Effect of Powder Injection on the Interfacial Fracture Toughness of Plasma-Sprayed Zirconia

Adhesive strength of the plasma-sprayed thermal barrier coating is one of the most important parameters which influence their durability and reliability during service. While many methods exist to measure the adhesive strength, in general, they require cumbersome and time-consuming specimen preparation. Furthermore, considerations of the adhesion strength from the point-of-view of fracture toughness or for that matter, their systematic correlation to both processing variances are limited. Consequently, there is an opportunity to both simplify the measurement procedure and establish correlations among methods and linkages between processing parameters and interfacial fracture toughness. In this paper, we report results on adhesion strength of plasma-sprayed yttria-stabilized zirconia (YSZ) coating on aluminum substrates based on both interfacial indentation test (to measure interfacial fracture toughness) and the modified tensile adhesive test. Carrier gas flow for powder injection into the plasma torch was systematically varied to introduce variances in particle melting with concomitant impact on the measured adhesive strength. The results indicate the correlation between the particle melting index and the measured interfacial fracture toughness.     

Morphology development and exclusion of noncrystalline polymer during crystallization in PVDF/PMMA blends

Morphology development during the crystallization of poly(vinylidene fluoride) (PVDF)/poly(methyl methacrylate) (PMMA) blends was investigated at various crystallization temperatures (T_C) by means of time-resolved light scattering measurements and atomic force microscopy (AFM). A coarse spherulite obtained at a high T_C of 162 °C was found to be developed with a two-step crystallization process. The ordering in the spherulites (Pr) increased with time at the early stages and then decreased at the later stages. The rate of spherulite growth started to decrease when Pr started to decrease. In contrast, in the compact spherulite obtained at a low T_C of 148 °C, Pr decreased monotonously with time while the growth rate was constant. AFM observation revealed that such characteristic crystallization behavior is attributed to the exclusion of PMMA from the crystal growth during the crystallization; i.e., the amount of excluded PMMA becomes larger as the distance from the spherulite center increases and the crystallization temperature rises.     

Regulation of Neutrophil Functions by Hv1/VSOP Voltage-Gated Proton Channels

The voltage-gated proton channel, Hv1, also termed VSOP, was discovered in 2006. It has long been suggested that proton transport through voltage-gated proton channels regulate reactive oxygen species (ROS) production in phagocytes by counteracting the charge imbalance caused by the activation of NADPH oxidase. Discovery of Hv1/VSOP not only confirmed this process in phagocytes, but also led to the elucidation of novel functions in phagocytes. The compensation of charge by Hv1/VSOP sustains ROS production and is also crucial for promoting Ca²⁺ influx at the plasma membrane. In addition, proton extrusion into neutrophil phagosomes by Hv1/VSOP is necessary to maintain neutral phagosomal pH for the effective killing of bacteria. Contrary to the function of Hv1/VSOP as a positive regulator for ROS generation, it has been revealed that Hv1/VSOP also acts to inhibit ROS production in neutrophils. Hv1/VSOP inhibits hypochlorous acid production by regulating degranulation, leading to reduced inflammation upon fungal infection, and suppresses the activation of extracellular signal-regulated kinase (ERK) signaling by inhibiting ROS production. Thus, Hv1/VSOP is a two-way player regulating ROS production. Here, we review the functions of Hv1/VSOP in neutrophils and discuss future perspectives.     

Quantitative risk assessment of noroviruses in drinking water based on qualitative data in Japan

Noroviruses are one of the major causes of viral gastroenteritis in Japan. A quantitative risk assessment was conducted to evaluate the health risk caused by this virus in drinking water. A Monte Carlo analysis was used to calculate both the probability of infection and the disease burden using disability-adjusted life years (DALYs). The concentration of noroviruses in tap water was estimated based on qualitative data and a most probable number (MPN) method with an assumed Poisson lognormal distribution. This numerical method was evaluated using two sets of available count data of Cryptosporidium: that collected from a river and that found in tap water in Japan. The dose-response relationships for noroviruses were estimated using assumed ID50 (10 or 100). The annual risk was higher than the US-EPA acceptable level (10(-4) [infection/ person-year]) but around the WHO level (10(-6) [DALYs/ person-year]). As suggested by others, since microbial concentrations are generally lognormally distributed, the arithmetic mean was directly related to the annual risk, suggesting that the arithmetic mean is more useful in representing the degree of microbial contamination than the geometric mean.     

Biochip with integrated pumps for plug-based sequential exchange of solutions

A novel method for exchanging solutions used in biochemical analyses and a device to carry out the exchange are proposed. An array of plugs formed using six injectors was transported in a microflow channel using a main pump located at one end of the main flow channel. The injectors and main pump were operated on the basis of the change in volume caused by the electrolysis of water. Bubbles were produced from working electrodes; these bubbles caused a diaphragm placed below the injectors to inflate and occlude the inlet of the solution reservoir. Increase in the number of bubbles caused the reservoir to inject the solution into the main flow channel in the form of a plug. Each plug was individually transported downstream to the sensing area by the main pump, which was operated in a similar manner to the injector. The device was used for the detection of a tumor marker, α-fetoprotein (AFP). Plugs of necessary solutions were individually transported to the sensing area with immobilized primary antibodies to allow antigen–antibody binding, cleaning, and detection. The fluorescence intensity from the antibodies showed clear dependence on the concentration of AFP. The immobilization of antibodies could also be carried out on-chip.     

Color‐conversion method for a multi‐primary display to reduce power consumption and conversion time

Abstract— A color‐conversion method for a light‐emitting multi‐primary‐color display is proposed. While amulti‐primary‐color display uses four or more primary colors to reproduce a wide color gamut, multiple sets of primary‐color signals are needed to reproduce one color. Therefore, linear programming, which results in low power consumption, was adopted to uniquely determine the set of primary‐color signals. Although a highly accurate color conversion was achieved by using linear programming with low power consumption, it requires a very long time to convert colors of high‐resolution images. Therefore, by categorizing the color conversion of linear programming as a classification problem, colors are converted by using the decision‐tree method, which is a classification method. As a result, color conversion with high accuracy, low power consumption, and short conversion time was achieved.     

电动汽车稳定性控制中的车体侧偏角观测器研究

采用轮毂电机独立驱动的电动汽车可采用直接横摆力矩控制(Direct Yaw-moment Control,DYC)等稳定性控制,而车体侧偏角(简称β角)是稳定性控制中的重要参数.直接测定车体侧偏角的传感器相当昂贵,所以需要从能够容易测得的参数来进行车体侧偏角的推测.Hori研究室设计了一种用于β角推测的观测器,并充分考虑了车辆运行工况变化所引起的系统模型参数变化,进行了观测器鲁棒性设计以及轮胎侧偏刚度在线辨识,使观测器具备了足够的鲁棒性来克服大的模型误差影响,试验结果证明了该观测器的有效性.     

On phenomenological failure criteria for composite bolted joint analysis

There has been a recent trend to use phenomenological strength models in combination with point stress or average stress failure criteria to form strength models for the analysis of composite bolted joints. Several papers published using these approaches have demonstrated practical reductions in the size of the empirical data base required to perform bolted joint analysis for specific materials and laminates. Since the inception of phenomenological failure models for bolted joints several refinements have been proposed, but the generality of the method is not clearly defined. This paper addresses the concepts underlying the formulation of these strength models, compares the capabilities of several commonly used failure criteria and discusses the limits of applicability through example analyses and comparison with experimental data. The results indicate that differences in predicted strengths for the models examined were insignificant. Failure mode predictions based on single point failure location information varied from model to model and differed significantly from experimentally observed failure modes for some geometries. The models cannot be applied with confidence for the analysis of a wide class of laminates and geometries without calibrating the model through empirical data.     

Sesamin is a potent and specific inhibitor of Δ5 desaturase in polyunsaturated fatty acid biosynthesis

Incubation with sesame oil increases the mycelial dihomo-γ-linolenic acid content of an arachidonic acid-producing fungus,Mortierella alpina, but decreases its arachidonic acid content [Shimizu, S., K. Akimoto, H. Kawashima, Y. Shinmen and H. Yamada (1989)J. Am. Oil Chem. Soc. 66, 237–241]. The factor causing these effects was isolated and identified to be (+)-sesamin. The results obtained in experiments with both a cell-free extract of the fungus and with rat liver microsomes demonstrated that (+)-sesamin specifically inhibits Δ5 desaturase at low concentrations, but does not inhibit Δ6, Δ9 and Δ12 desaturases. Kinetic analysis showed that (+)-sesamin is a noncompetitive inhibitor (K_i for rat liver Δ5 desaturase, 155 μM). (+)-Sesamolin, (+)-sesaminol and (+)-episesamin, also inhibited only Δ5 desaturases of the fungus and liver. These results demonstrate that (+)-sesamin and related lignan compounds present in sesame seeds or its oil are specific inhibitors of Δ5 desaturase in polyunsaturated fatty acid biosynthesis in both microorganisms and animals. On leave from Suntory Ltd.