GL—2型Φ600mm螺旋选别攀枝花钛铁矿生产实践

攀矿选钛厂设计采用传统的螺旋选矿设备ＦＬＸ一１型φ６００ｍｍ螺旋选矿机和φ１２００ｍｍ螺旋溜槽，从选矿（铁）厂磁选尾矿物料中回收原生粒状钛铁矿积累了多年生产实践经验。而广东有色金属研究院研制的ＧＬ一２型φ６００ｍｍ螺旋选矿机具有处理能力大、分选效率高、选别粒级宽、不需冲洗水及占地面积小等特点，有取代选钛厂目前使用的螺旋选矿设备之趋势。     

瞬态气体温度传感器研究

本文介绍了作者研制的瞬态气体温度传感器.针对传感器敏感元件的结构设计，应用等效物理模型，对影响温度测试精度和动态响应的结构参数以及使用方法进行了计算分析.研制出的温度传感器经激波管动态标定，证明其具有百微秒级的动态响应.本文最后介绍了在倒拖工况下，柴油机缸内瞬态气体温度的测试结果．     

6M32(51)氮氢气压缩机系统的技术改造

1 机组简介 6M32(51)-190/320-BX型氮氢气压缩机的基础件采用德国博尔格公司的专有技术,具体参数如下: 压缩介质:氮氢气,压缩级数:6级;转速:375rpm;行程:320mm,轴功率:2920kW,容积流量:190m~3/min;气量调节:回路调节,冷却填料润滑油:1.95 kg/h;重量:主机69.45t,     

Comparisons of PWM and one-cycle control for power amplifier with multilevel converter

Based on the concepts of cascade multilevel converters and one-cycle technique, comparisons are conducted to characterize the distortion of the pulsewidth modulation (PWM) and one-cycle control methods that were applied to converters. Simulation results for the different control schemes are obtained in PSIM software initially to see the effect of one-cycle control different from that of PWM control. Through the comparisons, the advantages and disadvantages are identified for each method. The one-cycle scheme is better than PWM control in reducing undesirable harmonics and tracing dynamic waveforms. Simulation and experimental results are also provided to verify the conclusions.     

移动互联网和它的增值业务

概述 通信发展的几个必然趋势 理想通信的目的:任何时间;任何地方;任何空间能随机地找到任何人,传送任何信息,全球一个网.     

GENERATION OF NONLINEAR INTERNAL WAVES ON CONTINENTAL SHELF

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｔｅｒｎａｌｔｉｄａｌｉｎｔｅｒａｃｔｉｏｎｗｉｔｈｂｏｔｔｏｍｆｅａｔｕｒｅｓａｐｐｅａｒｓｔｏｂｅｔｈｅｄｏｍｉｎａｎｔｍｅｃｈａｎｉｓｍｆｏｒｇｅｎｅｒａ ｔｉｏｎｏｆｔｈｅｃｏｈｅｒｅｎｔｏｃｅａｎｉｃｉｎｔｅｒｎａｌｗａｖｅｓｔｈａｔａｒｅｏｂｓｅｒｖａｂｌｅｗｉｔｈＳＡＲ ,ｃｌｏｓｅｒｔｏｓｈｏｒｅ ,ｒｉｖｅｒｉｎｅｏｒｇｌａｃｉａｌｉｎｔｒｕｓｉｏｎａｎｄｃｏｎｔｉｎｅｎｔａｌｂｒｅａｋｐｒｏｖｉｄｅｓｅｃ ｏｎｄａｒｙｇｅｎｅｒａｔｉｎｇｍｅｃｈａ…     

新型哈氏合金G—30的耐蚀性能与工业应用

文章叙述了新型镍基耐蚀哈氏合金G-30在不同介质中的耐蚀性能以及工业应用,综合分析了该合金应用的经济性及前景。     

An implementation of the vectorial finite element analysis ofanisotropic waveguides through a general-purpose PDE software

This paper reports on the major progress in the development of an intelligent, interactive and automated system, based on the vector finite element method, and implemented within PDE/Protran problem solving environment. The system is known as WAVEGIDE and was originally developed by the authors for an efficient solution of inhomogeneous dielectric waveguides. In this paper, it has been further extended to the solution of anisotropic waveguiding structures. With our system, through an interactive “question-and-answer” session, which requires minimal knowledge of programming, the problem can be defined using high level PDE/Protran commands. It can then be simply and quickly solved by the main processor within this intelligent environment. To verify the convergence and accuracy of the present approach, numerical results (with respect to the grid density and element order) for a rectangular metallic waveguide half filled with dielectric are given and compared with other finite element methods. Numerical results for an anisotropic dielectric rectangular waveguide are also presented. These results clearly illustrate the accuracy and the ease of use of the modified WAVEGIDE program     

硼酸使掺铁铝酸锂发光增强的现象

在硼酸存在下合成了掺铁铝酸锂荧光体,研究了在不同温度下硼酸加入量对荧光体发光强度的影响,并通过X射线粉末衍射和粒度分析,初步探讨了发光增加的原因。