Biochemical and genetic characterization of 2-carboxybenzaldehyde dehydrogenase, an enzyme involved in phenanthrene degradation by Nocardioides sp. strain KP7

2-Carboxybenzaldehyde dehydrogenase from the phenanthrene-degrading bacterium Nocardioides sp. strain KP7 was purified and characterized. The purified enzyme had a molecular mass of 53 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and 205 kDa by gel filtration chromatography. Thus, the homotetramer of the 53-kDa subunit constituted an active enzyme. The apparent Km and kcat values of this enzyme for 2-carboxybenzaldehyde were 100 microM and 39 s(-1), respectively, and those for NAD+ were 83 microM and 32 s(-1), respectively. The structural gene for this enzyme was cloned and sequenced. The length of the gene was 1,455 bp. The nucleotide sequence of the 10,279 bp of DNA around the gene for 2-carboxybenzaldehyde dehydrogenase was also determined, and seven open reading frames were found in this DNA region. These were the genes for 1-hydroxy-2-naphthoate dioxygenase (phdI) and trans-2'-carboxybenzalpyruvate aldolase (phdJ), orf1, the gene for 2-carboxybenzaldehyde dehydrogenase (phdK), orf2/orf3, and orf4. The amino acid sequence of the orf1 product was similar to that of the aromatic hydrocarbon transporter gene (pcaK) in Pseudomonas putida PRS2000. The amino acid sequence of the orf4 product revealed a similarity to cytochrome P-450 proteins. The region between phdK and orf4 encoded orf2 and orf3 on different strands. The amino acid sequences of the orf2 and orf3 products exhibited no significant similarity to the reported sequences in protein databases.     

Analytical study on elimination of severe recriticalities in large scale LMFBRS with enhancement of fuel discharge

The possibility of severe recriticality could be excluded if the molten core materials are discharged from reactor core in the early stage of core disruptive accident (CDA). Based on this idea, several design measures for future commercial liquid metal-cooled fast breeder reactors (LMFBRs) have been proposed to enhance the molten fuel discharge from core in order to prevent formation of the core-wide molten pool with high mobility. One promising concept in these design candidates is modified-FAIDUS (Fuel subassembly with Inner DUct Structure). The event progression in unprotected loss of flow (ULOF) accident in a sodium-cooled large scale FBR with modified-FAIDUS was analyzed to assess the effectual performance of modified-FAIDUS in preventing severe recriticality using the SAS4A and SIMMER-III codes. Two parametric cases were performed covering the uncertainty of duct wall failure mechanism, one with stable fuel crust and another with unstable crust condition. The calculation showed that the final amount of discharged fuel from core in both cases was more than 20% of initial core inventory. The degraded core after fuel discharge is composed of the mixture of solidified fuel, swollen fuel chunks and molten steel, of which low mobility prevents massive fuel motion. The reactor power lowered to decay heat level and the reactivity lowered around −20 $, thus, the possibility of severe recriticality was eliminated.     

Temperature control for the expansion of artificial DNA motif

The DNA, which forms a double helical conformation by the highly selective base-pairing rule with the width of 2 nm, is one of the polymers utilized as a template for nanoparticle assembly. Then, holiday junction structure, where two different DNA double strands intersect and replace each complement strand, is an important artificial motif for forming two-dimensional mesh-like DNA morphology. In this study, the two-dimensional sheet with the mesh-like conformation is formed and the growth of the DNA morphology is controlled by changing the temperature in the formation process. The influence of the cooling procedure on the formation process of the two-dimensional DNA sheet is observed by atomic force microscope, and the formation of double strands in the process is traced by absorption spectra. The spectroscopic results demonstrate that the two-dimensional DNA sheet is strongly dependent on the correlation between the applied cooling process and the melting temperature of double helical conformation, and that the growth of the two-dimensional DNA sheet can be manipulated by the cooling procedure. Further, we will show the size control of the DNA sheet by mixing the designed DNA which inhibits the growth of the DNA sheet.     

Fundamentals-a useful index for estimating residual life of motor insulation

During the period from 1955 to 1978, the insulation system of choice for motor windings in Japan was predominantly of the polyester type. Since there are still a number of polyester-insulated motors in the field, there is a demand for a reliable means of evaluating the residual life of these units, the ultimate goal being standardization acceptable to the industry. The present state of this effort in Japan is briefly reviewed. A simple but effective procedure for the diagnostic evaluation of motor life is offered. It is based on tests easily performed on the insulation and within the scope of the average motor repair shop facilities.<>     

Ionic conductivities of polymeric solid electrolyte films containing rare earth ions

Polymeric solid electrolyte films containing rare earth metal ions (Ce³⁺, La³⁺, Yb³⁺) have been prepared, with a view to applying them to solid-state electrochemical devices. The films, composed of poly(ethylene oxide)-grafted poly(methylmethacrylate) (PEO–PMMA), were prepared by dissolving rare earth salts with appropriate amounts of poly(ethylene glycol) dimethyl ether (PEG) that have ethylene oxide units in their structure. The ionic conductance behaviour of the polymeric composite electrolyte systems was investigated by AC impedance and DC polarization methods in an ambient temperature range. The oligo(ethylene oxide) units in the polymer matrix and the PEG components ensured the dissociation of the salts and the high mobility of the resulting ionic species in the solid films. About 10⁻⁵ S cm⁻¹ or above of ionic conductivity was obtained for a PEO–PMMA/PEG/Ce(ClO₄)₃ system at room temperature. The addition of a liquid plasticizer in the composite improved the conductivity by about two orders of magnitude.     

Surface properties of hydroxyapatite ceramic as new percutaneous material in skin tissue

Hydroxyapatite ceramic (HAC) was studied for utilization as a percutaneous device to prevent exit-site and tunnel infection along peritoneal dialysis catheters. As a result, it was found that HAC had good compatibility with skin tissue compared with silicone rubber and glassy carbon. In the present study, the surface properties of HAC after long-term implantation in skin of dogs was evaluated by scanning electron microscopic observation, solubility and bending tests. At 12 weeks after implantation, the surface of HAC was eroded severely by body fluid or cells, and the grain boundaries were clearly relieved. Ingrowth and adhesion of collagen into the etched ditch of HAC were observed. At 12 months, the eroded surface had been tightly covered and adhered to by a collagenous layer in spite of ripping off the surrounding fibrous capsule. In solubility tests, HAC dissolved at the rate of 0.23 mg cm^–2 HAC surface area per year. On the other hand, the bending strength decreased by about 10% at 4 weeks and scarcely decreased after that time. From these results, it was confirmed that the solubility of HAC produced tight contact and strong adhesion with skin tissue to prevent bacterial infection, and HAC was practical for a permanent percutaneous device.     

Super-low friction and lightweight hydraulic cylinder using multi-directional forging magnesium alloy and its application to robotic leg

Abstract

One of the most important missions for robots is to operate in severe environments, and these situations require robots to have ‘toughness’ which can overcome large shocks, degraded communication quality, unexpected condition, and other critical accidents. Although there are many kinds of approaches to realize tough robotic systems, developing a tough actuators is one of the key technologies for them. We focus on hydraulic actuators and attempt to develop a tough robotic actuator with greater toughness than the electromagnetic actuators used in conventional robotic systems. In general, hydraulic actuators have enough toughness for severe environments, but their controllability and lightness are insufficient for robot systems. Herein, we propose novel hydraulic actuators that realizes lightweight with a multidirectional-forging magnesium alloy and have high controllability by low friction pistons. Prototypes were developed to examine the fundamental characteristics of the actuators and compare the two approaches for the low-friction pistons: one is based on a packing mechanism using an elastic restoring pressure, and the other utilizes a fluid-bearing technology. After basic experiments, the prototype was applied to a robotic leg to verify their potential in actual robotic systems. The robotic leg successfully jumped 260 mm in height with 21 MPa.     

New approach to developing LC materials for IDS driving on reflective displays

As usage time for portable electronic terminals increases, associated problems regarding such extended use (e.g., battery holding times and eyestrain) are highlighted. Within the domain of power saving, we previously developed an idling stop (IDS) driving that avoids unnecessary refresh. Moreover, for reducing eyestrain to the highest extent possible, we calculated a luminance change in IDS driving that is not perceived as flickering by humans, via the use of a temporal modulation transfer function. According to the results of such calculations, a liquid crystal mixture that suppresses luminance changes perceived by humans was hence constructed. With the combined use of the liquid crystal mixture and a c‐axis‐aligned crystal oxide semiconductor with low off‐state leakage current, a display could be developed wherein leakage current in IDS driving could be significantly reduced, along with enjoyed benefits of prolonged refresh intervals and power savings. The subject display is very eye‐friendly, with less flickering than comparable technologies.     

Novel Method for Preparing Nickel/YSZ Cermet by a Vapor-Phase Process

A novel method for preparing a nickel/YSZ (yttria-stabilized zirconia) cermet has been developed. In the present work, YSZ was deposited onto a substrate containing NiO as an oxygen source by allowing it to undergo a phase reaction in a vapor mixture of ZrCl₄ and YCl₃. In the initial stage of the reaction, a porous YSZ layer was deposited onto an NiO pellet by chemical vapor deposition (CVD). The porous layer became finer and more gas-tight as the CVD reactions proceeded, and the process then changed from CVD to electrochemical vapor deposition (EVD), resulting in the growth of a dense YSZ layer on the NiO pellet.