Analysis of formaldehyde, acetaldehyde and oligomers in recycled polyethylene terephthalate

Formaldehyde (FA), acetaldehyde (AA) and oligomers in recycled polyethylene terephthalate (PET) were analyzed by HPLC. All of the physically recycled PET contained detectable levels of FA, AA and oligomers, and the levels were almost the same as in used bottles. Most superclean-like and chemically recycled PET contained lower levels than new pellets. These compounds showed no decrease upon physical recycling, but showed a marked decrease upon superclean-like recycling. In PET sheets made using physically recycled PET, FA was decreased, though AA was increased by the sheeting process as same as new one. FA, AA and oligomers originated from PET resin and their levels in recycled products were almost equivalent to those in new products. It was concluded that there is no particular safety concern about their presence in recycled PET.     

Pseudophase information from the complex analytic signal of speckle fields and its applications. Part II: statistical properties of the analytic signal of a white-light speckle pattern applied to the microdisplacement measurement

To provide a theoretical background for the superiority of the signal-domain phase-only correlation (SDPOC) technique proposed here for microdisplacement measurement, we study the first- and the second-order statistical properties of the complex amplitude of an analytic signal of a white-light speckle pattern, under the assumption of a Gaussian random process, and give a formula for the autocorrelation function of the pseudophase associated with the complex analytic signal. Based on these results, we show mathematically that SDPOC has a performance advantage over conventional intensity-based correlation techniques.     

Analysis of residual solvents in natural flavorings by headspace GC using the standard addition method

Headspace GC using the standard addition method has been developed for the simultaneous determination of organic solvents in natural flavorings. The procedure can be outlined as follows: an aliquot of the sample is transferred to a 10 mL vial. To each vial, a DMSO solution containing solvents at different concentrations is added as the standard solution. The vials are kept at 50 degrees C (for automatic injection) or 40 degrees C (for hand-operated injection) for 40 minutes. One mL of the vapor phase in each vial is injected into a gas chromatograph equipped with an Aquatic-2 column (0.25 mm i.d. x 60 m). To evaluate this method, we conducted a performance study in collaboration with 10 laboratories, using ginger oleoresin. We analyzed 6 solvents (methanol, 2-propanol, acetone, dichloromethane, hexane, and 1,1,2-trichloroethene) for which the maximum residue limits are established in Japan's Specifications and Standards for Food Additives. Methanol and acetone existed in the ginger oleoresin, so only the other that four kinds of solvents were added to it. Eight of the laboratories used automatic injection, while the remaining two used hand-operated injection. Statistical analyses were conducted on the data obtained from the 8 laboratories. Repeatability standard deviations (RSDr) ranged from 4.3 to 11.4%, and reproducibility standard deviations (RSDR) ranged from 8.4 to 19.0%.     

Production of low electron temperature ECR plasma for plasma processing

Low-electron-temperature ECR plasma with high electron density was realized under the mirror magnetic field configuration in the H₂ and the Ar/N₂ plasma. Especially, the electron temperature was observed to be less than 2 eV in the Ar/N₂ plasma. It was found from the calculation of particle and power balance in steady state that the decrease in the electron temperature observed in the Ar/N₂ plasma was due to the effect of the magnetic-mirror confinement of the N₂ plasma. Furthermore, our calculated results suggest that the effect of magnetic-mirror on the decrease in the electron temperature depends on the collisional cross section between electrons and neutral particles.     

Structural Study of PbO–B2O3 Glasses by X-ray Diffraction and 11B MAS NMR Techniques

The structure of PbO–B₂O₃ glasses has been investigated in the composition range of 25–80 mol% PbO by using X-ray diffraction and ¹¹B NMR techniques. The well-separated peaks due to Pb–O and Pb–Pb pairs were first observed in the radial distribution function, and peak deconvolution was performed by using a pair function method. The average coordination number of lead atoms was determined to be about 6 in the low-PbO-content region and about 3 in the high-PbO-content region. With an increase of PbO content, the peaks at 0.24 and 0.40 nm shifted to shorter distances, and especially the latter peak drastically increased in intensity in the composition range >50 mol% PbO. It was suggested that PbO is a main glass former in the high-PbO-content region. Based on the results obtained, we propose structural models of lead borate glasses.     

Development of compact CW-IR laser deposition system for high-throughput growth of organic single crystals

We developed a compact continuous-wave infrared (CW-IR) laser deposition system for the high-throughput growth of organic single crystals. In this system, two CW-IR lasers are used for the sample heating and thermal evaporation of materials. The CW-IR laser heating is simple and allows good control of the deposition rate and growth temperature, in response to the on/off laser switching. Six samples can be loaded simultaneously in a chamber, which allows one-by-one sequential deposition for high-throughput experiments, without breaking the vacuum. Using this setup, we studied the effect of ionic liquids on the growth of C₆₀ crystals in vacuum.     

Study of amount of evaporation residue in extracts from plastic kitchen utensils into four food-simulating solvents

The amount of evaporation residue was investigated as an index of total amount of non-volatile substances that migrated from plastic kitchen utensils into four food-simulating solvents (water, 4% acetic acid, 20% ethanol and heptane). The samples were 71 products made of 12 types of plastics for food contact use. The amount was determined in accordance with the Japanese testing method. The quantitation limit was 5 μg/mL. In the cases of polyethylene, polypropylene, polystyrene, acrylonitrile styrene resin, acrylonitrile butadiene styrene resin, polyvinyl chloride, polyvinylidene chloride, polymethylpentene, polymethylmethacrylate and polyethylene terephthalate samples, the amount was highest for heptane and very low for the other solvents. On the other hand, in the cases of melamine resin and polyamide samples, the amount was highest for 4% acetic acid or 20% ethanol and lowest for heptane. These results enabled the selection of the most suitable solvent, and the rapid and efficient determination of evaporation residue.     

Influence of Er:YAG laser frequency on dentin caries removal capacity

The purposes of this study were to evaluate in vitro the influence of different frequencies of Er:YAG laser on the human dentin caries removal capacity. Thirty fragments obtained from third molars were randomly assigned into three groups (n = 10) according to the laser frequency used: 4, 6, and 10 Hz. The caries lesion (±1 mm deep) was induced before the irradiation by S.mutans cultures for 6 weeks. The specimens of all groups were irradiated with 200 mJ of energy in noncontact and focused mode under constant refrigeration (water flow: 2.5 mL/min). Quantitative analysis of the caries removal was performed by DIAGNOdent^TM and the Axion Vision^TM software. Qualitative analysis was performed by Scanning electron microscope (SEM) and light microscope (LM). Data were analyzed by ANOVA and Fishers' tests. The DIAGNOdent^TM revealed that the caries removal was similar with 4 and 6 Hz and was superior with 10 Hz (P < 0.05). The analysis with Axion Vision^TM software revealed that the caries removal was similar with 6 and 10 Hz and the 4 Hz group promoted the lowest caries removal. Through SEM morphologic analysis, some specimens irradiated with 4 Hz presented, under the demineralized dentin, a disorganized collagenous matrix. The LM images revealed that all frequencies used promoted irregular caries removal, being observed over preparations with 6 and 10 Hz. It can be concluded that the increase of Er:YAG laser frequency provided a higher dentin caries removal without selectivity to the disorganized dentin. Microsc. Res. Tech., 2010. © 2010 Wiley‐Liss, Inc.     

Interleukin-6 in quarter milk as a further prediction marker for bovine subclinical mastitis

Subclinical mastitis (SM) is a major concern in the dairy industry because it causes economic losses and can lead to clinical mastitis. The mechanisms of the onset and progression of SM are not fully understood, and a new procedure for the detection and appropriate prediction of SM leading to clinical mastitis is necessary for dairy cow management. Inflammatory cytokines such as interleukin (IL)-6 are known to be present in inflamed mammary glands at the onset of mastitis, and IL-6 concentrations correlate with the levels of inflammation. In this study, the detection of IL-6 was examined for the evaluation for the future prediction of SM in 77 quarter milk samples from 20 cows. IL-6 concentrations in quarter milk were measured by sandwich ELISA, and the data were compared with milk somatic cell count (SCC) levels to diagnose SM. Average IL-6 concentration was significantly higher in SM quarter milk (207·0 ± 441·6 pg/ml) than in healthy control quarter milk (12·6 ± 33·4 pg/ml, P<0·01). Results of the cross-tabulation table show that SM prediction accuracy based on IL-6 concentration was almost equal or superior to SM prediction accuracy based on SCC. The detection of IL-6 in milk indicated SM earlier than did the detection of elevated SCC. Thus, the detection of IL-6 in milk could be a future prediction marker for SM.