Dehalogenation of polybrominated diphenyl ethers and polychlorinated biphenyl by bimetallic, impregnated, and nanoscale zerovalent iron

Nanoscale zerovalent iron particles (nZVI), bimetallic nanoparticles (nZVI/Pd), and nZVI/Pd impregnated activated carbon (nZVI/Pd-AC) composite particles were synthesized and investigated for their effectiveness to remove polybrominated diphenyl ethers (PBDEs) and/or polychlorinated biphenyls (PCBs). Palladization of nZVI promoted the dehalogenation kinetics for mono- to tri-BDEs and 2,3,4-trichlorobiphenyl (PCB 21). Compared to nZVI, the iron-normalized rate constants for nZVI/Pd were about 2-, 3-, and 4-orders of magnitude greater for tri-, di-, and mono-BDEs, respectively, with diphenyl ether as a main reaction product. The reaction kinetics and pathways suggest an H-atom transfer mechanism. The reaction pathways with nZVI/Pd favor preferential removal of para-halogens on PBDEs and PCBs. X-ray fluorescence mapping of nZVI/Pd-AC showed that Pd mainly deposits on the outer part of particles, while Fe was present throughout the activated carbon particles. While BDE 21 was sorbed onto activated carbon composites quickly, debromination was slower compared to reaction with freely dispersed nZVI/Pd. Our XPS and chemical data suggest about 7% of the total iron within the activated carbon was zerovalent, which shows the difficulty with in-situ synthesis of a significant fraction of zerovalent iron in the microporous material. Related factors that likely hinder the reaction with nZVI/Pd-AC are the heterogeneous distribution of nZVI and Pd on activated carbon and/or immobilization of hydrophobic organic contaminants at the adsorption sites thereby inhibiting contact with nZVI.     

Simulation of migration from a multi-layer laminated film intended for retort foods

Migration from multi-layer laminated film pouches intended for retort foods was investigated through HPLC analysis with a fluorescence detector, and measurements of residue on evaporation, consumption of potassium permanganate and total organic carbon. HPLC analysis revealed that the levels of migrants in oil and the water which were heated in the pouches (121 degrees C, 30 min) were ten times of those in the corresponding official simulants under the official conditions; n-heptane (25 degrees C, 60 min), and water (95 degrees C, 30 min). Bisphenol A diglycidyl ether and related compounds were found in the oil and the water heated in the pouches, as well as in the simulants. These compounds were thought to have been present in the adhesive between the laminated films, and migrated through the food-contact film of the package. Consumption of potassium permanganate and residue on evaporation of the heated water were ten times of those of the water simulant, while the total organic carbon level of the heated water was several-hold greater than that of the water simulant. In addition, migrant levels per surface area of the pouch were one-fourth of the concentrations per content volume of the pouch. Since compliance with the legal limits is evaluated based on the concentration per surface area, real migration into foods would be underestimated by a factor of another four.     

Fracture and deformation properties of Ni-Fe superalloy in cryogenic high magnetic field environments

The present paper includes experimental and analytical data on the fracture properties of a nickel-iron superalloy, a ferromagnetic austenite, at 4 K in magnetic fields of 0 and 6 T. The tensile, notch tensile and small punch tests are employed. A finite element analysis is also performed to convert the experimentally measured load-displacement data into useful engineering information. To interpret the results we review the available theory of the influence of magnetic field on the stress intensity factor for a crack in ferromagnetic materials.     

Visual adjustments to temporal blur

After observers have adapted to an edge that is spatially blurred or sharpened, a focused edge appears too sharp or blurred, respectively. These adjustments to blur may play an important role in calibrating spatial sensitivity. We examined whether similar adjustments influence the perception of temporal edges, by measuring the appearance of a step change in the luminance of a uniform field after adapting to blurred or sharpened transitions. Stimuli were square-wave alternations (at 1 to 8 Hz) filtered by changing the slope of the amplitude spectrum. A two-alternative-forced-choice task was used to adjust the slope until it appeared as a step change, or until it matched the perceived transitions in a reference stimulus. Observers could accurately set the waveform to a square wave, but only at the slower alternation rates. However, these settings were strongly biased by prior adaptation to filtered stimuli, or when the stimuli were viewed within temporally filtered surrounds. Control experiments suggest that the latter induction effects result directly from the temporal blur and are not simply a consequence of brightness induction in the fields. These results suggest that adaptation and induction adjust visual coding so that images are focused not only in space but also in time.     

Contrasting diurnal variations in fossil and nonfossil secondary organic aerosol in urban outflow, Japan

Diurnal variations of fossil secondary organic carbon (SOC) and nonfossil SOC were determined for the first time using a combination of several carbonaceous aerosol measurement techniques, including radiocarbon (1?C) determinations by accelerator mass spectrometry, and a receptor model (chemical mass balance, CMB) at a site downwind of Tokyo during the summer of 2007. Fossil SOC showed distinct diurnal variation with a maximum during daytime, whereas diurnal variation of nonfossil SOC was relatively small. This behavior was reproduced by a chemical transport model (CTM). However, the CTM underestimated the concentration of anthropogenic secondary organic aerosol (ASOA) by a factor of 4-7, suggesting that ASOA enhancement during daytime is not explained by production from volatile organic compounds that are traditionally considered major ASOA precursors. This result suggests that unidentified semivolatile organic compounds or multiphase chemistry may contribute largely to ASOA production. As our knowledge of production pathways of secondary organic aerosol (SOA) is still limited, diurnal variations of fossil and nonfossil SOC in our estimate give an important experimental constraint for future development of SOA models.     

Combination of cytomegalovirus enhancer with human cellular promoters for gene-induced chondrogenesis of human bone marrow mesenchymal stem cells

High-expression plasmid vectors for human mesenchymal stem cells (MSCs) were constructed by combination of cytomegalovirus immediate-early enhancer with cellular promoters. MSCs transfected with the vector showed higher transgene production of a cytokine, which increased the differentiation level to chondrocytes.     

Purification and molecular cloning of an intracellular 3-hydroxybutyrate-oligomer hydrolase from Paucimonas lemoignei

An intracellular 3-hydroxybutyrate-oligomer hydrolase was purified from a poly(3-hydroxybutyrate)-degrading bacterium, Paucimonas lemoignei. It hydrolyzed the 3-hydroxybutyrate dimer with the highest specific activity of any of the enzymes reported so far. The gene was cloned and sequenced. The deduced amino acid sequence showed that the enzyme is a homolog of the PhaZc of Ralstonia eutropha H16.