Characteristics of a-Si solar cells prepared by the super chamber at a high substrate temperature

A new approach to high-performance a-Si solar cells was studied. a-Si films prepared at a high substrate temperature (> 250°C) have a higher absorption coefficient and a low Si H₂ bond density. the effect of deposition temperature on the open-circuit voltage (V_oc) has been investigated systematically for glass/SnO2 Ipin/metal and glass/metal/nip/indium tin oxide (ITO) structure a-Si solar cells. The V_oc is found to depend strongly on the thermal history of the p/i interface. A short-circuit current of 19.5 mA/cm⁻⁻² was achieved for an a-Si solar cell using an a-Si i-layer with a thickness of 4000 Å, which was prepared at a substrate temperature of 270°C.     

Chain matching between hydrocarbon and fatty acid as interfacial phenomena

According to the investigations of Cameron and his coworkers^1–5 into the chain-matching phenomena between normal paraffin as a solvent and straight-chain fatty acid as an additive, the optimum condition in boundary lubrication is attained when the chain lengths of the additive and solvent are equal. A series of experiments has been conducted over the past ten years on the role of the chain-matching effect, not only on boundary lubrication but also widely on relevant interfacial phenomena. The results of the investigations are discussed.     

Biochip with integrated pumps for plug-based sequential exchange of solutions

A novel method for exchanging solutions used in biochemical analyses and a device to carry out the exchange are proposed. An array of plugs formed using six injectors was transported in a microflow channel using a main pump located at one end of the main flow channel. The injectors and main pump were operated on the basis of the change in volume caused by the electrolysis of water. Bubbles were produced from working electrodes; these bubbles caused a diaphragm placed below the injectors to inflate and occlude the inlet of the solution reservoir. Increase in the number of bubbles caused the reservoir to inject the solution into the main flow channel in the form of a plug. Each plug was individually transported downstream to the sensing area by the main pump, which was operated in a similar manner to the injector. The device was used for the detection of a tumor marker, α-fetoprotein (AFP). Plugs of necessary solutions were individually transported to the sensing area with immobilized primary antibodies to allow antigen–antibody binding, cleaning, and detection. The fluorescence intensity from the antibodies showed clear dependence on the concentration of AFP. The immobilization of antibodies could also be carried out on-chip.     

Optical on-line running reconstruction of MR-images in the phase-scrambling Fourier-imaging technique

Recently, the use of magnetic-resonance-guided navigation to improve the safety and effectiveness of surgical procedures has shown great promise. The purpose of the present study was to develop and demonstrate an imaging strategy that allows surgeons to continue operating without delays caused by imaging. The phase-scrambling Fourier-imaging technique has two prominent characteristics: localized image reconstruction and holographic image reconstruction. The combination of these characteristics allows images to be observed even during the data-acquisition period, because the acquired signal is converted into a hologram and the image is reconstructed instantly in the coherent optical image-processing system. Experimental studies have shown that the phase-scrambling Fourier-imaging technique enables the motion of objects to be imaged more quickly than the standard fast imaging. The proposed running reconstruction strategy can be easily implemented in the well-established magnetic-resonance imaging equipment that is currently in use.     

Color‐conversion method for a multi‐primary display to reduce power consumption and conversion time

Abstract— A color‐conversion method for a light‐emitting multi‐primary‐color display is proposed. While amulti‐primary‐color display uses four or more primary colors to reproduce a wide color gamut, multiple sets of primary‐color signals are needed to reproduce one color. Therefore, linear programming, which results in low power consumption, was adopted to uniquely determine the set of primary‐color signals. Although a highly accurate color conversion was achieved by using linear programming with low power consumption, it requires a very long time to convert colors of high‐resolution images. Therefore, by categorizing the color conversion of linear programming as a classification problem, colors are converted by using the decision‐tree method, which is a classification method. As a result, color conversion with high accuracy, low power consumption, and short conversion time was achieved.     

电动汽车稳定性控制中的车体侧偏角观测器研究

采用轮毂电机独立驱动的电动汽车可采用直接横摆力矩控制(Direct Yaw-moment Control,DYC)等稳定性控制,而车体侧偏角(简称β角)是稳定性控制中的重要参数.直接测定车体侧偏角的传感器相当昂贵,所以需要从能够容易测得的参数来进行车体侧偏角的推测.Hori研究室设计了一种用于β角推测的观测器,并充分考虑了车辆运行工况变化所引起的系统模型参数变化,进行了观测器鲁棒性设计以及轮胎侧偏刚度在线辨识,使观测器具备了足够的鲁棒性来克服大的模型误差影响,试验结果证明了该观测器的有效性.     

Surface acoustic wave based sensors employing ionic liquid for hydrogen sulfide gas detection

This paper describes a new type hydrogen sulfide (H₂S) gas sensor using ionic liquid (IL). In this sensor, a reservoir for the IL was integrated on a surface acoustic wave (SAW) resonator. The IL serves as an absorber for H₂S gas. Mass change due to this absorption is detected as shift in the resonant frequency. In this study, we fabricated and demonstrated the sensor using the lithium niobate (LiNbO₃) SAW resonator with the resonant frequency of 38 MHz. The integrated reservoir was filled by the IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]-[PF₆]). As an experimental result, we observed the linear correlation between the frequency-shift and the exposure time of the sensor to the H₂S gas.     

Performance of non-destructive evaluation by diffracted SH ultrasonic waves in predicting degree of fatigue in cyclic bending of ferritic steel

The degree of fatigue in ferritic wrought steel during cyclic bending was determined by analysis of diffracted SH ultrasonic waves with the aid of multiple regression analysis. As the degree of fatigue increases, accompanied by residual stress, the incident waves curve to the interior region with positive stress field owing to the acoustoelastic effect. As a result, the propagation time of the launched waves lengthens, leading to a modulation of the received waveform. Multiple regression analysis for the waveform modulation produces a reliable estimation, with correlation coefficient of 0.948, for the degree of fatigue.