Structure and properties of nanocomposites based on poly(butylene succinate) and organically modified montmorillonite

Poly(butylene succinate) and organically modified montmorillonite nanocomposites with there different compositions were prepared via melt blending in a twin‐screw extruder. The structure of the nanocomposites was studied with X‐ray diffraction and transmission electron microscopy, which revealed the formation of intercalated nanocomposites, regardless of the silicate loading. Dynamic mechanical analysis revealed a substantial increase in the storage modulus of the nanocomposites over the entire temperature range investigated. The tensile property measurements showed a relative increase in the stiffness with a simultaneous decrease in the yield strength in comparison with that of neat poly(butylene succinate). The oxygen gas barrier property of neat poly(butylene succinate) improved after nanocomposite preparation with organically modified montmorillonite. The effect of the layered‐silicate loading on the melt‐state linear viscoelastic behavior of the intercalated nanocomposites was also investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 777–785, 2006     

Two-stage pyrolysis of heavy oils. 3. Pyrolysis of tar-sand bitumens. Relation between ethylene yield and structural characteristics of heavy oils

Thermal cracking of tar-sand bitumens has been carried out using a two-stage pyrolysis reactor with temperature zones of 440°C and 750–800°C, respectively. Feedstocks were pyrolysed in the first stage into cracked oils, which were carried to the second stage for subsequent pyrolysis. Only 12–14 wt% of ethylene was obtained from tar-sand bitumens at the residence time of 1.2 s in the second stage, although 27 and 16 wt% were obtained from Taching and Iranian heavy vacuum residues, respectively. The tar-sand bitumens contain shorter paraffinic straight-chains and have more branched molecules than the vacuum residues of petroleum. A straight-chain paraffin index is proposed, with which a good correlation was obtained between ethylene yield and the fraction of straight-chain paraffin carbons in the heavy oil.     

Effect of Agglomeration on Mechanical Properties of Porous Zirconia Fabricated by Partial Sintering

Porous ZrO₂ ceramics were fabricated by compacting a fine ZrO₂ powder, followed by pressureless sintering. Two unidirectional pressures of 30 and 75 MPa were used to prepare the green compacts. The strength and the fracture toughness of porous ZrO₂ specimens sintered from the compacts prepared by 75 MPa were substantially higher than those by 30 MPa, especially for the specimens with low porosity. However, the corresponding Young's moduli were identical. This caused the strain to failure of these porous bodies to increase significantly with increasing compaction pressure. Microstructural analyses showed that a number of voids and small flaws existed in the green compacts prepared by the lower pressure, due to the agglomeration of fine ZrO₂ grains. It was revealed that the ZrO₂ agglomeration resulted in a localized nonuniform shrinkage and degraded the mechanical properties of porous ZrO₂ ceramics.     

Prediction of the biologically active sites in eclosion hormone from the silkworm, Bombyx mori

The structure-activity relationship of eclosion hormone from the silkworm, Bombyx mori, was analyzed. First, the probable active residues in silkworm eclosion hormone and also tobacco hornworm eclosion hormone were predicted by the average distance map method. To examine the contributions of those residues to the activity of silkworm eclosion hormone, Gly-substituted mutants for those predicted residues were produced by site-directed mutagenesis and their activities were evaluated by a bioassay. Finally, Glu12, Met24 and Phe25 were estimated to be the crucial residues for the eclosion hormone activity. The possibility of the development of a blocker of an eclosion hormone receptor on the basis of the present work is also discussed.      

聚氨酯弹性体的电致伸缩效应

电致伸缩是指在外电场作用下电介质所产生的与场强二次方成正比的应变。近年来对聚氨酯电致伸缩性能的研究发现，聚氨酯弹性体综合了压电聚合物与传统的锆钛酸铅(PZT)压电陶瓷片的优点，具有很好的应用前景，本文简单介绍了聚氨酯的电致伸缩效应。     

Preparation of plasma-polymerized membranes from I-(trimethylsilyl)-I-propyne and gas permeability through the membranes

Summary Plasma-polymerized membranes for gas separation were prepared from 1-(trimethylsilyl)-1-propyne. The permeation data of He, H₂ 0₂, N₂, CO₂, and CH₄ through the membranes showed plasma-polymerized 1-(trimethylsilyl)-1-propyne had high permselectivity but low permeability compared with poly[l-(trimethylsilyl)-1-propyne]. This behavior is considered to be due to the crosslinking structure of the plasma-polymerized membrane. The correlation between plasma polymerization conditions and the membrane performance was studied. The optimum condition at which the deposition rate of the plasma polymer is maximized agreed with the optimum value to yield maximum separation factor of gases through the membrane.     

Temperature Dependence of Young's Modulus and Internal Friction in Alumina, Silicon Nitride, and Partially Stabilized Zirconia Ceramics

The temperature dependence of Young's modulus and internal friction (Q⁻¹)in alumina, silicon nitride, and partially stabilized zirconia (Y-PSZ) ceramics was studied. Little change in Q⁻¹ was found for alumina, whereas Q⁻¹ for silicon nitride ceramics increased above 700°C. The Q⁻¹ of Y-PSZ increased markedly with increasing temperature up to a peak at ∼200°C.     

Synthesis and properties of novel side-chain-sulfonated polyimides from bis[4-(4-aminophenoxy)-2-(3-sulfobenzoyl)]phenyl sulfone

A novel side-chain-sulfonated aromatic diamine of bis[4-(4-aminophenoxy)-2-(3-sulfobenzoyl)]phenyl sulfone (BAPSBPS) was synthesized. Sulfonated copolyimides were synthesized by random and sequenced block copolymerization of 1,4,5,8-naphthalene tetracarboxylic dianhydride, BAPSBPS and nonsulfonated diamine. They displayed good solubility in common aprotic solvents and high desulfonation temperature of 350 °C, suggesting the high stability of sulfonic acid groups. The reduced viscosity was in the range of 0.4-1.8 dl/g at 0.5 g/dl and 35 °C. Flexible and tough membranes with reasonably high mechanical strength were prepared. They showed anisotropic membrane swelling with larger swelling in thickness than in plane. They displayed reasonably high proton conductivity (σ), taking their lower ion exchanging capacity (IEC) into account. For example, the membrane with IEC of 1.54 mequiv/g showed σ values of 81 and 11 mS/cm in water and 70% RH, respectively, at 60 °C.     

Ba-eu (barium-europium)

Several thermodynamic models for calculating binary phase diagrams published in the literature have been reevaluated. Problems in some of these models are already evident in the models themselves and may also be seen in the resulting calculated phase diagrams. When a calculation is attempted, thermodynamic models with quite different formulations may result in very similar proposed phase diagrams. In such cases, if experimental data of a binary phase diagram can be represented reasonably well by several different thermodynamic models, a simpler model often provides the clearest insight into the basic properties of the system. If a calculated phase diagram results in unusual phase relationships, the adopted thermodynamic model may be inappropriate or may involve unrealistic parameters. If the thermodynamic model is clearly unrealistic and yet the calculated phase diagram appears to be normal, errors in calculation or in interpretation may be suspect. Various examples of unlikely combinations of thermodynamic models and phase diagrams are discussed.