Electrochemically Assisted Photocatalysis of Hybrid WO3/TiO2 Films: Effect of the WO3 Structures on Charge Separation Behavior

In this study, the photocatalysis of hybrid WO₃/TiO₂ films with different loadings of WO₃ were investigated with and without potential bias. It was clearly indicated that hybrid WO₃/TiO₂ films show less photo-reactivity under only UV-irradiation, while more effective photocatalysis under potential bias than either TiO₂ or WO₃ by themselves, their photocatalytic performance depending on the loadings of WO₃. In particular, a hybrid WO₃/TiO₂ film involving an amorphous-like WO₃ phase plays a significant role in an enhancement of the electrochemically assisted photocatalysis.     

Removal of phosphate ions with a chemically modified chitosan/metal‐ion complex

The adsorption of metal ions (Mo⁶⁺, Cu²⁺, Fe²⁺, and Fe³⁺) was examined on chemically modified chitosans with a higher fatty acid glycidyl (CGCs), and the adsorption of Cu²⁺ was examined on ethylenediamine tetraacetic acid dianhydride modified CGCs (EDTA‐CGCs) synthesized by the reaction of the CGCs with ethylenediamine tetraacetic acid dianhydride. The adsorption of phosphate ions onto the resulting substrate/metal‐ion complex was measured. Mo⁶⁺ depicted remarkable adsorption toward the CGCs, although all the Mo⁶⁺ was desorbed under the adsorption conditions of the phosphate ions. The other metal ions were adsorbed to some extent on CGCs by chelating to the amino group in the substrate, except for CGC‐1, which had the highest degree of substitution (83.9%). Considerable amounts of Fe²⁺ were adsorbed onto CGCs; however, only a limited number of phosphate ions was adsorbed onto the substrate/metal‐ion complex. As a result, the following adsorbent/metal‐ion complexes gave higher adsorption ability toward phosphate ions: CGC‐4/Cu²⁺, CGC‐4/Fe³⁺, and EDTA‐CGC‐3/Fe³⁺. Where, CGC‐3 is a chemically modified chitosan with the degree of substitution of 26.5 percentage, and CGC‐4 is one with the degree of substitution of 16.0 percentage. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of friction stir processing on microstructure of laser clad cobalt-based alloy

(The microstructural refinement of cobalt-based alloy (Stellite No. 6) by laser cladding and friction stir processing (FSP) was studied. A nanometer-sized microstructure consisting of fine carbide (particle size: 100–200 nm) and a grain (grain size: 150–250 nm) was successfully fabricated by the FSP on the laser clad cobalt-based alloy. The nanostructured cobalt-based alloy (Stellite No. 6) had an extremely high hardness of about 750 HV.     

Preparation of carbon-based transparent and conductive thin films by pyrolysis of silylated graphite oxides

Thin films of silylated graphite oxide were obtained from a chloroform/cyclohexane dispersion of n-hexadecylamine-intercalated silylated graphite oxide by a casting method at a low temperature. Carbon-based thin films were obtained from the pyrolysis of the resulting films under a reduced pressure at 500 °C or higher temperatures. The resulting samples were well adhered to the substrate because of the presence of silicon containing species as a “glue”. The resistivity decreased with an increase in the film thickness or a decrease in the transparency. Based on the data obtained for the samples prepared from graphite with different particle sizes and graphite oxide with different oxygen contents, the conduction of the electrons within each carbon sheet seemed important for large film thickness and conduction through the boundary seemed important when the film thickness was small. A low sheet resistance of 3.7 kΩ/sq for 80% of transmittance was achieved, when graphite oxide with a lower oxygen content was prepared from graphite with smaller particle sizes and the precursor film was heated at 500 °C. At 900 °C, it further decreased to a value of 700 Ω/sq.     

Calculations of heats of formation for nitroaromatics with PM3 and MM2

Abstract

We have attempted to calculate heats of formation (Δ H _f °) for various aromatic nitro compounds with the semi-empirical molecular orbital theory and the molecular mechanics. As the results we may say that PM3, a semi-empirical MO method, and MM2, molecular mechanics, can estimate Δ H _f ° of energetic materials with accuracy enough to use Δ H_f° for energy hazards prediction. In case of aromatic polynitro compounds, both methods may be able to calculate accurate Δ H_f°.     

Linking sanitation and wastewater treatment: from evaluation on the basis of effluent pollutant concentrations to evaluation on the basis of pollutant removal efficiencies

The evaluation of centralised wastewater treatment plants (WWTPs) in planning and management is sometimes based solely on effluent pollutant concentrations or pollutant loads. For sanitation purposes, the effluent pollutant concentrations/loads of WWTPs are important; of course, but from the point of view of wastewater treatment, the pollutant removal performance should also be evaluated. Focussing on low- and middle-income countries, especially those in tropical regions, published kinetics studies on biological WWTPs (such as oxidation ditches and aerated lagoons) are summarised in this paper. In most studies, effluent pollutant concentrations/loads are described as first-order linear functions of influent pollutant concentrations/loads. Therefore, pollutant removal efficiencies can be expressed as first-order linear functions of the reciprocal of influent pollutant concentrations/loads with negative coefficients. This implies that pollutant removal efficiencies increase with influent pollutant concentration/load increases. Based on pollutant removal efficiency functions, biological or ecological WWTPs when operating with small influent pollutant concentrations/loads should change their management to increase influent pollutant concentrations/loads in order to increase pollutant removal efficiencies. It may, however, be possible for technological development in wastewater treatment to overcome this problem.     

Numerical simulation on void bubble dynamics using moving particle semi-implicit method

In present study, the collapse of void bubble in liquid has been simulated using moving particle semi-implicit (MPS) code. The liquid is described using moving particles and the bubble–liquid interface was set to be vacuum pressure boundary without interfacial heat mass transfer. The topological shape of bubble can be traced according to the motion and location of interfacial particles. The time dependent bubble diameter, interfacial velocity and bubble collapse time were obtained under wide parametric range. The comparison with Rayleigh and Zababakhin's prediction showed a good agreement which validates the applicability and accuracy on MPS method in solving present momentum problems. The potential void induced water hammer pressure pulse was also evaluated which is instructive for further material erosion study. The bubble collapse with non-condensable gas has been further simulated and the rebound phenomenon was successfully captured which is similar with vapor-filled cavitation phenomenon. The present study exhibits some fundamental characteristics of void bubble hydrodynamics and it is also expected to be instructive for further applications of MPS method to complicated bubble dynamics problems.     

Correction of instrument measurement data for improving the visual color match between monitor and hardcopy

Abstract— Soft proofing, which can confirm the color reproduction of printed matter on a monitor, is coming into wide use in the field of graphic arts. However, there is a problem in that the color on the monitor looks different from that of printed matter, even though the L*a*b* value of the monitor's white point has been adjusted to that of the paper by using a spectroradiometer. After the color rendition of an LCD is visually adjusted to that of the paper, the measured color of the LCD shows color with L*a*b* values corresponding to a more greenish‐blue white than that of paper. For CRTs, this corresponds to a more bluish‐white. In this paper, it was assumed that bright lines in the measured spectrums of the monitors and the illuminations spread to the next wavelength band by the optical systems of the spectroradiometer. To solve the problem, a method is proposed to enhance the bright line by using a three‐tap digital filter. The effect of this method on two types of monitors under three types of illumination is also reported. After enhancing the bright lines, ΔE between the monitor and paper becomes smaller than that for the original one.     

Group behavior of agents with an emotional model

Recently, there has been much interest in the study of the formation of groups of agents that cause interactions between agents and invent new functions. We gave some agents an action rule based on the interactions of human feelings by using a circumplex model. It had been decided that the parameters of feelings in this model should have only two axes. In this report, eight basic action dimensions and pure feelings on four corresponding axes were given to agents as a model of feelings and actions based on the multiple factor analysis theory of R. Plutchik, and the behavioral characteristics of the group of agents were examined.     

Fabrication and operation limit of lead-free PTCR ceramics using BaTiO3–(Bi1/2Na1/2)TiO3 system

The electric properties of BaTiO₃–(Bi_1/2Na_1/2)TiO₃ (BT–BNT) solid solution ceramics were studied as a lead-free PTCR (positive temperature coefficient of resistivity) thermistor material usable over 130°C. For determining the maximum switching temperature T _s, the phase diagram of BT–BNT binary system was clarified. Two semiconductorization processes and their electric properties are described. The lanthanum(La)-doped BBNT ceramics sintered in air still showed dielectric behaviors, but the niobium(Nb)-doped ones had a low resistivity at room temperature, ρ _RT, on the order of 10³ Ωcm and showed a PTC behavior. Sintering under a low O₂ atmosphere produces BT–BNT ceramics with less than 10² Ωcm compared to those prepared in air. Our current research produced the BBNT ceramics with T _s values around 210°C by increasing the (Bi_1/2Na_1/2) content in the ceramics.