Mechanism for degradation of poly(sodium acrylate) by bacterial consortium no. L7-98

Poly(sodium acrylate) (PSA) can be degraded by consortia of several bacterial species. We investigated the degradation mechanism for PSA (average molecular weight, 2100) by consortium no. L7-98. PSA was used as the sole carbon source in a mineral salt medium. After cultivation, the PSA had a range of molecular weights, including low-molecular-weight compounds, which were purified by gel-permeation and reversed-phase column chromatography. One purified compound, B1, with the molecular weight of 200, had a carbonyl group next to the terminus, according to 1H and 13C nuclear magnetic resonance spectrometry and X-ray analysis of the crystal structure. Two categories of metabolites of PSA were detected in the culture by electrospray ionization mass spectrometry. Results of high-resolution mass spectrometry (HR-MS) suggested that one kind of compounds had a carbonyl group and that the other kind of compounds had an aldehyde group and a double bond. Compounds having the molecular weights of 200 and 272 were rapidly produced from an acrylic acid oligomer with the molecular weight of 258 by resting cells of the consortium. HR-MS showed that a methylene group at the terminal unit was oxidized to a carbonyl group and that the compound with the molecular weight of 200 was compound B1. From these results, we propose that the degradation pathway of PSA involves (i) oxidation of a methylene group to a carbonyl group next to the terminus, (ii) decarboxylation to form an aldehyde group and dehydrogenation to form a double bond between the terminal unit and the next unit, and (iii) oxidation of the aldehyde group to a carboxyl group followed by elimination of an acetic acid.     

Modeling power consumption by electric vehicles and its impact on power demand

Electric vehicles are expected to be one of the means to level the difference between the peak time and off-peak time electric loads. From a global point of view, increasing environmental concerns make us recognize the necessity of replacing conventional gasoline cars by electric vehicles. Due to problems with the efficiency and life time of a battery, it will take time before electric vehicles are in general use. Electric vehicles are used only in specialized small fields. Automobile makers are cooperating to invent advanced batteries for use in electric vehicle. Thus, it is timely to develop appropriate infrastructure standards and technologies to make electric vehicles attractive to consumers. In this paper, we investigate the impact of electric vehicle on electricity demands by assuming analytical models of EV consumption. The charging characteristics of a battery, the running performance, and the practical driving distance of each type of car are used in this analysis. According to the scenario analysis, the simulations clearly presented the impact of EV introduction using the practical day load duration curve for the Tokyo cosmopolitan area. The authors conclude that electric vehicles are effective for load leveling under some sort of market regulations. If there is no regulation in the EV market, power shortage will occur on both nighttime and daytime because of the concentration of the nighttime charge and the quick charge. © 1997 Scripta Technica, Inc. Electr Eng Jpn, 120(4): 40–47, 1997     

Application of a force‐balanced coil to a tokamak device

High field is very favorable for magnetically confined fusion devices such as a tokamak, but electromagnetic force derived from the field becomes a fatal problem. In particular, the largest in‐plane centering force hinders toroidal field coils from operating at higher fields. Variable pitch multihelical coils, which we term force‐balanced coils (FBCs), by which this force is drastically reduced, are proposed for the coil system of tokamaks. FBCs can also provide poloidal flux swing for plasma breakdown and current induction during the ramp‐up phase of the coil current. In this paper, we indicate how to design FBCs for tokamaks. The fusion reactor‐size FBCs are designed and compared with that of the conventional toroidal field coil system. © 1999 Scripta Technica, Electr Eng Jpn, 130(3): 39–48, 2000     

Effects of Temperature and Photoperiod on Phytotoxic Root Exudates of Cucumber (Cucumis sativus) in Hydroponic Culture

In order to elucidate the effects of temperature and photoperiod on the quality and quantity of plant root exudates, a Japanese cucumber (Cucumis sativus, cv. Shougoin-Aonaga-Fushinari) was grown hydroponically in growth chambers under controlled temperature and photoperiod conditions with or without the addition of activated charcoal (AC) to the nutrient solutions. Fresh AC was used to trap the organic compounds exuded from cucumber roots every two weeks. Cucumber plants without AC were severely retarded in root growth and in the accumulation of dry matter, especially at high temperature and long photoperiod, compared to those with AC. The growth inhibitors, adsorbed on the AC or accumulated in the nutrient solution without AC, were extracted by organic solvents and analyzed by GC-MS. Benzoic acid and its derivatives, cinnamic acid derivatives, and fatty acids were identified. The rate of root exudation in vegetative and reproductive stages for some of these organic acids increased with the elevation of temperature and the elongation of photoperiod, and the mean rate was two or more times higher than the minimum exudation at low temperature with short photoperiod. Some of the identified compounds significantly inhibited the germination and/or root growth of lettuce and cucumber.     

In Vivo Transcutaneous Monitoring of Hemoglobin Derivatives Using a Red-Green-Blue Camera-Based Spectral Imaging Technique

Cyanosis is a pathological condition that is characterized by a bluish discoloration of the skin or mucous membranes. It may result from a number of medical conditions, including disorders of the respiratory system and central nervous system, cardiovascular diseases, peripheral vascular diseases, deep vein thrombosis, and regional ischemia. Cyanosis can also be elicited from methemoglobin. Therefore, a simple, rapid, and simultaneous monitoring of changes in oxygenated hemoglobin and deoxygenated hemoglobin is useful for protective strategies against organ ischemic injury. We previously developed a red-green-blue camera-based spectral imaging method for the measurements of melanin concentration, oxygenated hemoglobin concentration (C_HbO), deoxygenated hemoglobin concentration (C_HbR), total hemoglobin concentration (C_HbT) and tissue oxygen saturation (StO₂) in skin tissues. We leveraged this approach in this study and extended it to the simultaneous quantifications of methemoglobin concentration (C_metHb), C_HbO, C_HbR, and StO₂. The aim of the study was to confirm the feasibility of the method to monitor C_metHb, C_HbO, C_HbR, C_HbT, and StO₂. We performed in vivo experiments using rat dorsal skin during methemoglobinemia induced by the administration of sodium nitrite (NaNO₂) and changing the fraction of inspired oxygen (FiO₂), including normoxia, hypoxia, and anoxia. Spectral diffuse reflectance images were estimated from an RGB image by the Wiener estimation method. Multiple regression analysis based on Monte Carlo simulations of light transport was used to estimate C_HbO, C_HbR, C_metHb, C_HbT, and StO₂. C_metHb rapidly increased with a half-maximum time of less than 30 min and reached maximal values nearly 60 min after the administration of NaNO₂, whereas StO₂ dramatically dropped after the administration of NaNO₂, indicating the temporary production of methemoglobin and severe hypoxemia during methemoglobinemia. Time courses of C_HbT and StO₂, while changing the FiO₂, coincided with well-known physiological responses to hyperoxia, normoxia, and hypoxia. The results indicated the potential of this method to evaluate changes in skin hemodynamics due to loss of tissue viability and vitality.     

Serum APOA4 Pharmacodynamically Represents Administered Recombinant Human Hepatocyte Growth Factor (E3112)

Background: Hepatocyte growth factor (HGF) is an endogenously induced bioactive molecule that has strong anti-apoptotic and tissue repair activities. In this research, we identified APOA4 as a novel pharmacodynamic (PD) marker of the recombinant human HGF (rh-HGF), E3112. Methods: rh-HGF was administered to mice, and their livers were investigated for the PD marker. Candidates were identified from soluble proteins and validated by using human hepatocytes in vitro and an animal disease model in vivo, in which its c-Met dependency was also ensured. Results: Among the genes induced or highly enhanced after rh-HGF exposure in vivo, a soluble apolipoprotein, Apoa4, was found to be induced by rh-HGF in the murine liver. By using primary cultured human hepatocytes, the significant induction of human APOA4 was observed at the mRNA and protein levels, and it was inhibited in the presence of a c-Met inhibitor. Although mice constitutively expressed Apoa4 mRNA in the small intestine and the liver, the liver was the primary organ affected by administered rh-HGF to strongly induce APOA4 in a dose- and c-Met-dependent manner. Serum APOA4 levels were increased after rh-HGF administration, not only in normal mice but also in anti-Fas-induced murine acute liver failure (ALF), which confirmed the pharmacodynamic nature of APOA4. Conclusions: APOA4 was identified as a soluble PD marker of rh-HGF with c-Met dependency. It should be worthwhile to clinically validate its utility through clinical trials with healthy subjects and ALF patients.     

Stress corrosion cracking of copper in swollen bentonite simulating nuclear waste disposal environment

Stress corrosion cracking (SCC) of pure copper in bentonite clay was examined using a slow strain rate test (SSRT). Bentonite was swollen with pure water or aqueous solutions containing NH₃ of 5 and 10 mM. Thick corrosion films and particulate deposits were formed on the copper surface after the SSRT. Typical tarnish rupture-type SCC occurred on pure copper in swollen bentonite with and without NH₃. The crack propagation rate was enhanced by NH₃. It is confirmed that a thick oxide layer was formed on copper during plastic deformation, resulting in tarnish crack-type SCC. Many particulate deposits observed on the surface were formed due to the rapid dissolution of Cu²⁺ ions to form porous CuO at local deformed sites, regardless of the SCC occurrence.