Capturing of transition by the RNG based algebraic turbulence model

This paper concerns the RNG based algebraic turbulence model. This model has characteristics to capture transitional process from laminar to turbulent flow. This is determined by the argument of the Heaviside function, which becomes a threshold for the occurrence of turbulence. It is supposed that proper modeling of this argument will lead to correctly capture transition location. In the present paper, this argument is modeled in such a way that the form of cubic equation for the turbulent kinematic viscosity be maintained. Moreover, the length scale which is required to calculate the turbulent kinematic viscosity is newly proposed, taking into account the freestream pressure gradient. The validation is performed by comparing the calculated results with the empirical expressions as well as the experimental data. This model can simulate the streamwise intermittency effect, by which a sudden increase of skin friction is prevented. Moreover, the transition location can be predicted within reasonable accuracy compared with the experimental data.     

Numerical computation of thermally controlled steam bubble condensation using Moving Particle Semi-implicit (MPS) method

In the present study, single steam bubble condensation behaviors in subcooled water have been simulated using Moving Particle Semi-implicit (MPS) method. The liquid phase was modeled using moving particles and the two phase interface was set to be a movable boundary which can be tracked by the topological position of the interfacial particles. The interfacial heat transfer was determined according to the heat conduction through the interfacial liquid layer and the coupling between momentum and energy was specially treated. Computational results showed that the bubble experiences various deformations at lower degrees of liquid subcooling while it remains nearly spherical at higher degrees of liquid subcooling. The bubble lifetime is nearly proportional to bubble size and is prolonged at higher system pressures. Bubble lifetime obtained from the MPS method agrees well with the experiments of 10 and 11, however it is lower than the predictions of Sudhoff et al. (1982). The underestimation is caused by severe bubble deformation at lower degrees of subcooling. The present study exhibits some fundamental characteristics of single steam bubble condensation and is expected to be instructive for further applications of the MPS method to evaluate more complicated bubble dynamics problems.     

Plastic Buckling Transition Modes in Moderately Thick Cylindrical Shells

Moderately thick perfect cylindrical shells under axial compression first exhibit an axisymmetric buckling mode, where a localization of buckling patterns, referred to as an elephant foot bulge, is caused by the first plastic bifurcation. However, the transition from the axisymmetric buckling mode to a nonaxisymmetric buckling mode, referred to as a diamond buckling mode, may occur due to the next bifurcation if we continue the loading under displacement control. Herein, this phenomenon is examined, based on a rigorous plastic bifurcation analysis. As a result, it is observed that the circumferential wave number of the diamond buckling mode increases with the decrease of the wall thickness. The boundary conditions also considerably influence the occurrence of diamond buckling. It is found that the strain concentration is intensified for the diamond buckling modes, compared with the axisymmetric modes.     

An anaerobic bacterium isolated from Japanese spiny lobster Panulirus japonicus

Eight strains of bacteria which could not grow under aerobic conditions, were isolated from Japanese spiny lobster. All the strains were Gram-positive, non-sporeforming cocci, and grew well under anaerobic conditions. The strains required a decreased oxygen tension rather than an increased CO₂ tension. Catalase, oxidase, nitrate reductase and urease were not produced. The strains fermented glucose, cellobiose, trehalose and levulose. Indole and H₂S were not produced. Macromolecule substances including starch, esculin, casein, gelatin and chitin were not hydrolyzed. Lactic acid was the sole product from peptone-yeast extract-Fildes solution-glucose broth. Fermentable carbohydrates were not required. The strains could grow at 20 to 37°C, and required NaCl for growth. From the above results, the strains were identified as anaerobic (aerotolerant) Streptococcus sp.     

Determination of Mark-Houwink-Sakurada equation for phenolic resins containing alkylenediamine in the main chain and estimation of their molecular conformation in tetrahydrofuran solution

Summary Phenolic resins containing alkylenediamine in the main chain could be prepared by the co-condensation reaction of phenol, formaldehyde and alkylenediamines such as ethylenediamine and hexamethylenediamine. The molecular structures were determined by¹H-NMR spectra, IR spectra and nitrogen content. The molecular conformation of these resins in THF solution were studied from the viscosity measurements, and it became clear that the molecules were considerably compact compared with linear vinyl polymers. To clarify the reason of this phenomenon, the resins whose degrees of branching were different from each other and the resins whose phenolic hydroxyl groups were acetylated were prepared. From viscosity data, it was pointed out that the intramolecular hydrogen bonding contributes to the compaction of the phenolic resins containing alkylenediamine in the main chain more strongly than the branching does.     

Novel transdermal drug delivery system with polyhydroxyalkanoate and starburst polyamidoamine dendrimer

In search of an efficient transdermal drug delivery system (TDDS), a polyhydroxyalkanoate (PHA)-based system with a polyamidoamine dendrimer was examined. Tamsulosin was used as the model drug. The dendrimer was found to act as the weak enhancer. By adding the dendrimer, the dendrimer-containing PHA matrix achieved the clinically required amount of tamsulosin permeating through the skin model. This is also the first report of the application of PHA and dendrimer to the TDDS.     

Proposal of failure criterion applicable to finite element analysis results for wall-thinned pipes under bending load

In this work, a failure criterion applicable to large strain Finite Element Analysis (FEA) results was proposed in order to predict both the fracture mode (collapse or cracking) and the limit bending load of wall-thinned straight pipes. This work was motivated from the recent experimental results of Tsuji and Meshii (2011); that is, fracture mode is not always collapse, and the fracture mode affects the limit bending load. The key finding in comparing their test results and a detailed large strain FEA results was that the Mises stress distribution at the limit bending load of a flawed cylinder was similar to that of a flawless cylinder; specifically, in case of collapse, the Mises stress exceeded the true yield stress of a material for the whole “volume” of a cylinder with a nominal wall thickness. Based on this finding, a failure criterion applicable to large strain FEA results of wall-thinned straight pipes under a bending load that can predict both fracture mode and limit bending load was proposed and was named the Domain Collapse Criterion (DCC). DCC predicts the limit bending load as the lower value of either the M_c^FEA, which is the load at which the Mises stress exceeds the true yield strength of a straight pipe for the whole “volume” with a nominal wall thickness (fracture mode: collapse), or the M_c^FEAb, which is the load at which the Mises stress in a section of the flaw ligament exceeds the true tensile stress (fracture mode: cracking). The results showed that the DCC could predict the fracture mode appropriately and the experimental limit bending load fundamentally on the conservative side within a maximum 20% difference regardless of the fracture mode. Another advantage of the DCC is that it uses the true yield and true tensile strength as the critical strength of the material and not the ambiguous flow strength.     

Simultaneous B-M-mode scanning method for real-time full-range Fourier domain optical coherence tomography

High-speed complex full-range Fourier domain optical coherence tomography (FD-OCT) is demonstrated. In this FD-OCT, the phase modulation of a reference beam (M scan) and transversal scanning (B scan) are simultaneously performed. The Fourier transform method is applied along the direction of the B scan to reconstruct complex spectra, and the complex spectra comprise a full-range OCT image. Because of this simultaneous B-M-mode scan, the FD-OCT requires only a single A scan for each single transversal position to obtain a full-range FD-OCT image. A simple but slow version of the FD-OCT visualizes the cross section of a plastic plate. A modified fast version of this FD-OCT investigates a sweat duct in a finger pad in vivo and visualizes it with an acquisition time of 27 ms.     

Spring bloom in a hypereutrophic lake, lake Kasumigaura, Japan—II Succession of phytoplankton species

Numerous phytoplankton species in Lake Kasumigaura were shown to comprise the Spring bloom in 1980. The predominant phytoplankton species that appeared during the Spring bloom belonged to 28 genera. A few species among them increased at any time to form a phytoplankton pulse, but the few species of phytoplankters that comprised a phytoplankton pulse did not exclude completely other phytoplankters. During the Spring bloom, one pulse was replaced by another pulse composed of a new grouping of different species. Throughout these replacements by natural selection in the bloom were numerous other species by phytoplankters at levels of abundance somewhat less than those which formed phytoplankton pulse.