Corrosion in alkanolamine used for acid gas removal: From natural gas processing to CO2 capture

The aim of this paper is to review some of the parameters influencing the corrosivity of alkanolamine solvents used for natural gas purification or for CO₂ capture. In the light of literature data and of new experimental results, the influences of temperature and of acid gas loading are discussed. These two parameters appear to have a strong impact on corrosion rates of carbon steel, with extrapolated corrosion rates of several tens of mm/year for the highest temperature and acid gas loading condition. It is then proposed to discuss about similarities and differences between natural gas processing and CO₂ capture from flue gas. For both applications, alkanolamine processes are used. Still, differences can be found in operating parameters. The most significant gap concerns the lean amine sections. In acid gas treatment, the regeneration of the solvent is often performed down to zero loading. Under these conditions, an extremely low corrosivity of the lean solvent is expected. On the contrary, CO₂ capture from flue gas requires only a partial stripping of the CO₂ in the regeneration section, due to energy efficiency reasons. Then, the lean solvent still contains some acid gas, and subsequently a higher corrosivity. Finally, the general principles for material selection for the different parts of acid gas removal units are discussed, considering both cases of natural gas processing or CO₂ capture.     

The Yin and Yang of VEGF and PEDF: Multifaceted Neurotrophic Factors and Their Potential in the Treatment of Parkinson's Disease

Over the last few decades, vascular endothelial growth factor (VEGF) and pigment epithelium-derived factor (PEDF) have emerged as multifaceted players in not only the pathogenesis, but potential treatment, of numerous diseases. They activate diverse intracellular signaling cascades known to have extensive crosstalk, and have been best studied for their effects in cardiology and cancer biology. Recent work with the two factors indicates that the activity of one growth factor is often directly related to the action of the other. Their respective neuroprotective effects, in particular, raise important questions regarding the treatment of neurodegenerative disorders, including Parkinson's disease.     

Analysis of chill-cast NiAl intermetallic compound with copper additions

This study carried out a characterization of chill-cast NiAl alloys with copper additions, which were added to NiAl, such that the resulting alloy composition occurred in the β-field of the ternary NiAlCu phase diagram. The alloys were vacuum induction melted and casted in copper chill molds to produce ingots 0.002 m thick, 0.020 m wide, and 0.050 m long. X-ray diffractometry (XRD) and transmission electron microscopy (TEM) performed in chill-cast ingots identified mainly the presence of the β-(Ni,Cu)Al phase. As-cast ingots showed essentially no ductility at room temperature except for the Ni₅₀Al₄₀Cu₁₀ alloy, which showed 1.79% of elongation at room temperature. Ingots with this alloy composition were then heat treated under a high-purity argon atmosphere at 550 °C (24 h) and cooled either in the furnace or in air, until room temperature was reached. β-(Ni,Cu)Al and γ′(Ni,Cu)₃Al were present in specimens cooled in the furnace and β-(Ni,Cu)Al, γ′(Ni,Cu)₃Al plus martensite-(Ni,Cu)Al were present in specimens cooled in air. Thermogravimetric analysis indicated that martensite transformation was the result of a solid-state reaction with M _s ∼ 470 and M _f ∼ 430 °C. Tensile tests performed on bulk heat-treated ingots showed room-temperature ductility between 3 and 6%, depending on the cooling media.     

Influence of the co-firing on the leaching of trace pollutants from coal fly ash

The (co)-firing of low-cost alternative fuels is expected to increase in the forthcoming years in the EU because of the economic and environmental benefits provided by this technology. This study deals with the impact of the different coal/waste fuel ratio of the feed blend on the mineralogy, the chemical composition and especially on the leaching properties of fly ash. Different blends of coal, petroleum coke, sewage sludge, wood pellets, coal tailings and other minor biomass fuels were tested in PCC (pulverised coal combustion) and FBC (fluidized bed combustion) power plants. The co-firing of the studied blends did not drastically modify the mineralogy, bulk composition or the overall leaching of the fly ash obtained. This suggests that the co-firing process using the alternative fuels studied does not entail significant limitations in the re-use or management strategies of fly ash.     

Activity and selectivity of a {\text{Pd/}}\gamma {\text{ - Al}}_{\text{2}} {\text{O}}_{\text{3}} catalytic membrane in the partial hydrogenation reactions of acetylene and 1,3-butadiene

A ${\text{Pd/}}\gamma {\text{ - Al}}_{\text{2}} {\text{O}}_{\text{3}}$ membrane supported on a macroporous $\alpha {\text{ - Al}}_{\text{2}} {\text{O}}_{\text{3}}$ tube was prepared by sol–gel processing and used in the partial hydrogenation of acetylene and 1,3-butadiene. The average pore diameter of the ${\text{Pd/}}\gamma {\text{ - Al}}_{\text{2}} {\text{O}}_{\text{3}}$ membrane was 3.6 nm. The gases were separated by Knudsen diffusion. The activity and selectivity of the ${\text{Pd/}}\gamma {\text{ - Al}}_{\text{2}} {\text{O}}_{\text{3}}$ membrane was compared to that of ${\text{Pd/}}\gamma {\text{ - Al}}_{\text{2}} {\text{O}}_{\text{3}}$ catalysts used in a conventional packed bed reactor. The highest selectivity to the partially hydrogenated products occurred when the reactant was premixed with H₂ and was passed through the membrane wall.     

Peracetic acid‐enhanced photocatalytic and sonophotocatalytic inactivation of E. coli in aqueous suspensions

BACKGROUND: Although chlorination is an effective and widely employed method of water disinfection, it suffers serious drawbacks such as the formation of toxic chlorinated by‐products. Therefore, other disinfection technologies have been researched and developed, including advanced oxidation. RESULTS: The efficacy of heterogeneous photocatalysis and sonophotocatalysis induced by UV‐A irradiation and low frequency (24–80 kHz) ultrasound irradiation in the presence of TiO₂ as the photocatalyst and peracetic acid (PAA) as an additional disinfectant to inactivate E. coli in sterile water was evaluated. PAA‐assisted UV‐A/TiO₂ photocatalysis generally leads to nearly complete E. coli inactivation in 10–20 min of contact time with the extent of inactivation depending on the photocatalyst type and loading (in the range 100–500 mg L^?1) and PAA concentration (in the range 0.5–2 mg L^?1). The simultaneous application of ultrasound and UV‐A irradiation in the presence of TiO₂ and PAA prompted further E. coli inactivation. CONCLUSIONS: The proposed advanced disinfection technology offers complete E. coli inactivation at short treatment times and low PAA doses. Copyright © 2010 Society of Chemical Industry     

Extracellular Vesicles in the Fungi Kingdom

Extracellular vesicles (EVs) are membranous, rounded vesicles released by prokaryotic and eukaryotic cells in their normal and pathophysiological states. These vesicles form a network of intercellular communication as they can transfer cell- and function-specific information (lipids, proteins and nucleic acids) to different cells and thus alter their function. Fungi are not an exception; they also release EVs to the extracellular space. The vesicles can also be retained in the periplasm as periplasmic vesicles (PVs) and the cell wall. Such fungal vesicles play various specific roles in the lives of these organisms. They are involved in creating wall architecture and maintaining its integrity, supporting cell isolation and defence against the environment. In the case of pathogenic strains, they might take part in the interactions with the host and affect the infection outcomes. The economic importance of fungi in manufacturing high-quality nutritional and pharmaceutical products and in remediation is considerable. The analysis of fungal EVs opens new horizons for diagnosing fungal infections and developing vaccines against mycoses and novel applications of nanotherapy and sensors in industrial processes.     

来点实的

看着越来越多的品牌推出与奥运相关的产品,谁想让产品说话？谁能让产品说话？问别人,更是在问自己。     

Selection of phytate-degrading human bifidobacteria and application in whole wheat dough fermentation

Lately, whole wheat products are highly recommended from their healthy properties. However, the presence of phytic acid (InsP(6)) could partly limit their benefits because it decreases the mineral bioavailability due to its chelating properties. The objective of this work was to select strains with high phytate-degrading activity from human feces, and evaluate their suitability for the bread making process. Twenty-three different bifidobacterial strains (13 from infants and 10 from adults) were isolated, belonging to the species Bifidobacterium longum, Bifidobacterium breve and Bifidobacterium catenulatum. The phosphatase and phytase activities of these strains were evaluated as well as their ability to degrade InsP(6) during growth. Then, the fermentative ability of the strain showing the highest phytate-degrading activity (B. longum. BIF307) was determined in whole wheat breadmaking. The use of the selected bifidobacterial strain as starter during whole wheat fermentation resulted in bread with similar technological quality than the control (in absence of bifidobacteria) and crumb with lower levels of inositol phosphates. Therefore, the used of the selected Bifidobacterium strain in whole wheat breadmaking process could provide potential nutritional benefits by decreasing the antinutrient content of the product.