Synthesis of chemically modified chitosans with a higher fatty acid glycidyl and their adsorption abilities for anionic and cationic dyes

Novel chitosan‐based materials with a higher fatty acid glycidyl as the chemically modified agent were synthesized and the adsorption ability of the resulting polymers has been evaluated for typical anionic and cationic dyes. The successful modification was confirmed by the infrared spectroscopic measurements. As the degree of substitution was decreased, the adsorption ability of the chemically modified chitosans for anionic dyes at the higher dye concentration was increased, and the modified chitosans with a lower degree of substitution showed a higher adsorption ability than that of an activated carbon at the higher dye concentration. For cationic dyes, the chemically modified chitosan showed a good adsorption power, especially when the adsorption power was evaluated by the flow methods. The improved adsorption ability of a chemically modified chitosan material was also confirmed by comparing it with that of a crosslinked chitosan material. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2423–2428, 2005     

Uncertainty quantification via bayesian inference using sequential monte carlo methods for CO2 adsorption process

This work presents the uncertainty quantification, which includes parametric inference along with uncertainty propagation, for CO₂ adsorption in a hollow fiber sorbent, a complex dynamic chemical process. Parametric inference via Bayesian approach is performed using Sequential Monte Carlo, a completely parallel algorithm, and the predictions are obtained by propagating the posterior distribution through the model. The presence of residual variability in the observed data and model inadequacy often present a significant challenge in performing the parametric inference. In this work, residual variability in the observed data is handled by three different approaches: (a) by performing inference with isolated data sets, (b) by increasing the uncertainty in model parameters, and finally, (c) by using a model discrepancy term to account for the uncertainty. The pros and cons of each of the three approaches are illustrated along with the predicted distributions of CO₂ breakthrough capacity for a scaled‐up process. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3352–3368, 2016     

Identification and Characterization of D‐Succinylase,and a Proposed Enzymatic Method for D‐Amino Acid Synthesis

Chiral amino acids are important intermediates for the pharmaceutical industry. We have developed a novel one‐pot enzymatic method for D ‐amino acid synthesis by the dynamic kinetic resolution of N‐succinyl‐dl ‐amino acids using D ‐succinylase (DSA) and N‐succinylamino acid racemase (NSAR, EC 4.2.1.113). The DSA from Cupriavidus sp. P4‐10‐C, which hydrolyzes N‐succinyl‐D ‐amino acids enantioselectively to their corresponding D ‐amino acids, was identified for the first time by screening soil microorganisms. Subsequently, the DSA gene was cloned and overexpressed in Escherichia coli. DSA was shown to comprise two subunits with molecular masses of 26 kDa and 60 kDa. Additionally, the NSAR gene from Geobacillus stearothermphilus NCA1503, which racemizes N‐succinylamino acids, was also cloned and overexpressed in E. coli. The highly purified DSA and NSAR prepared from each recombinant E. coli were characterized and used for D ‐amino acid synthesis. A one‐pot enzymatic method converted 100 mM N‐succinyl‐dl ‐phenylalanine to D ‐phenylalanine in 91.1% conversion with 86.7% ee. This novel enzymatic method may be useful for the industrial production of many D ‐amino acids.

     

Freestanding HfO2 grating fabricated by fast atom beam etching

We report here the fabrication of freestanding HfO2 grating by combining fast atom beam etching (FAB) of HfO2 film with dry etching of silicon substrate. HfO2 film is deposited onto silicon substrate by electron beam evaporator. The grating patterns are then defined by electron beam lithography and transferred to HfO2 film by FAB etching. The silicon substrate beneath the HfO2 grating region is removed to make the HfO2 grating suspend in space. Period- and polarization-dependent optical responses of fabricated HfO2 gratings are experimentally characterized in the reflectance measurements. The simple process is feasible for fabricating freestanding HfO2 grating that is a potential candidate for single layer dielectric reflector.PACS: 73.40.Ty; 42.70.Qs; 81.65.Cf.     

粒子网格混合方法模拟液滴夹带起始点

环状流动的特性对反应堆事故工况分析具有重要意义,本研究基于粒子网格混合方法对这一现象中的液滴夹带起始点问题进行了数值分析,利用网格求解流场,利用粒子模拟液膜及液滴的运动,探讨了气水流动大密度比情况下,不同流动方向,不同流体粘度,不同液膜厚度下的液滴夹带所需的临界气相流速,结果同经典关系式进行了对比,吻合良好．这一方法对于反应堆事故中的两相流动研究具有参考意义．     

Chemical‐Free Approach for Z‐Isomerization of Lycopene in Tomato Powder: Hot Air and Superheated Steam Heating above the Melting Point of Lycopene

Z‐isomers of lycopene exhibit higher bioavailability and antioxidant capacity than those of the all‐E‐isomer. Therefore, it is important to develop an efficient and environmentally friendly procedure for Z‐isomerization. The current methods for Z‐isomerization of (all‐E)‐lycopene use toxic chemicals such as organic solvents and catalysts. This study is aimed to develop a chemical‐free method for Z‐isomerization of (all‐E)‐lycopene in tomato powder by hot air and superheated steam heating. The Z‐isomerization reaction is promoted by heating above the melting point of lycopene. When heated with superheated steam, the thermal decomposition of lycopene is suppressed compared to that when heated with hot air. When tomato powder is heated at 240 °C for 5 min by superheated steam, the total Z‐isomer content and remaining lycopene are 69.0% and 90.7%, respectively, while with hot air heating, the total Z‐isomer content and remaining lycopene are 69.9% and 68.0%, respectively. These results indicate that the thermal Z‐isomerization of lycopene occurs in the molten state and heating in a low oxygen atmosphere suppresses the thermal decomposition of lycopene. Practical Applications: Tomato powder rich in lycopene Z‐isomers is an important ingredient for the food and animal feed industries. Since Z‐isomers of lycopene are more soluble in solvents including ethanol which is a low‐toxicity and environmentally friendly solvent, the efficiency of lycopene extraction with ethanol can be improved by using the Z‐isomer‐rich tomato powder as a raw material. The obtained Z‐isomer‐rich extract has a high added value because the Z‐isomers have higher bioavailability and antioxidant capacity than those of the all‐E‐isomer. In addition, since lycopene Z‐isomers exhibit higher accumulation efficiency and better color improvement in hen egg yolks than those of the all‐E‐isomer, Z‐isomer‐rich tomato powder is an effective animal feed.     

Size-dependent separation of graphene oxide by deformation of packed-gel in a chromatographic column

ABSTRACT

A deformable gel-packed chromatographic column was used to separate as-synthesized graphite oxide with different sizes. The synthesized gel (56 µm) was deformed by pressure of the fluid flow and the gaps in the gels showed a range of sizes. A suspension of graphene oxide (0.1 g/L, 10 mL) was injected, and graphene oxide in the elution had a size at 0.56 μm and 0.14 μm, whereas in half upper and bottom domain of the gel layer graphene oxide had a size at 33 µm and 2.9 µm, respectively, demonstrating that graphene oxide suspension was separated by size through gel layer.     

Molecular simulation and experimental studies of the miscibility of polylactic acid/polyethylene glycol blends

Computer simulation and experiments were performed to investigate the miscibility of PLA/PEG blends with different PEG concentrations. Flory-Huggins interaction (χ) parameter used to predict the miscibility for the blends was estimated by molecular dynamic simulation of fully atomistic model. The calculated χ parameter and radial distribution function suggest that the PLA and PEG blends are likely miscible at low PEG concentrations (10–30 wt%), but they become apparently immiscible at higher PEG content (>50 wt%). This result is consistent with density distribution of PLA and PEG beads calculated from dissipative particle dynamics simulation of coarse-grained model. To support the computational results, experiments based on differential scanning calorimetry (DSC) and rheometry were also performed. The DSC thermograms of 90:10, 80:20, and 70:30 (wt/wt) of PLA/PEG blends showed a single glass transition and PLA melting peak, indicating PLA/PEG is miscible over this composition. In rheometry, frequency (ω) dependence of storage moduli (G′) at low frequencies for 75:25 and 70:30 blends indicate that these samples are near the phase separation point.     

Fracture Energy of an Aligned Porous Silicon Nitride

The fracture energy of a porous silicon nitride with aligned fibrous grains was investigated, using a chevron-notched-beam technique. A crack was constrained to propagate normal to the grain alignment. The obtained fracture energy was ∼500 J/m², which was ∼7 times larger than that of a dense silicon nitride with randomly oriented fibrous grains. The large fracture energy was attributable primarily to the sliding resistance associated with interlocking grains.