A new three-level soft-switched converter

A three-level, constant-frequency, isolated converter which employs a coupled inductor to achieve zero-voltage switching of the primary switches in the entire line and load range is described. Because the coupled inductor does not appear as a series inductance in the load current path, it does not cause a loss of duty cycle or severe voltage ringing across the output rectifiers. The operation and performance of the proposed converter was verified on a 1-kW prototype.     

Forward-stepwise regression analysis for fine leak batch testing of wafer-level hermetic MEMS packages

An advanced regression scheme is proposed to analyze fine leak batch testing data of multiple MEMS packages. The scheme employs the forward-stepwise regression method to infer the information of leaky packages from a batch test data. The analysis predicts the number of leaky packages and the true leak rate of each leaky package in a progressive manner. The scheme is implemented successfully using an actual batch test data obtained from wafer-level hermetic MEMS packages. An error analysis is followed to define the applicable domain of the scheme. Advanced formulations are also suggested to extend the applicable domain.     

A Multi‐Strategic Concept‐Spotting Approach for Robust Understanding of Spoken Korean

We propose a multi‐strategic concept‐spotting approach for robust spoken language understanding of conversational Korean in a hostile recognition environment such as in‐car navigation and telebanking services. Our concept‐spotting method adopts a partial semantic understanding strategy within a given specific domain since the method tries to directly extract pre‐defined meaning representation slot values from spoken language inputs. In spite of partial understanding, we can efficiently acquire the necessary information to compose interesting applications because the meaning representation slots are properly designed for specific domain‐oriented understanding tasks. We also propose a multi‐strategic method based on this concept‐spotting approach such as a voting method. We present experiments conducted to verify the feasibility of these methods using a variety of spoken Korean data.     

Inverted Staggered Poly-Si Thin-Film Transistor With Planarized SOG Gate Insulator

In this letter, we have studied the inverted staggered thin-film transistor (TFT) using a spin-on-glass (SOG) gate insulator and a low-temperature polycrystalline silicon (poly-Si) by Ni-mediated crystallization of amorphous silicon. The p-channel poly-Si TFT exhibited a field-effect mobility of 48.2 cm²/V ldr s, a threshold voltage of -4.2 V, a gate-voltage swing of 1.2 V/dec, and a minimum off-current of < 4 times 10^-13A/ mum at V_ds = -0.1 V. Therefore, the gate planarization technology by SOG can be applicable to low-cost large-area poly-Si active-matrix displays.     

Aptamer‐Functionalized Multidimensional Conducting‐Polymer Nanoparticles for an Ultrasensitive and Selective Field‐Effect‐Transistor Endocrine‐Disruptor Sensors

An endocrine disruptor (ED) is a type of xenobiotic compound that can cause serious diseases related to the estrous cycle, as well as various types of cancer. At low ED concentrations, estrogen receptors may respond as they would under physiological conditions. In this work, aptamer‐functionalized multidimensional conducting‐polymer (3‐carboxylate polypyrrole) nanoparticles (A_M_CPPyNPs) are fabricated for use in an FET sensor to detect bisphenol A (BPA). The multidimensional system, M_CPPyNPs, is first produced by means of dual‐nozzle electrospray of pristine CPPyNPs and vapor deposition polymerization of additional conducting polymer. The M_CPPyNPs are then immobilized on an amine‐functionalized (–NH₂) interdigitated‐array electrode substrate, through the formation of covalent bonds with amide groups (–CONH). The amine‐functionalized BPA‐binding aptamer is then introduced in the same way as that for M_CPPyNP immobilization. The resulting A_M_CPPyNP‐based FET sensors exhibit ultrasensitivity and selectivity towards BPA at unprecedentedly low concentrations (1 fm ) and among molecules with similar structures. Additionally, due to the covalent bonding involved in the immobilization processes, a longer lifetime is expected for the FET sensor.     

Study on Characteristics of Various RF Transmission Line Structures on PES Substrate for Application to Flexible MMIC

In this work, the coplanar waveguide is fabricated on a PES (poly[ether sulfone]) substrate for application to a flexible monolithic microwave integrated circuit, and its RF characteristics were thoroughly investigated. The quality factor of the coplanar waveguide on PES is 40.3 at a resonance frequency of 46.7 GHz. A fishbone‐type transmission line (FTTL) structure is also fabricated on the PES substrate, and its RF characteristics are investigated. The wavelength of the FTTL on PES is 5.11 mm at 20 GHz, which is 55% of the conventional coplanar waveguide on PES. Using the FTTL, an impedance transformer is fabricated on PES. The size of the impedance transformer is 0.318 mm × 0.318 mm, which is 69.2% of the size of the transformer fabricated by the conventional coplanar waveguide on PES. The impedance transformer showed return loss values better than –12.9 dB from 5 GHz to 50 GHz and an insertion loss better than –1.13 dB in the same frequency range.     

Effect of plasma process-induced damage on bias temperature instability of MOSFETs

For a surface-channel n-MOSFET and a buried-channel p-MOSFET, the effect of plasma process-induced damage on bias temperature instability (BTI) was investigated. The gate oxide thickness, t_ox, of the test MOSFETs was 2.0, 3.0, or 4.5 nm. The shifts of threshold voltage V_th and of linear drain current I_dlin were measured after applying a BTI stress at a temperature of 125 °C. The measured shifts of V_th and I_dlin indicate that BTI on ultra-thin gate CMOS devices appears only in the form of SiO₂/Si interface degradation, and that the positive BTI for the n-MOSFET as well as the negative BTI for the p-MOSFET is important for the reliability evaluation of CMOS devices. Because of positive plasma charging to the gate, a protection diode was very efficient at reducing BTI for the p-MOSFET, but it was much less effective for the n-MOSFET.     

A novel hidden station detection mechanism in IEEE 802.11 WLAN

The popular IEEE 802.11 wireless local area network (WLAN) is based on a carrier sense multiple access with collision avoidance (CSMA/CA), where a station listens to the medium before transmission in order to avoid collision. If there exist stations which can not hear each other, i.e., hidden stations, the potential collision probability increases, thus dramatically degrading the network throughput. The RTS/CTS (request-to-send/clear-to-send) frame exchange is a solution for the hidden station problem, but the RTS/CTS exchange itself consumes the network resources by transmitting the control frames. In order to maximize the network throughput, we need to use the RTS/CTS exchange adaptively only when hidden stations exist in the network. In this letter, a simple but very effective hidden station detection mechanism is proposed. Once a station detects the hidden stations via the proposed detection mechanism, it can trigger the usage of the RTS/CTS exchange. The simulation results demonstrate that the proposed mechanism can provide the maximum system throughput performance.     

Latch Applicator for Efficient Delivery of Dissolving Microneedles Based on Rapid Release of Elastic Strain Energy by Thumb Force (Adv. Funct. Mater. 11/2023)

Dissolving microneedle (DMN) is an attractive alternative to parenteral and enteral drug administration owing to its painless self-administration and safety due to non-generation of medical waste. For reproducible and efficient DMN administration, various DMN application methods, such as weights, springs, and electromagnetic devices, have been studied. However, these applicators have complex structures that are complicated to use and high production costs. In this study, a latch applicator that consists of only simple plastic parts and operates via thumb force without any external complex device is developed. Protrusion-shaped latches and impact distances are designed to accumulate thumb force energy through elastic deformation and to control impact velocity. The optimized latch applicator with a pressing force of 25 N and an impact velocity of 5.9 m s⁻¹ fully inserts the drug-loaded tip of the two-layered DMN into the skin. In an ovalbumin immunization test, DMN with the latch applicator shows a significantly higher IgG antibody production rate than that of intramuscular injection. The latch applicator, which provides effective DMN insertion and a competitive price compared with conventional syringes, has great potential to improve delivery of drugs, including vaccines.     

Modeling Transmission of Microwaves Through Dynamic Vegetation

In this paper, we develop a model for estimating canopy opacity tau for sweet corn. We estimate the refractive index based upon moisture distribution in the corn during different stages of growth. The moisture distribution was observed during two season-long field experiments. We found that the moisture content decreased linearly as the height of the corn increased, with the distribution closer to Gaussian in the fruit region during reproductive stages. The tau obtained from our model was compared to that estimated using a widely used Jackson model. In general, our tau estimates were higher than those obtained using the Jackson model, with a root mean-square difference (rmsd) of up to 0.23 Np between the two models. The tau values were used in a microwave emission model at C-band, and the model estimates of brightness were compared with field observations. We found that the model brightness temperatures matched well with observations, with rmsd values of 5.13 and 4.88 K, using our model and the Jackson model for tau, respectively.