Analysis of Mg content of Zn_(1-x)Mg_xO film grown on sapphire substrates by plasma-assisted molecular beam epitaxy

Semiconductor materials with wide band gap have been extensively used to fabri-cate the blue laser light emitting diodes and ultraviolet photodetectors, which are impor-tant elements of semiconductor instruments, such as displays, optical data storages, ul-traviolet sensors, electroluminescent devices and solar-blind detectors. This kind of ma-terials is now becoming a hot research object in semiconductor physics. GaN was the first suitable ultraviolet laser material people found in this real…     

A Study of the Effect of Aluminium on the Mechanochemical Reduction of Hematite by Graphite

The effect of addition of small amounts of aluminium on mechano‐chemical reduction of hematite by graphite was studied. Various amounts of aluminium (0 to 10%) were added to a hematite‐graphite mixture, in which C/O ratio was 1:1. The hematite‐graphite‐aluminium mixtures were then subjected to ball milling followed by heating up reduction. The heating up reduction was carried out in Ar atmosphere, using TG‐DTA device. In TG‐DTA experiments, samples were heated by a constant heating rate of 10 °C/min from room temperature up to 1100 °C and maintained for 30 minutes at this temperature. To clarify the reactions which took place during milling and heating up reduction, the samples were subjected to XRD examinations. It was found that the heat generated during exothermic reaction of aluminothermic reduction of hematite promoted the endothermic reaction of carbothermic reduction. In the course of heating up reduction, the carbothermic reaction occurred just after aluminothermic reaction. Increasing of aluminum content from 0 to 10% in 2 hours ball milled samples decreased the temperature of carbothermic reaction from 1020 °C to about 860 °C. The further ball milling of the samples up to 5 and 10 hours, for the samples containing 10 and 5% aluminium respectively, caused the decrease of the temperature of aluminothermic and carbothermic reactions to around the melting point of aluminium.     

Three-dimensional rainbow schlieren measurements in underexpanded sonic jets from axisymmetric convergent nozzles

The rainbow schlieren deflectometry has been combined with the computed tomography to obtain three-dimensional density fields of shock containing free jets and we call the method the schlieren CT. Experiments on the schlieren CT have been performed at a nozzle pressure ratio of 4.0 by using an axisymmetric convergent nozzle with an inner diameter of 10 mm at the exit where the nozzle was operated at an underexpanded condition. Multidirectional rainbow schlieren pictures of an underexpanded sonic jet can be acquired by rotating the nozzle about its longitudinal axis in equal angular intervals and the three-dimensional density fields are reconstructed by the schlieren CT. The validity of the schlieren CT is verified by a comparison with the density fields reconstructed by the Abel inversion method. As a result, it is found that excellent quantitative agreement is reached between the three-dimensional jet density fields reconstructed from both methods.     

Modeling of Nonlinear Magnetizing Characteristics of Pole Transformer for Analyzing Islanding Prevention of Photovoltaic System

With increasing penetration of distributed generators such as photovoltaic (PV) systems in distribution systems, it is very important to quickly detect islanding caused by power system faults in order to assure electrical safety. We have developed a nonlinear magnetizing characteristics model of pole transformers for use in analyzing islanding prevention in PV systems. Basic experiments on the islanding detection were performed for verification of the proposed model. Analytical results obtained by the proposed model agreed well with experimental results.     

Thermoelectric Properties of Rare Earth-Doped SrTiO3 Nanocubes

A giant Seebeck coefficient of ?890 μV/K at 500 °C has been observed in Y_0.2Sr_0.8TiO₃ prepared using nanocubes. Doping rare earth elements, RE, has revealed that small RE is effective to enhance the Seebeck coefficient. Through soft mode observations by Raman spectroscopy and structural calculations based on density functional theory, it has been found that the breakdown of inversion symmetry of the perovskite structure near the surface of nanocubes can be recovered by doping with small RE. Because the dielectric constant is strongly related to the surface structure in this compound, we suggest that RE doping modulates the potential barrier at the grain boundary, resulting in a pronounced energy filtering effect in Y doped SrTiO₃.     

Dummy humanoid robot simulating several trunk postures and abdominal shapes – Report of element technologies

Development of clothing in consideration of the shape and body function of a person with spinal cord injury is an important task. Then, a dummy robot with a deformation mechanism was developed in this study for evaluating the comfortable level of clothings. Specifically, a trunk joint mechanism and an abdominal mechanism that can realize various deformations of the abdominal area and various trunk poses were developed. The trunk joint mechanism was implemented in order to simulate the seated posture of persons with spinal cord injury. The abdominal deformation mechanism was implemented using linear actuators and rotating servomotors in order to simulate abdominal obesity of persons with spinal cord injury. Further, a tactile sensor system was developed for measuring the clothing pressure on the abdominal area and evaluating the comfort or discomfort of clothing.     

Development of silicon wafer packaging technology for deep UV LED

This paper reports a deep‐ultraviolet LED (deep‐UV‐LED) package based on silicon MEMS process technology (Si‐PKG). The package consists of a cavity formed by silicon crystalline anisotropic etching, through‐silicon vias (TSVs) filled with electroplated Cu, bonding metals made of electroplated Ni/AuSn and a quartz lid for hermetic sealing. A deep‐UV LED die is directly mounted in the Si‐PKG by AuSn eutectic bonding without a submount. It has advantages in terms of size, heat dissipation, light utilization efficiency, productivity and cost over conventional AlN ceramic packages. We confirmed a light output of 30 mW and effective reflection on Si (111) cavity slopes in the Si‐PKG. Based on simulation, further improvement of the optical output is expected by optimizing DUV‐LED die mount condition.