Low-temperature hydrodechlorination of chlorobenzenes on platinum-supported alumina catalysts

Hydrodechlorination of chlorobenzenes on platinum (Pt)-supported γ-alumina and alumina Lewis superacid (AmLSA) catalysts was carried out at room temperature and ambient pressure using a fixed bed flow reactor and a semi-batch reactor. Both the catalysts indicated good activity for the hydrodechlorination, but the former was superior to the latter. The hydrodechlorinations of reactants C₆H_6−xCl_x (x=1, 2, 3) proceeded step-wisely to benzene and then cyclohexane via C₆H_6−yCl_y (y=x−1). The reactions seem to be promoted by the contribution of spillover hydrogen formed on the Pt-supported catalysts. The catalysts deactivated with reaction time and the amount of chlorine that accumulated on the Pt-supported γ-alumina catalyst in the hydrodechlorination of 1,4-dichlorobenzene for 3 h was near to that estimated from the converted reactant molecules. When the deactivated catalysts were treated in a stream of hydrogen above 503 K, the original activity was completely restored, but the deactivation phenomenon with reaction time was observed again.     

Boiling two-phase flow under microgravity

To study the effects of reduced gravity on the flow regime and the heat transfer characteristics of a boiling two-phase horizontal flow, parabolic flight experiments were performed by using an aircraft. The gravity level during the parabolic flight and the duration time were about −0.01g_e +0.01g_e and 20 s, respectively. Under earth gravity, many small bubbles are detached very frequently from the heater rod surface, flowing into the upper stream due to the buoyancy and resulting in a stratified flow in the cases of lower inlet fluid velocity and higher heat flux. Under microgravity conditions, bubbles are hardly detached from the heater rod, growing and coalescing to become much larger along the heater rod, surrounding the heater rod in the downstream. This tendency was more noticeable in the cases of lower inlet fluid velocity, higher heat flux and lower inlet fluid subcooling. The local heat transfer coefficients at the bottom of the heater rod tend to decrease slightly under microgravity compared with those under earth gravity because of the reduction of the heat removal due to natural convection. On the other hand, the local heat transfer coefficients at the top of the heater rod tend to increase slightly under microgravity. However, the differences of the local heat transfer coefficients are very small in spite of large differences of the flow regimes under earth gravity and microgravity.     

The activation of furfuryl alcohol polymerization by oxygen and its enhanced mechanical properties

The effect of oxygen and additional oxygen providers on furfuryl alcohol polymerization was investigated through chemical analyses and mechanical evaluation. NMR, UV–vis, Fourier transform infrared, and gas chromatography–mass spectrometry (GC–MS) results suggested that atmospheric oxygen and the further addition of an oxygen source functioned as an activator for the entire network polymerization. Interestingly, the construction of a conjugated structure on the furan linear chain, which is key to three-dimensional cross-linking, also appears to be accelerated in the presence of oxygen. Furthermore, the introduction of oxygen providers into the curing system successfully enhanced the mechanical properties of the cured furan resin.     

Ultra-high-precision time control system over any long time delay for laser pump and synchrotron x-ray probe experiment

An ultra-high-precision clock system for long time delay has been developed for picosecond time-resolved x-ray diffraction measurements using synchrotron radiation (SR) pulses and synchronized femtosecond laser pulses. The time delay control between pump laser pulse and the probe SR pulse was achieved by combining an in-phase quadrature modulator and a synchronous counter. This method allowed us to change the delay time by a nearly infinite amount while maintaining the precision of +/-8.40 ps. Time-resolved diffraction measurements using the delay control system were demonstrated for precise measurement of an acoustic velocity in a single crystal of gallium arsenide.     

νMOS cellular‐automaton circuit for picture thinning and shrinking

In this study we propose a design for an LSI circuit that implements a cellular automaton. The cellular automaton is a parallel and distributed architecture device suitable for high‐speed image processing. To develop a cellular automaton LSI circuit, it is necessary to design small‐size unit cell circuits that can operate according to cell–cell interaction rules. We propose to use νMOSFET devices for such cell circuits. Template matching is implemented by combining multiple input νMOSFET circuits and inverters. A cell circuit was designed for image thinning and shrinking, and its operation was analyzed using a circuit simulator. It was demonstrated that high speed operation (up to 100 MHz clock frequency) can be obtained. © 1999 Scripta Technica, Electr Eng Jpn, 126(3): 41–48, 1999     

High-sensitivity detection of proteins using gel electrophoresis and atomic force microscopy

We have developed a method to detect specific proteins with a high sensitivity using a gel electrophoresis method and force measurement of atomic force microscopy (AFM). Biotinylated proteins were separated by electrophoresis and fixed with cross-linking chemicals on the gel, followed by direct force measurement between the biotinylated proteins on the gel and a streptavidin-modified tip of an AFM cantilever. We were able to achieve a high enough sensitivity to detect the picogram order of the biotinylated proteins by evaluating the frequency of the interaction force larger than 100 pN in the force profile, which corresponds to the rupture force of interaction between streptavidin and biotin.     

Slab optical waveguide high-acidity sensor based on an absorbance change of protoporphyrin IX

A sensitive and fast-responsive evanescent wave absorption sensor has been constructed for pH measurements in highly acidic ranges. This sensor is based on a pH-dependent color change of protoporphyrin IX (PPIX). For the sensitive detection, a visible attenuated total reflection spectrometer with a slab optical waveguide (SOWG) was laboratory-made, and the guiding layer surface was modified with a PPIX-immobilized acrylamide-based thin membrane. The sensing membrane with a thickness of approximately 1 mum was directly fabricated on the SOWG glass surface by copolymerization of acrylamide, N,N'-methylene bisacrylamide, and PPIX in the narrow space confined by a cover plate. PPIX possesses two double bonds in its structure, and so it can be covalently incorporated into the membrane. The response characteristics of the PPIX-immobilized optode membrane were explored using aqueous solutions with different concentrations of HNO(3) or HCl. The optode membrane provided characteristic Soret band absorption spectra depending on the hydrogen ion concentration; the absorbance at 410 nm increased with increasing the concentrations in the range of 0.15-2 M, corresponding to the range of pH -0.3 to 0.8. The absorption signal reached 90% of its final value within 10 s, while the absorption signal was quite readily returned to background level simply by passing 2 mL of distilled water through a flow cell with a volume of 16.5 muL placed on the SOWG. Due to the rapid response and reversibility, this sensor could be operated in a flow-through mode as well as in a conventional static mode, where deionized water was conveniently used as a carrier and conditioning solution. In terms of the stability and precision, this sensor showed no significant change in response even after 100 assays and after being stored in a dry condition for over 6 months. Relative standard deviations for 10 replicate measurements were less than 1.8% in the linear range, and the detection limit calculated from 3 times of the standard deviation was 0.02 pH unit.