate Titanate (PLZT, (Pb,La)(Zr,Ti)O3) Fibers by Sol-Gel Method

Lead lanthanum zirconate titanate (PLZT, (Pb,La)(Zr,-Ti)O₃) ceramic fibers were prepared by the sol-gel method from a solution of lead acetate trihydrate, lanthanum isopropoxide, zirconium n -propoxide, and titanium isopropoxide that contained 2-methoxyethanol as the solvent. The sols obtained from the solution were concentrated at 156°-174°C for 2 h. Concentration at higher temperatures resulted in more-viscous sols of higher specific gravities. The concentration resulted in the formation of spinnable sols, which had viscosities >10⁵ mPas and exhibited Newtonian flow properties. These spinnable sols were formed to be so stable that no change in viscosity and spinnability was observed for more than three months when stored in a sealed container at room temperature. Gel-to-ceramic fiber conversion was investigated by means of X-ray diffractometry, infrared spectroscopy, and thermal analysis. Single-phase perovskite PLZT ceramic fibers 5-200 μm in diameter and >20 cm in length were obtained. Scanning electron microscopy (SEM) observation and Brunauer-Emmett-Teller (BET) measurement showed that heat treatment of the fibers at a lower rate resulted in the formation of fibers of denser microstructure. Although the SEM image of the cross section of the fibers revealed a relatively dense microstructure and a laser beam could be transmitted through a fiber 6 mm in length, BET measurement of the fibers indicated that the fibers had more than a few percent of open porosities, and scattering of light was observed in the laser-beam guiding test.     

Contact force detection on a minute aperture mounted optical contact slider using an acoustic emission sensor

Advances in the digital network society require both higher density and higher transfer rates in all sorts of storage systems. Especially in optical recording, the trend toward higher density and larger capacity requires novel surface-recording technologies that can drastically diminish head-to-medium spacing, resulting in an improvement in spatial resolution and, finally, a higher recording density. To this end, we have already proposed a novel contact optical head slider that is able to almost cancel the suspension load by generating hydrodynamic pressure, thus realizing a lower net contact force. Evaluating the dynamic contact force is requisite in realizing its stable sliding operation and higher signal readout performance. In this study, a continuous acoustic emission (AE) signal was utilized to detect the dynamic contact force. AE signal modulation was compared with the applied out-of-plane acceleration on a medium generated by a spindle combined piezo-electric actuator. It was clarified that the detected AE modulation amplitude was approximately proportional to the applied acceleration, and that utilizing AE modulation will be a useful method for evaluating dynamic contact force.