Micromorphological characterization of zinc/silver particle composite coatings

The aim of this study was to evaluate the three‐dimensional (3D) surface micromorphology of zinc/silver particles (Zn/AgPs) composite coatings with antibacterial activity prepared using an electrodeposition technique. These 3D nanostructures were investigated over square areas of 5 μm × 5 μm by atomic force microscopy (AFM), fractal, and wavelet analysis. The fractal analysis of 3D surface roughness revealed that (Zn/AgPs) composite coatings have fractal geometry. Triangulation method, based on the linear interpolation type, applied for AFM data was employed in order to characterise the surfaces topographically (in amplitude, spatial distribution and pattern of surface characteristics). The surface fractal dimension D_f, as well as height values distribution have been determined for the 3D nanostructure surfaces. Microsc. Res. Tech. 78:1082–1089, 2015. © 2015 The Authors published by Wiley Periodicals, Inc.     

Palladium Nanoparticles in Water: A Reusable Catalytic System for the Cycloetherification or Benzannulation of α‐Allenols

A convenient ligand‐free catalytic system has been developed for the chemoselective cyclization reaction of various α‐allenol derivatives by palladium nanoparticles (PdNPs) in an aqueous reaction medium.

     

Role of predation by zooplankton in transport and fate of protozoan (oo)cysts in granular activated carbon filtration

The significance of zooplankton in the transport and fate of pathogenic organisms in drinking water is poorly understood, although many hints of the role of predation in the persistence of microorganisms through water treatment processes can be found in literature. The objective of this study was to assess the impact of predation by natural zooplankton on the transport and fate of protozoan (oo)cysts in granular activated carbon (GAC) filtration process. UV-irradiated unlabelled Cryptosporidium parvum and Giardia lamblia (oo)cysts were seeded into two pilot-scale GAC filtration columns operated under full-scale conditions. In a two-week period after seeding, a reduction of free (oo)cysts retained in the filter bed was observed. Zooplankton was isolated from the filter bed and effluent water on a 30 μm net before and during the two-week period after seeding; it was enumerated and identified. Rotifers, which are potential predators of (oo)cysts, accounted for the major part of the isolated zooplankton. Analytical methods were developed to detect (oo)cysts internalized in natural zooplankton isolated from the filter bed and effluent water. Sample sonication was optimized to disrupt zooplankton organisms and release internalized microorganisms. (Oo)cysts released from zooplankton after sonication were isolated by IMS and stained (EasyStain™) for microscopic counting. Both Cryptosporidium and Giardia (oo)cysts were detected in association with zooplankton in the filter bed samples as well as in the effluent of GAC filters. The results of this study suggest that predation by zooplankton can play a role in the remobilization of persistent pathogens such as Cryptosporidium and Giardia (oo)cysts retained in GAC filter beds, and consequently in the transmission of these pathogens in drinking water.     

Pile burning of cutting debris in stands of hazel (Corylus avellana): An experimental study of smouldering combustion towards the validation of a burning protocol

Smouldering combustion in burning piles was experimentally investigated by studying temperature changes in six piles of 2 m of diameter of cutting debris of hazel (Corylus avellana) for three days after extinction. The piles were monitored using an IR camera and K-type thermocouples. The experiment was designed in order to study how the maximum temperature of the charcoal might be influenced by the individual and interaction effects of both the quality of extinction and the elapsed time until the start of extinction of the piles. The piles that were properly extinguished (i.e. using a high-pressure, homogeneously distributed water flow of 50 l/min for 4 min) had a uniform temperature profile and did not have significant hot spots. The temperature reached equilibrium with the environment in less than 10 h after extinction. In contrast, a smouldering front moved throughout the poorly extinguished piles, which had a wide temperature distribution and hot spots of up to 700 °C. A simulation of windy conditions after three days of experiments on a poorly extinguished pile showed that the reactivation of charcoal combustion was possible. It gave a high-risk scenario to cause a wildfire, with hot smouldering embers being transported by wind flow. The results are of interest to improve pile burning protocols so that the number of wildfires caused by such practices may be reduced.     

Degradation kinetics of epoxidized soybean oil composites filled with sisal fiber

Epoxidized soybean oil (ESO) composites were cured with methyl tetrahydrophthalic anhydride (MTHPA) and 2,4,6-tris(dimethylaminomethyl)phenol (DEH 35) as a catalyst, sisal fibers were added at 10% and 30% of percent per weight. Composites curing was monitored using Fourier transform infrared spectroscopy, whereas the thermal stability and the degradation kinetics were investigated using thermogravimetry (TG). ESO/MTHPA/DEH35/S10 and ESO/MTHPA/DEH35/S30 composites displayed curing temperatures approximately 100°C lower related to ESO/MTHPA/DEH35, as well as higher degree of conversion. Sisal addition improved the thermal stability, shifting the weight loss shifting the weight loss onset to higher temperature (from 82 to 120°C). Thermal degradation energy $$ was determined using Friedman, Kissinger-Akahira-Sunose and Ozawa-Flynn-Wall models. Sisal significantly increased $$, especially in the intermediate phase (α = 0.2 and 0.8). The degradation kinetics was investigated by TG, and the degradation mechanisms modeled using Kamal-Sourour, Sestack-Berggren, and 1st order (F1), showed excellent fit, with R² > 0.99. Acquired results demonstrate that sisal fiber addition benefited the curing process and increased the thermal stability of ESO composites.     

Antimicrobial activity of nisin against Oenococcus oeni and other wine bacteria

Nisin is a bacteriocin used against food spoilage bacteria. Sulphur dioxide is a potent antioxidant as well as an antimicrobial agent widely used in the wine industry. In this study we describe the effect of these important antibacterial agents on the growth of a collection of 64 lactic acid bacteria (23 Oenococcus, 29 Lactobacillus, 3 Leuconostoc and 9 Pediococcus), 23 acetic acid bacteria and 20 yeast isolates, most of them recovered from wine. Minimal inhibitory concentrations (MIC) and minimal bactericide concentrations of nisin, potassium metabisulphite and ethanol were determined. Nisin MIC(50) values for the tested isolates were as follows: 0.024, 12.5, 200 and > or micro for oenococci, lactobacilli-pediococci-leuconostoc, acetic acid bacteria and yeasts, respectively. Synergistic effects on bacterial growth inhibition were observed, and potassium metabisulphite MIC(50) values decreased from one to three orders of dilution when it was combined with subinhibitory concentrations of nisin in the growth media. This effect was observed in all lactic acid bacteria species of our study. Significant differences in nisin sensitivity were observed between Gram-positive and Gram-negative bacteria, and between Oenococcus oeni and other species of lactic acid bacteria. It is concluded that appropriate combinations of nisin and metabisulphite could control the growth of spoilage bacteria in wine and therefore allow a decrease in the levels of sulphur dioxide currently used by the wine industry.     

Kinetic study of the effects of extracts from Vicia faba var. equina on intestinal sugar absorption

Alcoholic and water extracts from seed-coats of Vicia faba var. equina were prepared and their effects on in-vivo intestinal sugar absorption across the rat small intestine were investigated. Both extracts significantly (P<0.001) inhibited sugar absorption. The higher and more stable inhibition was induced by the water extract. Pretreatment of the extracts with polyamide significantly (P<0.001) reduced their inhibitory potency but did not abolish it, suggesting the presence in the extracts of some other intestinal sugar absorption inhibitor, different from polyphenols. Although both extracts inhibited intestinal sugar active transport, only the water extract was able to reduce sugar diffusion across the small intestine. These differences in behaviour seem to be related to the polyphenolic content of each extract.     

Validation of a rapid milk fat separation method to determine the fatty acid profile by gas chromatography

An improved rapid method for separating lipids from milk to determine the fatty acid composition using 2 centrifugations at room temperature (20°C) was compared with the ISO-IDF reference procedure based on solvent extraction. The new method is useful for research and routine quality control and has a number of advantages over the reference procedure—mainly no solvents are required and it saves time. Applicability of the rapid separation method was confirmed in fats with different physical characteristics from ewe and goat milk samples. Minor differences were found in the proportions of some fatty acids in the reference and centrifugation methods. Milk fat separated by centrifugation at room temperature did not differ in fatty acid composition from milk centrifuged at 4°C.     

Regulation of memory accuracy with multiple answers: The plurality option.

We report two experiments that investigated the regulation of memory accuracy with a new regulatory mechanism: the plurality option. This mechanism is closely related to the grain-size option but involves control over the number of alternatives contained in an answer rather than the quantitative boundaries of a single answer. Participants were presented with a slideshow depicting a robbery (Experiment 1) or a murder (Experiment 2), and their memory was tested with five-alternative multiple-choice questions. For each question, participants were asked to generate two answers: a single answer consisting of one alternative and a plural answer consisting of the single answer and two other alternatives. Each answer was rated for confidence (Experiment 1) or for the likelihood of being correct (Experiment 2), and one of the answers was selected for reporting. Results showed that participants used the plurality option to regulate accuracy, selecting single answers when their accuracy and confidence were high, but opting for plural answers when they were low. Although accuracy was higher for selected plural than for selected single answers, the opposite pattern was evident for confidence or likelihood ratings. This dissociation between confidence and accuracy for selected answers was the result of marked overconfidence in single answers coupled with underconfidence in plural answers. We hypothesize that these results can be attributed to overly dichotomous metacognitive beliefs about personal knowledge states that cause subjective confidence to be extreme. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Recovering of forest biomass from Spanish hybrid poplar plantations

Residues recovering from traditional poplar plantations for timber production are a potential relevant biomass source in Spain and other temperate countries. Three different residual biomass harvesting systems have been work-studied in order to characterize the work methods and analyze their productivity and cost. Two were oriented to branches, top and/or energy wood collection, chipping and transport using different work methods, while the other one consisted of after-logging stumps removal and shredding. Different sized and powered chippers worked in the two first cases, besides different farm tractors with trailers for off-road chips transport. Also the trucks and the loading machines were different. In the third site, a backhoe excavator removed the stumps, and a bucket loader collected them to be grinded by a shredding machine. Productivity and cost have been analyzed using IUFRO standards, providing average figures and, when possible, predictive productivity equations. Most capital-intensive equipment option has shown to be most productive, but less investment requiring system is cheaper and may be most interesting for some enterprise and plantation sizes. In addition, logistics of biomass and timber supply has been analyzed, and some indications about equipment sizing, machine annual production and relocation costs related to supply area and average plantation size are provided.