棒材穿水冷却过程温度场有限元分析

针对棒材穿水冷却过程,利用ANSYS有限元分析软件建立了棒材温度场预报模型,研究了棒材穿水冷却过程中的热边界条件,分析了棒材温度场的分布及其变化规律。该模型的计算结果与实测值吻合较好,能够准确地预测棒材穿水冷却后的温度分布和最终的组织。     

The feature-based posterior crown design in a dental CAD/CAM system

This paper presents a newly developed CAD approach for a quick and accurate design of a dental posterior prosthesis. The approach arises from the basic idea that every human tooth has its own specific features. Based upon the features of the standard posterior tooth, the initial data containing the defined feature points are firstly acquired from the scanned points of the standard tooth. The standard prosthetic profile is thereby formulated using the bicubic Nurbs surface fitting technique. This profile has the two functions of possessing the same features with the patient’s missing posterior tooth, and the adjustability with the feature points and the defined B-spline profile feature curves. For the purpose of the adjustment of the established model, the global and occlusal feature curves are proposed considering the individual patient’s original information. According to these curves, the corresponding standard prosthetic profile is locally adjusted to meet the fit of the global size and occlusal surface. Finally, a close and continuous profile of a posterior crown is generated. Using this design, a posterior prosthesis is successfully manufactured in the computer-aided machining process.     

EMMP: a highly efficient membership management protocol

Gossip (or epidemic) algorithms have recently become popular solutions to multicast message dissemination in peer-to-peer systems. Nevertheless, it is not straightforward to apply gossip to on-demand streaming because it often fails to achieve a timely delivery. To solve this problem and taking into account the characteristic of peers randomly joining and leaving in peer-to-peer systems, an Efficient Membership Management Protocol (EMMP) has been presented. Every node only needs to keep contact with O (log(N)) nodes, and EMMP can support the reliable dissemination of messages. Considering the “distance” between peers, it causes the major data to be transmitted in a local area and reduces the backbone’s traffic, and speeds up the dissemination of messages between peers. This paper has adopted the “goodfriend” mechanism to reduce the influence on the system when a peer fails or leaves. Simulation results show that EMMP is highly efficient, and both the redundancy and the delay of the system are well solved.     

A Novel Athermal 40-Channel DWDM Multi/Demultiplexer Based on the Combination of AWGs and Interleaver

An athermal 40-channel dense wavelength-division-multiplexing multi/demultiplexer using a novel combination technology is proposed. It consists of one 1times4 100- to 400-GHz spacing interleaver filter and four sub-arrayed-waveguide gratings (AWGs). The temperature-dependent wavelength shift of the combined device is successfully suppressed to 0.058 nm in the -20degC to 70degC temperature range. Moreover, the combined device's adjacent crosstalk (typically -35 dB) is much better than conventional AWGs (typically -25 dB).     

MRF: A Framework for Source and Destination Based Bandwidth Differentiation Service

In this paper, we shall generalize the concepts of fairness, TCP-friendliness and TCP-compatibility such that more source adaptation schemes can be designed to support diverse applications over the Internet. A simple but efficient framework, in the form of a monotonic response function (MRF), is proposed for the analysis and the design of memoryless window-based source adaptation protocols by using these concepts. We first derive a necessary and sufficient condition for step-wise convergence to the weighted fairness. It is then used to construct increase-decrease policies. The requirements of our increase-decrease policy are less conservative than those of the CYRF (Choose Your Response Function) that was proposed in . Our MRF is suitable for transmission control protocol (TCP) and user datagram protocol (UDP), and can be used to design TCP-friendly and multimedia-friendly source adaptation schemes. Meanwhile, our MRF can be applied to provide bandwidth differentiation service without any change to the router of the existing Internet.     

Study on combustion characteristics of blended coals

Power plants in China have to burn blended coal instead of one specific coal for a variety of reasons. So it is of great necessity to investigate the combustion of blended coals. Using a test rig with a capacity of 640 MJ/h with an absolute milling system and flue gas online analysis system, characteristics such as burnout, slag, and pollution of some blended coals were investigated. The ratio of coke and slag as a method of distinguishing coal slagging characteristic was introduced. The results show that the blending of coal has some effect on NO _x but there is no obvious rule. SO _x emission can be reduced by blending low sulfur coal. Translated from Proceedings of the CSEE, 2005, 25(18): 97–103 [译自: 中国电机工程学报]     

Emergy account for biomass resource exploitation by agriculture in China

On the basis of Odum's ecological economic measure of emergy as embodied solar energy, a system account of biomass resource exploitation by agriculture in China 2004 is developed in this paper, which supplements a former study on corresponding long-term historical trends during 1978 to 2000 (Chen et al., 2006. Emergy-based analysis of the Chinese agriculture. Agriculture, Ecosystems and Environment 115, 161–173). The aggregate fluxes and indicators for biomass resource exploitation in China 2004 are calculated and illustrated when compared with those for 2000 to elucidate the latest status of the Chinese agriculture as the exploitation sector for biomass resource. Data sources and algorithm are presented in detail as basic references for related analysis involving the ecological economy of biomass exploitation in agriculture.     

Electrical properties and positron annihilation study of (Ba<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ho<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)TiO<Subscript>3</Subscript> ceramics

DC resistivity, dielectric constant, dielectric loss and positron annihilation spectra of (Ba_1−x Ho _x )TiO₃ ceramics have been measured as a function of holmium concentration x. It has been found that the DC resistivity of (Ba_1−x Ho _x )TiO₃ is strongly dependent on the Ho content: it decreases three orders of magnitude and reaches a minimum at x = 0.4%. Doping with 0.6% holmium increases the permittivity of BaTiO₃ by approximately three times (from ∼1,300 to ∼4,000), with only a slight increase in the corresponding dielectric loss. The local electron density and defect concentration estimated using positron annihilation technique conforms well to the features found in the dielectric and resistivity measurements. The results have been discussed in terms of a mixed compensation model.     

Reliability Analysis on the δ-Shock Model of Complex Systems

We investigate the delta-shock model of complex systems consisting of n i.i.d. components. We first obtain a general lifetime distribution for the delta-shock model of a general complex system by reducing the system to a linear combination of parallel systems. We then consider coherent system structures including series, parallel, and k-out-of-n, then derive some useful results including reliability bounds, bounds on the mean lifetime, limiting distributions, and Laplace-Stieltes transforms