智能公交移动平台实时查询客户端

随着智能手机和高速移动网络的普及,智能公交查询系统作为一个城市化的公共信息平台,可较大程度上方便广大民众的日常出行．目前,Android平台上的公交查询客户端分为两种,一种是查询静态信息,如换乘方案,线路信息等,另外一种是公交实时运行状况的查询．本文在传统设计的基础上,采用本地数据库和HTTP连接双重查询方式,通过解析JSON数据,设计并实现了具有自动刷新功能的移动平台公交实时查询软件．在查询站点信息和线路信息基础上,将线路上即将到站车辆的运行位置信息实时显示在页面上,从而使用户清晰的了解当前公交运行情况,适当调节自己的出行计划,具有较高的现实意义．     

Controllable Fabrication of Co3−xMnxO4 with Tunable External Co3+/Co2+ Ratio for Promoted Oxygen Reduction Reaction

Co_3?xMn_xO₄ is a bimetal oxide with excellent electrochemical activity in alkaline solution, has been regarded as a promising alternative in the field of ion-air batteries and proton exchange membrane fuel cell (PEMFC). Herein, we report a simple solvothermal-calcination method to fabricate Co_3?xMn_xO₄ with tunable external Co³⁺/Co²⁺ and Mn³⁺/Mn²⁺ ratio. The tunable ratio of element valence in the bimetal results in a higher exposure of active center for oxygen redox reaction (ORR), and thus lead to a better ORR activity, which was confirmed by X-ray photoelectron spectroscopy characterizations and electrochemical measurements. Specially, Co_1.8Mn_1.2O₄ with a Co³⁺/Co²⁺ ratio of 2.08 showed an overpotential of 0.37 V at benchmark ORR current density of 3 mA/cm² in 0.1 M KOH, which is lower than that of pure oxide (Mn₃O₄ 0.53 V and Co3O4 0.56 V). In addition, the as prepared Co_1.8Mn_1.2O₄ exhibited a positive half-wave potential (0.83 V vs RHE) due to their more active sites, promotes charge transfer, adsorption and desorption of oxygen species. This work provides a strategy for the design and fabrication of earth-abundant, low-cost electrocatalysts for PEMFC in practical applications.

Graphic Abstract

Co_3?xMn_xO₄ was fabricated by tuning external Co³⁺/Co²⁺ and Mn³⁺/Mn²⁺ ratio, and the activity initially shows a positive correlation with the ration of Co³⁺/Co²⁺ in Co_3?xMn_xO₄.

     

浅论WLAN技术在弱电工程中的应用

随着网络技术的发展,无线网络技术应用也越来越多,利用WLAN技术是减少网络线缆敷设的手段之一。本文对无线网络技术进行介绍,并且对WLAN技术在弱电工程中的实际应用进行了研究。     

Epitaxy growth and directed crystallization of high-density polyethylene in the oriented blends with isotactic polypropylene

Various lamellar orientations of high-density polyethylene (HDPE), due to competition between bulk nucleation and interfacial nucleation, have been realized in its melt drawn blends with isotactic polypropylene (iPP) upon cooling after subjected to 160 °C for 30 min. Directed crystallization, with heterogeneous nucleation in the bulk (within domains), is defined as lamellar growth along boundary of anisotropic domains and is favored in larger domains at higher temperature (slow cooling), since overgrowth of lamellae can feel the interface rather than impingement with neighbor ones as a result of scare nuclei at higher temperature. Moreover, lamellar growth caused by directed crystallization is dependent of dimension of confinement. Due to 2D confinement of cylindrical domains, lamellae can only grow along the axis of cylinder and thus b-axis orientation is formed. While in the layered domains with 1D confinement, however, lamellae grow with the normal of (110) plane along the melt drawn direction. On the other hand, epitaxial growth of HDPE chains onto iPP lamellae is related to the surface-induced crystallization and dominated by the interfacial nucleation. Only interfacial nucleation is preferred can epitaxial growth occur. Therefore, retarded crystallization, realized by either strong confinement in finer domains or rapid cooling or both, is favorable for it.     

C_9 FK的表面活性测定

用吊片法和自制改进的最大泡压法分别测定了全氟庚氧基全氟亚乙基磺酸钾(C9FK)溶液的平衡和动态表面张力,计算得出该种表面活性剂形成胶束的标准热力学函数△Hmθ、△Smθ、△Gmθ分别为16．98 kJ／mol、218．29 J／mol·K、-48．22 kJ／mol。结合Word-Tordai方程,计算得到在不同条件下的表观扩散系数Da和吸附势垒Ea。实验证明,增大表面活性剂的浓度、降低温度、以及无机盐(NaCl)的加入都会使扩散系数减小,吸附势垒增大,从而不利于吸附的进行。当表面活性剂的浓度小于等于1×10-6 mol/L时,该体系属于扩散控制模型,而浓度大于 1×10-6 mol/L时,在吸附初期(t→O)属于扩散控制,后期均属于混合控制模型。     

Influence of polymerization conditions on the structure and properties of polyethylene/polypropylene in‐reactor alloy synthesized in the gas phase with a spherical Ziegler–Natta catalyst

A spherical TiCl₄/MgCl₂‐based catalyst was used in the synthesis of in‐reactor polyethylene/polypropylene alloys by polyethylene homopolymerization and subsequent homopolymerization of propylene in the gas phase. Different conditions in the ethylene homopolymerization stage, such as monomer pressure and polymerization temperature, were investigated, and their influences on the structure and properties of in‐reactor alloys were studied. Raising the polymerization temperature is the most effective way of speeding up polymerization and regulating the ethylene content of polyethylene (PE)/polypropylene (PP) alloys, but it will cause a greater increase in the PE‐b‐PP block copolymer fraction (named fraction D) than in the fraction of PP‐block‐PE in which the PP segments have low or medium isotacticity (named fraction A). Although changing ethylene monomer pressure could influence the ethylene content of PE/PP alloys slightly, it is an effective way of regulating the structural distribution. Reducing the monomer pressure will evidently increase fractions A and D. The mechanical properties of the alloys, including impact strength and flexural modulus, can be regulated in a broad range with changes in polymerization conditions. These properties are highly dependent on the amount, distribution, and chain structure of fractions A and D. The impact strength is affected by both fraction A and fraction D in a complicated way, whereas the flexural modulus is mainly determined by the amount of fraction A. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2136–2143, 2006     

Graft copolymerization of styrene onto casein initiated by potassium diperiodatonickelate (IV) in alkaline medium

A novel redox system, potassium diperiodatonickelate (Ni(IV))‐casein is used to initiate graft copolymerization of Styrene onto casein under different conditions in aqueous alkaline solution. Graft copolymers with both high grafting efficiency (>98%) and percentage of grafting(>300%) are obtained, which indicated that (Ni(IV))‐casein redox pair is an efficient initiator for this grafting. The effects of reaction parameters, such as monomer‐to‐casein weight ratio, initiator concentration, pH, time, and temperature, are investigated. A tentative initiation mechanism is proposed. The structures and properties of the graft copolymer are characterized by Fourier transform infrared Spectroscopy, X‐ray diffraction diagrams, and Scanning Electron Microscope. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4247–4251, 2006     

多Agent系统在广域后备保护中的应用

北美几次大停电事故的分析表明,传统后备保护在系统故障时引起的异常运行状态下容易误动作,引起电网的连锁跳闸.因而随着通信网络和广域测量系统的发展,广域后备保护的研究受到国内外学者的广泛关注.近几年来人们尝试将广域后备系统与新兴的多Agent系统相结合,以加速故障的切除.多Agent系统在广域后备保护中的应用才刚起步,还值得深入研究与探讨.介绍了多Agent系统的概念,讨论了多Agent系统在广域后备保护中的应用,包括其体系结构、保护算法和IP通信实现.     

《抱朴子》反义词的判定与类型

参酌各家之说确定了判定反义词的原则和对反义词的统计方法,并从词性和反义词概念间的关系两个不同的角度对《抱朴子》中的反义词进行了分类,从而加深了对反义词性质和作用的了解。     

新形势下农村基层党组织新格局的研究

新时期农村基层党组织建设面临新情况新问题,加强和改进党的农村基层组织建设,是事关巩固党的执政基础.提高党的执政能力,推进农村小康建设的基础性工程,必须正视当前农村基层组织建设中存在的突出问题,认真分析产生问题的种种原因,推动城乡统筹的基层党组织新格局的构建,使党的农村基层组织真正成为党全部工作和战斗力的基础,落实党的路线方针政策和各项工作任务的战斗堡垒.