Rapid and comprehensive indicator for evaluation of performance of treatment processes and of river waters.

Naturally occurring UV active compounds, commonly present in almost all source waters, can be rapidly monitored by their ultraviolet absorbance at 260 nm (E260). Herein, the extent of correlation between the E260 and the removal efficiency of the hazardous contaminants, endocrine disrupters and dioxins, were investigated using various treatment and river source waters. The detection of various types of hazardous contaminants using sophisticated analytical methods, such as high resolution gas chromatography (HRGC)/high resolution mass spectrometry (HRMS) and high performance liquid chromatography (HPLC)/inductively coupled plasma (ICP)/mass spectrometry (MS), as well as various short-term bioassays, can require hours or even days for results to be obtained. The removal of the E260 correlated well with those of individual contaminants, such as endocrine disruptor chemicals and dioxins, with the various treatment processes employed. In the plots of the endocrine disrupters against the DOC/E260, a correlation was found with the endocrine activity of the Korean/Japanese river waters employed in this study.     

Observation and Analysis of Gypsum Particleboard using SEM

The microstructures of gypsum board and gypsum particleboard were observed by SEM. The effects of retarder and waterproof agent on the shape and the average dimension of the gypsum crystal were discussed. The mechanism was investigated as well. Four typical instances, i e, the gypsum crystal shape, the gypsum combined with particles on the particles surface, the gypsum combined with particles on the wood cross section and the gypsum combined with particles inside the wood cell cavity were selected and observed. Furthermore, the agglomeration and cementation mechanism between gypsum and particle were studied.     

Value management and common accounting performance measures for corporations

Management is aware that the value of firms is the ultimate measure of company performance. However, management has been using common accounting measures as an operating guide because the linkage between operational planning and value is vague and complex and, therefore, difficult to apply. Managers need to have clear targets and performance measures to track progress. This paper examines if a set of common accounting performance measures are linked tightly to the overall value of the firm. An abductive learning network (ALN) approach, an artificial intelligence technique, is used in this research because an ALN approach is non-parametric and can capture a subtle dynamic relationship between input and output variables, which is not obvious in linear statistical analysis. Empirical results show that an ALN model is very effective in synthesizing the value of the firm using six common accounting variables. The results also provide four strategic variables that can be used for devising strategic and operating plans to maximize the value of firms.     

StoryGrid [educational computing]

The StoryGrid project undertook studying the role new interface technologies might play in education, particularly at the high school level. Unfortunately, technology often seizes center stage in high school classrooms; i.e., it becomes the topic of instruction. We believe that learning about technology would be most successful when technology is not the topic, but simply a tool used during instruction. StoryGrid, therefore, was designed to support and to enhance existing narrative activity in classrooms by adhering to the following goals: trigger reflection and interpretation, accommodate individual expression and encourage student discourse.     

Damaged layer characteristics in micro-endmilling of copper using an ultrahigh-speed air spindle

This paper presents an investigation on the characteristics of damaged layer in micro-machining by using the ultrahigh-speed air spindle. The damaged layer in metal cutting is derived from plastic deformation and transformation of metal structure. In this study, micro-cutting force, surface roughness, and plastic deformation layer according to the variation of machining conditions were investigated by experiments. The damaged layer was measured using optical microscope for the samples prepared by metallographic techniques. Its scale was dependent on cutting process parameters, especially feed per tooth. According to experimental results, it was verified that the thickness of damaged layer was increased with increasing of feed per tooth and cutting depth, also thickness of damaged layer was reduced in down-milling compared to upmilling during micro-endmilling operation.     

Flight schedule design for a charter airline

We consider the problem of designing the flight schedule for a charter airline. Exploiting the network structure of the problem, we develop exact and approximate models and solution approaches, and compare their results using data provided by an airline. We show that quality results can be generated using the exact approach or the heuristic approach, with the heuristic approach capable of generating good solutions very quickly.     

Compact Dipole Antenna for Terrestrial Digital Multimedia Broadcasting Service

A compact dipole antenna for the terrestrial digital multimedia broadcasting (TDMB) application is presented. The length of the antenna is about 0.06λ at the TDMB resonance frequency of 190 MHz. Miniaturization of the antenna is achieved by using meander structures and lumped elements. The proposed antenna has two resonance frequencies and covers the TDMB band from 174 MHz to 216 MHz in Korea. The antenna has good impedance bandwidth and radiation characteristics for the TDMB. The experimental results of the designed dipole antenna are presented and analyzed.     

Technical note: Usability evaluation of the modified CIE1976 Uniform‐Chromaticity scale for assessing image quality of visual display monitors

White uniformity indicates the degree of uniform distribution of white color across the display screen and is one of the important inspection factors determining the image quality of a visual display unit (VDU). Experiments in which participants were confronted with 6 evaluation points embedded in 3 measurement groups on a VDU screen were conducted to gather the psychophysical data that include the levels of white uniformity obtained from participants and a colorimetric system (CA‐100). In an accuracy test, 37.12% of the participants showed the same conclusion led by the original CIE1976 criteria, and 62.88% of the participants showed the same conclusion led by the modified equation. In magnitude estimation evaluating the display's white uniformity, the magnitude score of the modified equation (0.36) was significantly larger than that of the original equation (0.32). It was concluded that the modified equation is more sensitive to the change of white uniformity. © 2003 Wiley Periodicals, Inc. Hum Factors Man 13: 85–95, 2003.     

Tracing success: graphical methods for analysing successful collaborative problem solving

The aim of this paper is to evaluate the use of trace diagrams for analysing collaborative problem solving. The paper describes a study where trace diagrams were used to analyse joint navigation in a virtual environment. Ten pairs of undergraduates worked together on a distributed virtual task to collect five flowers using two bees with each participant controlling one of the bees. This task is used extensively in research on multi-robot systems. The joint navigation of the pairs was analysed using trace diagrams. They showed that more successful pairs divided the task up, showed very little overlap and very little backtracking. Whereas, the less successful pairs, showed no task division, there was significant overlap and extensive backtracking. From this analysis we developed numerical measures of task division, overlap and backtracking. Task division was significantly and negatively related with task performance. Backtracking and overlap were significantly and positively correlated.     

Optimal control of accelerator concentration for resin transfer molding process

Resin cure following mold filling is an essential element in resin transfer molding. To fabricate a composite part with high dimensional stability and minimize residual stress, uniform resin cure should be achieved. This study considers a three-part resin system composed of epoxy, hardener and accelerator. The cure kinetics can be controlled by the accelerator concentration at the injection gate. A numerical method that can predict degree of cure distribution based on accelerator concentration at the gate was proposed. The degree of cure distribution is obtained by solving the resin flow, heat transfer, accelerator concentration and cure problems sequentially. Utilizing this numerical method, an optimal variation of accelerator concentration during mold filling was sought by solving a constrained optimization problem. The effect of accelerator control on degree of cure distribution was investigated and its validity was examined for two different geometries.