The Use of a Population Balance Model in the Study of Inoculation of Soybean Seeds in a Spouted Bed

The coating of soybean seeds with bacteria and micronutrients favours the vigorous growth of the plant, dispensing with the use of ammoniacal fertilizers. The optimum thickness of the coating should allow the fundamental gaseous interchanges for the germination and the ideal conditions for the activity of the bacteria. The objective of this work was to simulate dynamic mass distribution of soybean seeds covered with bacteria and macronutrients in spouted bed through a specific program developed in Maple V^®. The validation of the model is done through 16 experiments carried out in a spouted bed with spray at the top.     

A super-dynamic flip-flop circuit for broad-band applications up to24 Gb/s utilizing production-level 0.2-μm GaAs MESFETs

This paper describes a novel dynamic flip-flop (FF) circuit that can operate 30% faster than conventional clocked inverter-type FFs. A new wideband clock buffer is introduced to cover the FF operation range. An 8- to 24-Gb/s decision circuit and a 9- to 26-GHz 1/2 frequency divider were developed utilizing production-level 0.2-μm GaAs MESFET technology     

Fabrication of nanograined silicon by high-pressure torsion

This paper describes fabrication of Si nanograins through allotropic phase transformation by concurrent application of high pressure and intense straining using high-pressure torsion (HPT). Single-crystalline Si(100) wafers were processed by HPT under a pressure of 24 GPa at room temperature. X-ray diffraction and Raman analysis revealed that the HPT-processed samples were composed of metastable Si-III and Si-XII phases and amorphous phases in addition to the original diamond-cubic Si-I phase. It was found that nanograins formed because the Si-I diamond phase had transformed to high-pressure phases (Si-II, Si-XI, and Si-V) having metallic nature, and it then became easier to generate a high density of dislocations to form grain boundaries. The high-pressure phases were further transformed to the Si-XII and Si-III phases via the Si-II phase upon unloading and they existed as metastable phases at ambient pressure. Subsequent annealing at 873 K gave rise to reverse transformation to Si-I but with nanograin sizes. Although no appreciable photoluminescence (PL) peak was observed from the HPT-processed sample, a broad PL peak centered around 600 nm was detected from the annealed sample due to quantum confinement in the Si-I nanograins.     

Numerical investigation of flow in a channel obstructed by an array of square rods (2nd report,Investigation of a criterion for judging the uniqueness and validity of numerical results)

Two‐dimensional numerical computation is performed for unsteady laminar flow. Spatially periodic boundary conditions are adopted in the streamwise direction, and in particular, a criterion for judging the uniqueness of the numerical solution is studied. The following results were obtained. When the numerical result fluctuates with the computational domain size, various low‐frequency components are markedly observed in the streamwise velocity of the calculated result. Compared with the channel flow obstructed by a single rod of the same size, the intensities of velocity fluctuation in this study are relatively high, and their distribution throughout the flow field is rather uniform. The spatially averaged kinematic energy of the velocity fluctuation is adopted as a key parameter, and a discrimination map of the uniqueness of the numerical solution is presented using a timescale ratio between mean flow and velocity fluctuation, the rod pitch, and the blockage ratio. The timescale ratio is well correlated with a geometric parameter obtained from the flow configuration, and the discrimination map can be converted such that the geometric parameter and the channel Reynolds number describe it. © 2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(3): 113–126, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20152     

Node pacing for small optical RAM-buffered packet-switching networks

One of the difficulties with optical packet switched (OPS) networks is buffering optical packets in the network. The only available solution that can currently be used for buffering in the optical domain is using long fiber lines called fiber delay lines (FDLs), which have severe limitations. Moreover, the research on optical RAM presently being done is not expected to achieve a large capacity soon. However, the burstiness of Internet traffic causes high packet drop rates and low utilization in very small buffered OPS networks. We therefore propose a new node-based pacing algorithm for decreasing burstiness. We show that by applying some simple pacing at the edge or core backbone nodes, the performance of very small optical RAM buffered core OPS networks with variable-length packets can be notably increased.     

A QoS-aware routing mechanism for multi-channel multi-interface ad-hoc networks

To accommodate real-time multimedia application while satisfying application QoS requirements in a wireless ad-hoc network, we need QoS control mechanisms. In this paper, we propose a new routing mechanism to support real-time multimedia communication by efficiently utilize the limited wireless network capacity. Our mechanism considers a wireless ad-hoc network composed of nodes equipped with multiple network interfaces to each of which a different wireless channel can be assigned. By embedding information about channel usage in control messages of OLSRv2, each node obtains a view of topology and bandwidth information of the whole network. Based on the obtained information, a source node determines a logical path with the maximum available bandwidth to satisfy application QoS requirements. Through simulation experiments, we confirmed that our proposal effectively routed multimedia packets over a logical path avoiding congested links. As a result, the load on a network is well distributed and the network can accommodate more sessions than QOLSR. We also conducted practical experiments using wireless ad-hoc relay nodes with four network interfaces and verified the practicality of our proposal.     

High-performance antireflective coatings with a porous nanoparticle layer for visible wavelengths

Ghosts and flares are well-known problems that are caused by reflections from lens surfaces when we take photographs. It is more difficult to prevent such stray light in a digital camera than in a film camera because of high reflectance from the low-pass filter and diffraction from the image sensor. To prevent such stray light, we introduce an ultralow refractive index layer into the antireflective (AR) coatings. We used the solgel method to form porous fluoride layers with ultralow refractive indices, and we succeeded in developing a unique process to form AR coatings with superior performance.     

Respiration-deficient mutants of Zymomonas mobilis show improved growth and ethanol fermentation under aerobic and high temperature conditions

Respiration-deficient mutant (RDM) strains of Zymomonas mobilis were isolated from antibiotic-resistant mutants. These RDM strains showed various degrees of respiratory deficiency. All RDM strains exhibited much higher ethanol fermentation capacity than the wild-type strain under aerobic conditions. The strains also gained thermotolerance and exhibited greater ethanol production at high temperature (39°C), under both non-aerobic and aerobic conditions, compared with the wild-type strain. Microarray and subsequent quantitative PCR analyses suggest that enhanced gene expression involved in the metabolism of glucose to ethanol resulted in the high ethanol production of RDM strains under aerobic growth conditions. Reduction of intracellular oxidative stress may also result in improved ethanol fermentation by RDM strains at high temperatures.     

INTERACTION BETWEEN PRESSURE DROP OF GAS AND FLOW OF MEDIUM IN A MOVING GRANULAR BED FILTER

Gradually increasing pressure drop, which ultimately leads to a rapid increase, is a problem encountered in moving granular bed filters when gas velocity is elevated during dust collection from the top gas of a blast furnace. The relationship between dust collection and pressure drop was mathematically simulated, and then a half-size test model moving granular bed filter was used to examine the conditions under which the medium can flow. The increase in gas pressure drop proceeds as a circular chain of interrelated events. When gas velocity is increased and the gas pressure gradient exceeds a certain critical value, the medium flow stalls along the gas discharge side of the bed. Dust accumulates in the stalled medium, raising the pressure gradient even further. The growth in pressure drop is thus accelerated, finally resulting in a rapid and undesirable increase that prevents further operation.