共面波导(CPW)馈电单极子天线的设计与研究

给出一种工作于900MHz的共面波导(CPW)馈电单极子天线的设计。该单极子天线以共面波导的中心导带为辐射单极子，以中心导带两边的金属导体作反射板，结构简单紧凑。但是由于天线与共面波导之间缺少有效的隔离，造成天线性能受共面波导尺寸的影响较严重。本文通过模拟计算和实验测量详细分析了共面波导尺寸的变化对天线性能的影响，给出了结合共面波导尺寸设计的工作在900MHz的单极子天线结构数据。     

Performance of Indoor Infrared Wireless CDMA Systems with Angle Diversity

Indoor infrared communication systems is one of the possible ways of offering data rates in excess of 100 Mbit/s without the need for wiring. Multiple users can share an infrared channel by code division-multiple access (CDMA) techniques. However, the CDMA system performance is limited by both background noise and co-channel interference. In this paper we study the use of angle diversity for mitigating the effects of the noise and interference. The system considered uses on-off shift keying modulation with multibeam transmitters and imaging receivers. The overall system performance for different diversity combining techniques is evaluated and compared to a system without diversity. Numerical results for a 2-user CDMA system indicate that signal to noise and interference ratio (SNIR) improvement (over systems with no diversity) of 5 dB is obtained for at least 50% of an ensemble of 10000 sample evaluations. The generalized selection combining (GSC)--a new diversity technique yet to be implemented for infrared systems--offers the best performance even with its reduced complexity.     

分布式光纤拉曼放大器的增益平坦设计

介绍了在波分复用（WDM）系统中分布式光纤拉曼放大器（FRA）的理论分析模型。在此基础上，对增益平坦设计所需考虑的因素进行了分析；最后通过试验证明了它的有效性。     

电荷耦合器件积分时间对微型成像系统成像质量的影响

在光圈固定的情况下，确定合适的积分时间对于提高微型电荷耦合器件(CCD)成像系统的成像质量，增强微型飞行器的侦察能力具有十分重要的意义。本文讨论了决定CCD积分时间的各种因素，重点研究了适用于微型飞行器的CCD成像系统的积分时间与像移的关系，并进一步推导了计算像移量的相关数学模型。利用该模型对不同积分时间内采集的运动图像进行了像质评价，结果表明，在保证曝光量的前提下，当像移量被限制在1个像素内时，可以获得相对理想的运动图像像质。     

基于MATLAB的风能自校正自调整PID模糊控制器仿真研究

为了提高风力发电系统综合系统性能,在传统风力发电技术的基础上,对变速风力发电机组的自校正自调整PID模糊控制进行了详细的分析和研究,从而利用模糊控制和PID控制相结合的技术,取得了很好的效果。从MATLAB仿真结果看出系统精度及效率很高而稳态误差较小,鲁棒性较好。     

基于AFM的微结构加工实验研究

本文建立了微动工作台和原子力显微镜相结合的微加工系统，在该系统上采用金刚石针尖进行微加工实验，与SPI系统本身的刻划软件刻划出的图形进行了比较分析，得出这个系统适合微结构的加工；并给出了采用该方法加工的1111面及多边形面微结构；还分析了金刚石针尖几何角度及SPM和工作台的相关参数对加工的影响。     

Study on the Complexity of the Bullwhip Effect

Recent years have witnessed a rapid growth of interest in the study of the dynamic behavior of replenishment rules of bullwhip effect. We prove that bullwhip effect and butterfly effect share a same the self-oscillation amplifying mechanism that is the ordering decisions the supplier self-oscillation amplify the perturbations brought by the errors in the processing of retailers' demand information. This results as an explicit self-similar structure of the sensitivity of the system to the initial values duty to the nonlinear mechanism. In this paper, the causes process of the bullwhip effect is described as the internal nonlinear mechanism and study on the complexity of bullwhip effect for order-up-to policy under demand signal processing. The methodology is based on fractal and chaotic theory and allows important insights to be gained about the complexity behavior of bullwhip effect.     

Measurement and numerical simulation of three‐dimensional fiber orientation states in injection‐molded short‐fiber‐reinforced plastics

To determine three‐dimensional fiber orientation states in injection‐molded short‐fiber composites, a confocal laser scanning microscope (CLSM) is used. Since the CLSM optically sections the specimen, more than two images of the cross sections on and below the surface of the composite can be obtained. Three‐dimensional fiber orientation states can be determined by using geometric parameters of fiber images obtained from two parallel cross sections. For experiments, carbon‐fiber‐reinforced polystyrene is examined by the CLSM and geometric parameters of fibers on each cross‐sectional plane are measured by an image analysis. In order to describe fiber orientation states compactly, orientation tensors are determined at different positions of the prepared specimen. Three‐dimensional orientation states are obtained without any difficulty by determining the out‐of‐plane angles utilizing fiber images on two parallel planes acquired by the CLSM. Orientation states are different at different positions and show the shell–core structure along the thickness of the specimen. Fiber orientation tensors are predicted by a numerical analysis and the numerically predicted orientation states show good agreement with measured ones. However, some differences are found at the end of cavity. They may result from the fountain flow effects, which are not considered in the numerical analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 500–509, 2003     

二氧化锡溅射工艺研究

SnO2 是最早使用也是目前使用最广泛的一种气敏材料 ,使用该材料设计制作的气敏传感器具有许多优点。在简要介绍溅射镀膜的成膜过程和特点的基础上 ,着重介绍了SnO2 膜的制备流程 ,分析了功率和温度变化对成膜质量的影响     

火工品压药机装配误差的研究

针对军用雷管生产线中压药机结构,分别用极值法和概率法对压药机冲子和雷管的配合精度,进行了装配尺寸链的描述和计算,并对所得的结果进行了比较。