Study on degradation process of polymer electrolyte by solution analysis

Degradation process of Nafion which is one of the polymer electrolyte generally used for polymer electrolyte membrane fuel cell was investigated by solution analysis and structural analysis of eluted species. Nafion degraded by gamma-ray irradiation and heat treatment was immersed in distilled water and the solutions were analyzed using ion chromatograph, total organic carbon (TOC) analyzer, and inductively coupled plasma atomic emission spectrometer (ICP-AES). The solutions after the Fenton reaction were also analyzed with the same methods. Proton, sulfide ion, fluorine ion and organic carbon were eliminated into the solution, and their ratio was changed depending on the degradation method. To determine the eliminated species to the solution, structural analysis of concentrated dissolved species was performed using FT-IR. As the results, the initial process of degradation was detected sensitively in solution analysis compared with membrane analysis, and difference of the degradation process under different conditions was clearly observed. It was also found that new functional group COOH was formed in the eliminated species. These results showed that solution analysis are very simple yet powerful methods to elucidate the degradation process, which can also be applied to actual fuel cell operation to track minute changes in the polymer electrolyte.     

Regulation of Photochemical Energy Transfer Accompanied by Structural Changes in Thylakoid Membranes of Heat-Stressed Wheat

Photosystems of higher plants alleviate heat-induced damage in the presence of light under moderate stressed conditions; however, in the absence of light (i.e., in the dark), the same plants are damaged more easily. (Yamauchi and Kimura, 2011) We demonstrate that regulating photochemical energy transfer in heat-treated wheat at 40 °C with light contributed to heat tolerance of the photosystem. Chlorophyll fluorescence analysis using heat-stressed wheat seedlings in light showed increased non-photochemical quenching (NPQ) of chlorophyll fluorescence, which was due to thermal dissipation that was increased by state 1 to state 2 transition. Transmission electron microscopy revealed structural changes in thylakoid membranes, including unstacking of grana regions under heat stress in light. It was accompanied by the phosphorylation of thylakoid proteins such as D1 and D2 proteins and the light harvesting complex II proteins Lhcb1 and Lhcb2. These results suggest that heat stress at 40 °C in light induces state 1 to state 2 transition for the preferential excitation of photosystem I (PSI) by phosphorylating thylakoid proteins more strongly. Structural changes of thylakoid membrane also assist the remodeling of photosystems and regulation of energy distribution by transition toward state 2 probably contributes to plastoquione oxidation; thus, light-driven electrons flowing through PSI play a protective role against PSII damage under heat stress.     

Domain switching characteristics of lead zirconate titanate piezoelectric ceramics during mechanical compressive loading

To better understand the domain switching characteristics of lead zirconate titanate (PZT) ceramics, the orientations of domains have been directly investigated during loading and unloading using various experimental techniques. Upon loading, linear and non-linear fracture mechanics of the PZT ceramics are observed. The slope of the stress–strain response is attributed mainly to lattice strain and domain switching strain. During the loading process, electrical activity also occurs several times in the PZT ceramics. This activity is related to a lightning-like phenomenon and consists of a bright flash with a click. This electrogenerative event is caused by severe domain switching. The characteristics of domain switching and reverse switching are detected during the loading and unloading processes. The amount of domain switching depends on the grain, due to different stress levels. In addition, two patterns of 90° domain switching systems are characterized, namely (i) 90° turn about the tetragonal c-axis and (ii) 90° rotation of the tetragonal a-axis.     

Effect of chromatic components on facial skin whiteness

Although the color measurement of facial skin becomes more common in dermatology and cosmetics, little is known about the relationship between subjective color perception and colorimetric values in facial skin. In this study, the possible relationships among perceived whiteness and the metric lightness, chroma and hue angle of Japanese females' facial skin color were investigated. First, the perceived brightness of the facial skin of Japanese females was evaluated visually and compared with metric lightness, chroma and hue angle, and the effect of hue and chroma on the perceived brightness was discussed. Second, a psychophysical experiment on the whiteness of the facial images and synthesized skin color plate images was conducted for examining the effect of hue and chroma on the perceived whiteness more precisely and independently. The results of two experiments showed that in regard to the facial skin color of the Japanese female, metric lightness disagrees with perceived whiteness or brightness in a narrow lightness range. The reddish facial skin color appeared brighter or whiter than that of a yellowish one in high lightness regions, and the low‐chroma facial skin color appeared brighter or whiter than a high‐chroma one. However, in the color plate images, a change in perceived whiteness by hue could not be confirmed, and the change in perceived whiteness by chroma was weaker than that from facial images. These results indicated that a higher‐level process of face recognition affected whiteness perception, and the criterion of facial skin whiteness was determined by facial skin color distribution. © 2011 Wiley Periodicals, Inc. Col Res Appl, 2011;     

Sol-Gel Preparation of Transparent and Conductive Aluminum-Doped Zinc Oxide Films with Highly Preferential Crystal Orientation

Transparent aluminum-doped zinc oxide (ZnO) films were prepared via the sol-gel method on silica-glass substrates from 2-methoxyethanol solutions of zinc acetate and aluminum chloride that contained monoethanolamine. Dip coating was conducted at room temperature, with substrate withdrawal rates of 1.2-7.0 cm/min. After each deposition, the films were heat-treated in air at 200°-450°C for 10 min (pre-heat-treatment). After six to fourteen layers had been deposited, the films were then subjected to annealing in air at 500°-800°C for 1 h (the first post-heat-treatment), followed by annealing in nitrogen at 500°-700°C for 15 min to 4 h (the second post-heat-treatment). All the films obtained were transparent and showed only an extremely sharp ZnO (002) peak in the X-ray diffractometry (XRD) patterns. The effects of the aluminum content, the substrate withdrawal speed, and the heat-treatment conditions on the electrical resistivity of the films were studied. All these factors strongly affected the resistivity. The lowest resistivity value (6.5 10^-3 Omegacm) was achieved in a film that contained 0.5 at.% aluminum, prepared with a low substrate withdrawal speed (1.2 cm/min), and a pre-heat-treatment of individual layer at 400°C in air and a post-heat-treatment of the entire film at 600°C in air, followed by a post-heat-treatment at 600°C in nitrogen. These preparation parameters also affected the degree of crystal orientation, which was revealed by the intensity of the ZnO (002) XRD peak. Higher crystal orientation was effective in reducing the film resistivity, whereas the higher grain-packing density and possible aluminum segregation were thought to have positive and negative effects, respectively, in reducing the resistivity.     

Analysis of Eddy‐Current Losses in Solid Iron Under dc‐Biased Magnetization Considering Minor Hysteresis Loops

In designing solid‐pole synchronous machines, it is important to take into account the surface eddy‐current losses in the field pole cores. In this study, a solid‐iron ring specimen is adopted as an approximate model of solid‐pole surfaces in order to conduct a fundamental study of the surface losses. The influence of the minor hysteresis loops on the losses under dc‐biased magnetization is investigated. The losses in the ring under dc‐biased magnetization are measured and analyzed by finite element analysis (FEA). The losses computed by the FEA considering minor loops are nearly the same as those measured. In contrast, the eddy‐current losses computed by FEA without considering minor loops are considerably inaccurate because the incremental permeability is overestimated and the skin depth is underestimated. It is important to consider hysteresis for the accurate calculation of the surface eddy‐current losses under dc‐biased magnetization.     

A DNA duplex with extremely enhanced thermal stability based on controlled immobilization on gold nanoparticles

The effect of DNA loadings on the thermal stability of DNA duplex immobilized on gold nanoparticles has been investigated. The modestly loaded duplexes on the gold nanoparticles showed enhanced thermal stability, as compared to that of the free duplex (without gold nanoparticles). However, the highly loaded duplex showed stability similar to that of free duplex. The stability could be controlled over a wide temperature range simply by varying the salt concentration (over 50 degrees C). Additionally, the gold nanoparticles with modestly loaded oligonucleotides could be used as nanoprobes for effective and fast strand exchange reactions, based on the increased thermal stability of the immobilized duplex. These results indicate that the interaction between the duplex and the nanoparticle surface plays an important role in determining the stability of the duplex.     

Analysis and evaluation of the ionic interaction of the novel soft contact lenses using the zwitterionic polymer gel

In the zwitterionic polymer gel which has cationic and anionic groups inside, it forms a complex to producing stability by adding thermal energy. We reported the behavior induced by the ionic interaction of them and the impact that a nonionic surfactant could exert on the complex formation. We had heating experiments of the zwitterionic polymer gel in PBS with a nonionic surfactant added. We analyzed DSC and measured the diameter, stress and flexure of heated the gel. As the result, it has been demonstrated that formation of strong ionic interactions inside the gel can be achieved by heating them in a solution containing the nonionic surfactant. It has been also demonstrated that the ratio of bound water is increased within the gel, promising an enhanced strength. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009