Profile-Driven Component Placement for Cluster-Based Online Services

The growth of the Internet and of various intranets has spawned a wealth of online services, most of which are implemented on local-area clusters using remote invocation (for example, remote procedure call/remote method invocation) among manually placed application components. Component placement can be a significant challenge for large-scale services, particularly when application resource needs are workload dependent. Automatic component placement has the potential to maximize overall system throughput. The key idea is to construct (offline) a mapping between input workload and individual-component resource consumption. Such mappings, called component profiles, then support high-performance placement. Preliminary results on an online auction benchmark based on J2EE (Java 2 Platform, Enterprise Edition) suggest that profile-driven tools can identify placements that achieve near-optimal overall throughput.     

Monte Carlo simulation of gas phase polymerization of 1,3‐butadiene. Part II: Kinetics optimization and confirmation

Studies on the deactivations and initiations of gas phase polymerizations of 1,3‐butadiene have been achieved by Monte Carlo simulation. Initiation and deactivation control the reaction before and after the peak of the polymerization rate, respectively. The influence of polymerization temperature has been studied. Monte Carlo modeling of polymerization kinetics and mechanism was confirmed by the agreement of experimental data and simulation results of polymerizations run with a temporary evacuation of monomer. The balance of catalysts and active chains is established by both initiation and chain transfer reactions with cocatalyst, which causes a ‘pseudo‐stability’ stage. © 2003 Society of Chemical Industry     

Characteristics of low-leakage deep-trench diode for ESD protection design in 0.18-/spl mu/m SiGe BiCMOS process

This paper proposes a novel low-leakage BiCMOS deep-trench (DT) diode in a 0.18-/spl mu/m silicon germanium (SiGe) BiCMOS process. By means of the DT and an n/sup +/ buried layer in the SiGe BiCMOS process, a parasitic vertical p-n-p bipolar transistor with an open-base configuration is formed in the BiCMOS DT diode. Based on the two-dimensional (2-D) simulation and measured results, the BiCMOS DT diode indeed has the lowest substrate leakage current as compared to the conventional p/sup +//n-well diode even at high temperature conditions, which mainly results from the existence of the parasitic open-base bipolar transistor. Considering the applications of the diode string in electrostatic discharge (ESD) protection circuit designs, the BiCMOS DT diode string also provides a good ESD performance. Owing to the characteristics of the low leakage current and high ESD robustness, it is very convenient for circuit designers to use the BiCMOS DT diode string in their IC designs.     

以3D软件应用为中心的设计管理模式——PDS在配管设计中的应用

由PDS的特点入手,结合工程实践的应用情况,阐明了3D软件可以更广泛的应用于配管的设计中,强调了以3D模型为中心开展设计和管理的新模式.     

GMSK无线接收终端设计

设计了GMSK(Gauss Minimum Shift Keying，高斯最小频移键控)无线接收终端的硬件与软件系统。硬件的射频电路对空中信号进行接收与滤波，再由以MX589构成的解调模块解调，输出数字信号；数字硬件以单片机GMS97L5为核心。软件系统设计了对IC卡AT88SCl608加密卡的认证以及对串行数据的接收与处理的中断程序。终端系统接收数据快、性能稳定。     

软印刷技术

软印刷技术是基于弹性体印章/模具来转移图形结构的微纳加工技术。详细介绍了软印刷技术中转移图形结构的多种方式,并探讨软印刷技术在微纳电子学、光学、传感器、生物等领域的广泛应用。对软印刷技术的弹性体印章/模具制备、聚二甲基硅氧烷的属性、理论研究等进行了探讨。     

16信道0.35μmCMOS/VCSEL光发射模块

研究了垂直腔面发射激光器 (VCSEL)及其列阵器件的光谱特性、调制特性、高频特性及与微电子电路的兼容性 ,将 1× 16的VCSEL与CMOS专用集成电路进行多芯片组装 (MCM ) ,混合集成为 16信道VCSEL光发射功能模块 .测试过程中 ,功能模块的光电特性及其均匀性良好 ,测量的 - 3dB频带宽度大于 2GHz.     

土壤冲击特性的实验研究

本文利用分离式Hopkinson压杆研究了土体在不同应变率条件下的冲击动态力学性能，发现土体有明显的应变率效应，与静载相比，冲击荷载下土的动强度和动模量均有很大的提高。     

基于AFM的微结构加工实验研究

本文建立了微动工作台和原子力显微镜相结合的微加工系统，在该系统上采用金刚石针尖进行微加工实验，与SPI系统本身的刻划软件刻划出的图形进行了比较分析，得出这个系统适合微结构的加工；并给出了采用该方法加工的1111面及多边形面微结构；还分析了金刚石针尖几何角度及SPM和工作台的相关参数对加工的影响。     

Effects of a K+ATP channel opener, lemakalim, on systemic, coronary and regional vascular dynamics in conscious dogs: comparison with nifedipine, adenosine, nitroglycerin and acetylcholine

The systemic, coronary and regional vascular responses to the K+ATP channel opener lemakalim were compared to other potent vasodilators (i.e., nifedipine, adenosine, nitroglycerin and acetylcholine). Experiments were performed in 12 conscious dogs 2 to 4 weeks after implantation of aortic catheters and flow probes on the ascending aorta, left circumflex coronary, celiac, mesenteric, renal and iliac arteries, and solid-state miniature pressure gauges in the left ventricular cavity. Dose-response curves induced by bolus injection (i.v.) were examined. For doses that reduced total peripheral resistance by 22%, lemakalim reduced celiac (-28 +/- 2%), mesenteric (-24 +/- 3%), renal (-17 +/- 3%) and iliac (-18 +/- 3%) vascular resistances (i.e., by amounts similar to those observed with the other vasodilators, except for adenosine, which increased renal resistance). At these doses, lemakalim induced a greater decrease (-52 +/- 3%) (P < .05) in coronary resistance, as compared with nifedipine (-35 +/- 3%), adenosine (-38 +/- 3%), nitroglycerin (-25 +/- 2%) and acetylcholine (-32 +/- 3%). However, when near maximal vasodilation was elicited, adenosine elicited the greatest (P < .05) decrease in coronary resistance (-81 +/- 1%), as compared with lemakalim (-74 +/- 2%), nifedipine (-67 +/- 2%), nitroglycerin (-63 +/- 2%) and acetylcholine (-72 +/- 1%). Both the time to maximal increases in regional blood flow and the time for recovery in all vascular beds were significantly prolonged for lemakalim compared with the other vasodilators. Thus, the K+ATP channel opener lemakalim dilates the coronary bed out of proportion to other vascular beds, is relatively more potent at lower doses than other vasodilators and exhibits a delayed and more prolonged action in all regional vascular beds.