不同填料曝气生物滤池启动挂膜试验研究

不同填料曝气生物滤池在相同条件下进行挂膜试验。进水流向为上流式,挂膜方式为复合接种挂膜,即先用活性污泥闷曝接种,然后逐步提高进水流速,直到滤料表面形成稳定的生物膜。结果表明:33 d后挂膜成功,在温度为16～24℃,水力停留时间(HRT)为1 h,DO为6 mg/L的情况下,陶粒BAF对CODMn和NH3—N的去除率分别为23%和80%;沸石BAF的去除率分别为27%和84%;组合填料BAF去除效果最好,去除率分别为32%和92%。     

FPGA技术在数字演播室传输系统中的应用

随着高清技术的不断进步与发展,数字箱载演播室也在向着高清的应用发展。然而由于高清视频码流的高速率,传统的三同轴传输技术不再适应。光纤传输是一个选择,但是光纤不仅成本高,而且在移动中比较容易损坏。对于一些低成本用户,光纤技术显然是不适用的。文章提出了一种经济适用的传输方式,传输质量也满足演播室的要求。这种传输方式在FPGA中都已经得到实现。系统运行稳定、音视频质量好且成本低。     

Balancing MXene Surface Termination and Interlayer Spacing Enables Superior Microwave Absorption

Surface chemistry and interlayer engineering determines the electrical properties of 2D MXene. However, it remains challenging to regulate the surface and interfacial chemistry of MXene simultaneously. Herein, simultaneous modulation of Ti₃C₂T_x MXene surface termination and layer spacing by alkali treatment are achieved. The electrical and electromagnetic properties of Ti₃C₂T_x are investigated in detail with respect to KOH and ammonia concentration dependence. A high concentration of KOH caused the Ti₃C₂T_x layer spacing to expand to 13.7 Å and the surface O/F ratio to increase to 33.84. Because of its weaker ionization effect, ammonia provides finer tuning compared to the drastic intercalation of KOH with a thorough sweeping of the F-containing groups. Ti₃C₂T_x is enriched with conductive -OH termination after ammonia treatment, which achieves an effective balance with the increased interlayer resistance. Therefore, NH₃H₂O-Ti₃C₂T_x achieves broad-band impedance matching and exhibits an efficient microwave loss of −49.1 dB at a low thickness of 1.7 mm, with an effective frequency bandwidth of 3.9 GHz. The results herein optimize the electrical properties of Ti₃C₂T_x using surface and interfacial chemistry to achieve broad microwave absorption, providing a framework for enhancing the electromagnetic wave loss of intrinsic MXene.     

Ligand Design in Atomically Precise Copper Nanoclusters and Their Application in Electrocatalytic Reactions

Metal nanoclusters (MNCs) are compositionally well-defined and also structurally precise materials with unique molecule-like properties and discrete electronic energy levels. Atomically precise ligand-protected Cu nanoclusters (LP-CuNCs) are one category of typical MNCs that usually demonstrate unique geometric and electronic structures to serve as electrocatalysts. However, the synthesis, application, as well as structure-performance relationship of LP-CuNCs are not adequately studied. Significantly, the ligands are essential to the geometric structure, crystal structure, size, and electronic structure of LP-CuNCs, which determine their physiochemical properties and applications. In this review, significant progress in the ligand design of LP-CuNCs, and their application in electrocatalytic reactions is introduced. The general basics of ligand-protected MNCs (LP-MNCs) are first introduced and the functions of ligands are emphasized. Subsequently, a series of different ligands for LP-CuNCs including thiolates, phosphines, alkynyl, polymers, and biomolecules are highlighted. Thereafter, their applications in different electrocatalytic reactions are discussed. It is believed that this review will not only inspire the design and synthesis of novel LP-CuNCs, but also contribute to the extension of their applications in electrocatalytic reactions and the establishment of accurate structure-performance relationships.     

视场非完全重叠的分布式雷达多目标跟踪方法

在探测能力、波形设计及天线指向等因素制约下,分布式雷达视场并非完全重合,由此造成的观测信息差异给后续信息融合带来了巨大挑战。该文基于高斯混合实现的集势概率假设密度(CPHD)滤波器,提出了一种视场部分重叠下的分布式雷达多目标跟踪方法。首先,利用多目标密度乘积切分出概率假设密度(PHD)中表征共同观测信息的部分;之后,标准的分布式融合(算术平均或几何平均融合)方法作用于切分出的共同观测目标信息以提升跟踪性能,补偿融合则作用于雷达单独观测目标信息以扩展视场范围。该文方法无须视场先验信息,能够适应雷达视场未知时的分布式融合多目标跟踪场景。仿真实验验证了所提出方法在未知、时变雷达视场下跟踪多目标的性能,表明了该文方法比基于高斯混合的聚类方法性能更好。      

编码协作系统准循环重复累积码的联合设计与性能分析

重复累积(RA)码是一种特殊结构的低密度奇偶校验(LDPC)码,不仅具有LDPC码的优点,还能实现差分编码。针对LDPC编码协作系统编码复杂度高、时延长的问题,该文引入准循环RA(QC-RA)码,推导出信源节点和中继节点采用的QC-RA码对应的联合校验矩阵,基于公差构造方法设计该联合校验矩阵,并证明该方法设计的联合校验矩阵不存在围长为girth-4, girth-6的短环。理论分析和仿真结果表明,同等条件下该系统比相应点对点系统具有更优异的误码率性能。仿真结果同时表明,与采用一般构造QC-RA码或基于Z型构造QC-RA码相比,采用基于公差构造的联合设计QC-RA码的多信源多中继协作均可获得更高的编码增益。     

Re-weighting regression and sparsity regularization for multi-view classification

Applied Intelligence - Multi-view data widely exists in real life, which contains rich and comprehensive information. Multi-view learning aims to make full use of the information of multiple views...     

Multi-response optimization of the electrical discharge machining of insulating zirconia

In this study, electrical discharge machining has been used to machine insulating zirconia via the assisting electrode method. The process parameter optimization was investigated by combining the Taguchi method with grey relational analysis. The application of Taguchi–grey relational analysis is proven to effectively improve the performance of electrical discharge machining in drilling insulating zirconia. The results of this analysis indicate that the final optimal process parameters are a peak current of 8 A, a pulse duration of 16?µs, a duty cycle of 0.5, and a flushing pressure of 6?MPa. Additionally, the material removal rate, electrode wear rate, and hole taper ratio increase by 39%, 1.5%, and 1.3%, respectively, which improves the grey relational grade by 6.8%. The electrical resistance test confirms that the conductivity of the conductive layer obtained using the final optimal process parameters is better than that of the conductive layer obtained using the initial optimal process parameters. Energy spectrum analysis reveals that the conductive layer is composed of C, Cu, Zn, Zr, and O. Analysis of variance shows that the most significant component of the multi-responses is the peak current, with a 51.4% contribution.     

Lateral Magnetically Modulated Multilayers by Combining Ion Implantation and Lithography

The combination of lithography and ion implantation is demonstrated to be a suitable method to prepare lateral multilayers. A laterally, compositionally, and magnetically modulated microscale pattern consisting of alternating Co (1.6 µm wide) and Co‐CoO (2.4 µm wide) lines has been obtained by oxygen ion implantation into a lithographically masked Au‐sandwiched Co thin film. Magnetoresistance along the lines (i.e., current and applied magnetic field are parallel to the lines) reveals an effective positive giant magnetoresistance (GMR) behavior at room temperature. Conversely, anisotropic magnetoresistance and GMR contributions are distinguished at low temperature (i.e., 10 K) since the O‐implanted areas become exchange coupled. This planar GMR is principally ascribed to the spatial modulation of coercivity in a spring‐magnet‐type configuration, which results in 180° Néel extrinsic domain walls at the Co/Co‐CoO interfaces. The versatility, in terms of pattern size, morphology, and composition adjustment, of this method offers a unique route to fabricate planar systems for, among others, spintronic research and applications.