The Creep and Thermal Stability Characteristics of a Unidirectionally Solidified Al2O3/YAG Eutectic Composite

Compressive creep characteristics at 1773, 1873, and 1973 K, oxidation resistance over 1000 h at a temperature of 1973 K in ambient air, and the thermal stability characteristics at 1973 K in ambient air of a unidirectionally solidified Al2O3/YAG eutectic composite were evaluated. At a test temperature of 1873 K and a strain rate of 10–4/s, the compressive creep strength of a eutectic composite manufactured by the unidirectional solidification method is approximately 13 times higher than that of a sintered composite with the same chemical composition. The insite eutectic composite also showed greater thermal stability, with no change in mass after an exposure of 1000 hours at 1973 K in ambient air. The superior high-temperature characteristics are closely related to such factors as (1) the in-situ eutectic composite having a microstructure, in which single crystal Al2O3 and single crystal YAG are three-dimensionally and continuously connected and finely entangled without grain boundaries and (2) no amorphous phase is formed at the interface between the Al2O3 and the YAG phases.     

Parameter estimation of radiocardiogram using a minicomputer

Radiocardiography has been widely used as a method for the quantification of cardiac output by applying the principle of the dye dilution method. This paper deals with an automatic analyzing system of radiocardiograms and a parameter estimation procedure using a linear system made up of four compartments with two time delays as a model of transport process in the blood circulatory system. The parameter estimation procedure named the window method in frequency domain is very effective for shortening the computing time and can be easily performed using a minicomputer. Parameter sensitivity analysis is also applied to study behavior of parameters on the model. Some analyzed results of radiocardiograms are shown and it is verified that the procedure is sufficiently useful and efficient for routine clinical use.     

The crystallization and formation of cluster of ethylene ionomer during physical aging

The effect of the physical aging of ethylene ionomers was studied for the samples with the acid content of 5.4 mol%, and the degree of neutralization, 0%, 60% Na, 60% Zn, and 90% Zn. The information about the crystal and the cluster part of the physically aged ionomers was obtained by differential scanning calorimetry and by dynamic viscoelastic measurements, respectively. The degree of crystallinity and the dynamic modulus for the ionomers of the degree of neutralization 0%, 60% Na and 60% Zn increased gradually with the aging time; on the other hand, the crystallinity of 90% Zn remained constant and the modulus at 100°C increased to a certain value up to a period of 100 h, but thereafter the crystallinity increased remarkably and the modulus remained. These facts indicate that the crystallization of neutralized ethylene ionomer starts after clustering and the clustering would finish at early stage of the physical aging for intermediately neutralized ethylene ionomer. The physical aging effect of the ethylene ionomers was, thus, found to be important to material design.     

Frictional properties of structural steel JN2 at cryogenic temperatures in a vacuum

To assess the frictional properties at the wedge of a toroidal field coil of a tokamak fusion reactor, friction tests were conducted using structural steel, JN2, against various materials in a vacuum at low temperatures under a normal load of 10 N and a peak-to-peak sliding amplitude of 100 μm. The temperature was mainly ≈ 5 K and the ambient pressure ≈ 10⁻³ Pa. The relationship between the frictional characteristics and the number of cycles depends on both the material combination and temperature. Two typical patterns of behaviour were observed at 5 K depending on the combination; fairly constant friction and very high and fluctuating friction. The high friction was caused by severe adhesion between surfaces. Temperature dependence of friction was also observed for JN2-copper.     

Changes in right ventricular hemodynamic function by unilateral pulmonary arterial occlusion test

We performed unilateral pulmonary arterial occlusion test (UPAO) for the preoperative evaluation of lung function in patients undergoing lung resection. In this test, the main pulmonary artery of either side is occluded to simulate postoperative functional status. In order to evaluate the right ventricular hemodynamic function, we measured right ventricular ejection fraction (RVEF) and right ventricular end-diastolic volume index (RVEDVI) throughout UPAO by thermodilution method. We investigated the relationships between changes in right ventricular hemodynamic function and postoperative complications related to cardiac functions, namely arrhythmias or heart failure. Thirty-four patients without heart disease prior to lung resection were examined by UPAO, and RVEF and RVEDVI were measured. Analyses demonstrated that changes in RVEF were inversely correlated with changes in RVEDVI. In 6 cases, RVEDVI increased from control by over 20% during UPAO. All of these patients had postoperative cardiac complications. The hypothetical ventricular function curves showed a large increase in RVEDVI relative to right ventricular stroke work index (RVSWI), suggesting a decrease in right ventricular function. In conclusion, these results suggest that changes in RVEDVI during UPAO may predict postoperative cardiac complications in patients undergoing pulmonary resection.     

Study of static cushioning properties: Automated data input and reliability test of static cushioning properties

A computer-controlled compression testing machine is used to compile a database of the static cushioning properties of package cushioning materials. Through research into automated data input procedures, so far not developed, a direct transfer program (ZABCON) has been devised, which allows direct access to the disk in which compression test data are stored. Elimination of manual data input has led to simplified and easy construction of a database, and the applied laboratory tests, such as that for determining the relationship between static cushioning properties and compression rate, can be performed quite readily. Also in this report, the application of the static cushioning characteristics of foamed polystyrene in the cushioning package design of dummy goods and the evaluation of its reliability by drop testing are discussed.     

Simultaneous detection of near-field topographic and fluorescence images of human chromosomes via scanning near-field optical/atomic-force microscopy (SNOAM)

Scanning near-field optical/atomic-force microscopy (SNOAM) provided us with simultaneous topographical and optical images of human chromosomes using a sharp and bent optical fiber as a near-field optical probe. Native chromosomes were spread out onto a coverslip using the surface-spreading whole-mount method. The SNOAM system does not need pretreatment of samples such as metal coating or chemical immobilization. Near-field topographic and fluorescence images provided useful information on native chromosome structure.     

Anodic chlorination of aniline in N,N-dimethyl-formamide and N,N-dimethylacetamide

A pertinent electrochemical synthesis of 2,4,6-trichloroaniline (TCA) in anhydrous media was studied. The influence of the solvent, the chlorinating reagent, the electricity passed and the nature of the anode material, were investigated. TCA was produced in electrolytic solutions whose solvents were amides with strong nucleophilicity as N,N-dimethylformamide (DMF) and N,N-dimethylacetoamide (DMAc), and was obtained selectively by the controlled potential electrolysis of aniline in the solution containing LiCl. The definition of the experimental conditions corresponding to an optimum and selective electrolysis of TCA was described.