Ironmaking with ammonia at low temperature

This paper describes the reduction of hematite with ammonia for ironmaking, in which the effect of temperature on the products was examined. The results showed that the reduction process began at 430 °C during heating, and with an increase in temperature, the reduction mechanism changed apparently from a direct reduction of ammonia (Fe(2)O(3) + 2NH(3) → 2Fe + N(2) + 3H(2)O) to an indirect reduction via the thermal decomposition of ammonia (2NH(3) → N(2) + 3H(2), Fe(2)O(3) + 3H(2) → 2Fe + 3H(2)O) at temperatures over 530 °C. The final product obtained at 600 and 700 °C was pure metallic iron, in contrast with that formed at 450 °C, that is, a mixture of metallic iron and iron nitride. The results suggest the possibility of using ammonia as a reducing agent for carbonless ironmaking, which is operated at a much lower temperature than 900 °C in conventional coal-based ironmaking.     

PIV measurement and turbulence scale in turbulent combustion

We have investigated turbulent combustion by PIV (Particle Image Velocimetry) technique. Comparing with LDV data, the validity of PIV measurements has been confirmed. Particularly, the conditions of sampling number and spatial resolution have been shown to yield reliable data using PIV. Based on the velocity fields in cold flow and combustion, the interaction between flame and flow has been discussed. It was observed that the flow field is changed by combustion and the turbulence is reduced. In order to determine statistical quantities such as mean velocity and RMS of velocity fluctuation, a sampling number of 1000 is needed. Moreover, the velocity correlation coefficient was evaluated to obtain the integral length scale of the flow. For both cold flow and combustion, the PIV estimated scale is very close to that of LDV based on the assumption of Taylor's hypothesis. As a result, the spatial resolution in this study is about 6 times smaller than the integral length scale. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(7): 501–512, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20129     

Determinations of rare earth element abundance and U-Pb age of zircons using multispot laser ablation-inductively coupled plasma mass spectrometry

We have developed a new calibration technique for multielement determination and U-Pb dating of zircon samples using laser ablation-inductively coupled plasma mass spectrometry (ICPMS) coupled with galvanometric optics. With the galvanometric optics, laser ablation of two or more sample materials could be achieved in very short time intervals (~10 ms). The resulting sample aerosols released from different ablation pits or different solid samples were mixed and homogenized within the sample cell and then transported into the ICP ion source. Multiple spot laser ablation enables spiking of analytes or internal standard elements directly into the solid samples, and therefore the standard addition calibration method can be applied for the determination of trace elements in solid samples. In this study, we have measured the rare earth element (REE) abundances of two zircon samples (Nancy 91500 and Pre?ovice) based on the standard addition technique, using a direct spiking of analytes through a multispot laser ablation of the glass standard material (NIST SRM612). The resulting REE abundance data show good agreement with previously reported values within analytical uncertainties achieved in this study (10% for most elements). Our experiments demonstrated that nonspectroscopic interferences on 14 REEs could be significantly reduced by the standard addition technique employed here. Another advantage of galvanometric devices is the accumulation of sample aerosol released from multiple spots. In this study we have measured the U-Pb age of a zircon sample (LMR) using an accumulation of sample aerosols released from 10 separate ablation pits of low diameters (~8 μm). The resulting (238)U-(206)Pb age data for the LMR zircons was 369 ± 64 Ma, which is in good agreement with previously reported age data (367.6 ± 1.5 Ma). (1) The data obtained here clearly demonstrate that the multiple spot laser ablation-ICPMS technique can become a powerful approach for elemental and isotopic ratio measurements in solid materials.     

Spectral properties of nanoengineered Ag/Au bilayer rods fabricated by electron beam lithography

Ag/Au bimetallic nanoparticles possess the combinatory advantages of Au and Ag nanoparticles and can also be utilized to tune the properties of localized surface plasmon resonance. Ag/Au bilayer nanorods were prepared by electron beam lithography, and their spectral properties were investigated. Compared with Ag monolayer nanorods, Ag/Au bilayer nanorods show broader localized surface plasmon resonance bands, and the longitudinal mode and transverse mode localized surface plasmon bands show blueshift and redshift, respectively. The maximum near-field intensity of the longitudinal mode of the Ag/Au nanorod is less than half that of the Ag/Au nanorod without gold layer. Shape-induced modification of Ag/Au bilayer nanorods on their spectral properties was also discussed.     

Analyzing the interactions and miscibility of silk fibroin/mucin blends

Mucin, a glycoprotein with viscoelastic properties, and silk fibroin, a protein excreted from silkworms with properties of thermal and mechanical resistance, have been probed as building blocks in the design of biomaterials. Aiming to evaluate the interaction and miscibility between mucin and fibroin, we synthesized silk fibroin and mucin (SF/MU) blends for biomedical applications. The morphological analysis of the SF/MU blends showed the presence of two phases, suggesting a partial miscibility between the polymers. The degradation temperature of the SF/MU blends increased with an increase in the silk fibroin content, indicating that silk fibroin contributed to the thermal stability of the blends. The glass transition temperature of the SF/MU blends lay between the values of the pure polymers. The Fourier-transform infrared spectroscopy results pointed out that the interaction between fibroin and mucin occurred between the amine group of silk fibroin and mucin carboxyl and hydroxyl groups. The outcomes of this work provided essential information on the miscibility of the SF/MU blends. These findings will be critical for further studies with fibroin and mucin-based biomaterials, especially in mucoadhesive systems and wound healing applications.     

Focal calcium monitoring with targeted nanosensors at the cytosolic side of endoplasmic reticulum

Ca²⁺ distribution is spatially and temporally non-uniform inside cells due to cellular compartmentalization. However, Ca²⁺ sensing with small organic dyes, such as fura-2 and fluo-4, has been practically applied at a single cell level where the averaged signal from freely diffusing dye molecules is acquired. In this study, we aimed to target azide-functionalized fura-2 (N₃-fura-2) to a specific site of subcellular compartments to realize focal Ca²⁺ sensing. Using scAVD (single-chain avidin)–biotin interaction and a copper-free click reaction system, we linked N₃-fura-2 to specifically-targeted scAVD protein fused with a red fluorescent protein mCherry, so that Ca²⁺ sensors conjugated with four N₃-fura-2 dyes with dibenzocyclooctyne (DBCO)-PEG4-biotin as a linker were generated at subcellular compartments in living cells. In cytoplasm, N₃-fura-2 showed a prolonged retention period after binding to scAVD. Furthermore, the reacted N₃-fura-2 was retained inside cells even after free dyes were washed out by methanol fixation. When scAVD was overexpressed on endoplasmic reticulum (ER) membranes, N₃-fura-2 was accumulated on ER membranes. Upon histamine stimulation, which increases cytosolic Ca²⁺ concentration, ER-localized N₃-fura-2 successfully sensed the Ca²⁺ level changes at the cytosolic side of ER membrane. Our study demonstrated specific targeting of N₃-fura-2 to subcellular compartments and the ability of sensing focal Ca²⁺ level changes with the specifically targeted Ca²⁺ sensors.     

Development of ‘UR-System 2’: a training system for recovery of motor function of plegic upper limb after stroke

We developed a new training system, called ‘UR-System 2’, for the recovery of motor function of a plegic upper limb after stroke. UR-System 2, which was redesigned based on knowledge gained from clinical tests using UR-System 1, was newly equipped with a function for testing the motor function of patients, such as isolated movement. In order to verify the effectiveness of UR-System 2, we conducted the following procedures: we verified the safety of training in healthy persons; we gathered standard data on pronation and supination of healthy forearms during tests; and, we verified that the test function was effective in evaluating the recovery effect of isolated movement in two hemiplegic patients.