Photoluminescence enhancement by isolating β-FeSi2 layers from defective layers

We have investigated an optimal annealing process in order to enhance 1.55 μm light emission from semiconducting β-FeSi₂ and found that two steps annealing at 600 °C and 800 °C is effective to its enhancement. Rutherford backscattering spectroscopy and SEM observations revealed that pronounced surface segregation of Fe atoms during annealing at 600 °C caused surface precipitate of β-FeSi₂. The enhancement of light emission is attributed spatial isolation of the surface β-FeSi₂ (light emitting layer) from damaged and defective layers with nonradiative recombination centers.     

Preliminary results for SeaWiFS vicarious calibration coefficients in the Baltic Sea

The technique of vicarious calibration is used in connection with an atmospheric correction to improve the Sea viewing Wide Field of view Sensor (SeaWiFS) normalized water-leaving radiance by the first determination of mean vicarious calibration coefficients from in situ measurements in the Baltic Sea. A necessary adjustment of the SeaWiFS pre-flight calibration slope was found to be +3.5%, +0.3%, ?1.7%, ?0.4%, +0.8% and ?1.3% for the first six SeaWiFS channels. The derived mean vicarious calibration coefficients are higher than the coefficients in the standard SeaWiFS Data Analysis System (SeaDAS) software but with similar shape and good agreement with other research results. The coefficients were used to obtain better normalized water-leaving radiance from SeaWiFS measurements in the Baltic Sea. The deviations of calculated to measured radiances in the open Baltic Sea are between 3% and 47% in the channels 412 to 670?nm, with the trend of higher deviations in the blue channels. The objective of radiance determination in all SeaWiFS channels with a maximum uncertainty of 5% in clear water regions is probably not reachable in the turbid water of the Baltic Sea.     

Intra-molecular mobility of holes along rod-like helical Si backbones in optically active polysilanes

Intra-molecular mobility of positive charge carriers in poly(n-hexyl-[S]-2-methylbutylsilane) (PHMBS) films doped with N,N′-bis(2,5-di-tert-buthylphenyl)-3,4,9,10-perylenedicarboximide (PDI) is studied by time-resolved microwave conductivity (TRMC) measurements. PHMBS with optically active side chains has a rod-like tightly locked Si catenation with unlikely long persistence length compared with conventional dialkyl-substituted polysilanes. It was found that PDI is a suitable electron acceptor for PHMBS as it provides the high product of photo carrier generation yield ? as ～0.08% under an excitation at 355 nm. The efficient electron transfer reaction from PHMBS to PDI gives clear conductivity transients ascribed to the positive charges on the Si catenation of PHMBS by TRMC measurements. The estimated value of isotropic mobility along the tightly locked Si catenation is 0.36 cm² V^?1 s^?1, suggesting the presence of mobile holes on the backbones of PHMBS.     

Hole-injection properties of annealed polythiophene films to replace PEDOT–PSS in multilayered OLED systems

Hole-injection properties of annealed poly(alkoxy- and alkylthiophene) films in OLEDs were studied. Among them, annealed poly(3,3′-dihexyloxy-2,2′-bithiophene) (aPHOBT) film exhibited good hole-injection properties and a triple-layered OLED with the structure ITO/aPHOBT/PVK/Alq3/Mg–Ag (device I) showed much higher performance than a double-layered device without the aPHOBT layer (device II, ITO/PVK/Alq3/Mg–Ag). Device I was slightly inferior to a device having a PEDOT–PSS layer as the hole injector (device III, ITO/PEDOT– PSS/PVK/Alq3/Mg–Ag) in the low-intermediate region of the applied voltage (6–11 V), but gave comparable luminance to III when the applied voltage exceeded 11 V.     

Liquid-liquid extraction for efficient synthesis and separation by utilizing micro spaces

Enhancement of mass transfer between two phases and improvement of extraction efficiency are expected if features of micro spaces are adopted for a liquid-liquid two-phase process. In this work, three extraction operations, contact flow in a Y-shaped microchannel, segmented flow and emulsification, have been investigated. Extraction using segmented flow is dependent on mass transfer by molecular diffusion and its rate is enhanced by the internal circulation flow generated inside slugs. The extraction rate can be controlled precisely by adjusting operational parameters such as the flow rate and the flow rate ratio. Liquid-liquid two-phase separation can be achieved instantly. Thus, continuous operation of a process involving liquid-liquid extraction and then two-phase separation is expected to be possible. For extraction based on emulsification, rapid extraction is made possible owing to significant increase in the interfacial area. Though extraction itself is rapid, liquid-liquid separation may take a long time because coalescence of stable emulsions requires time. It is suitable for systems strongly requiring only rapid extraction. Advanced reaction-separation systems can be developed by combining the extraction operations, making full use of the characteristics of segmented flow or emulsification and the reaction.     

Microanalyses on the RuO2 Particle–Glass Matrix Interface in Thick-Film Resistors with Piezoresistive Effects

The piezoresistive mechanisms of composite thick films based on RuO₂ particles and both calcium-borosilicate and bismuth-borosilicate glass matrices were investigated by chemical and electrical microanalyses. The resistor based on bismuth-borosilicate glass showed higher sensitivity than that based on calcium-borosilicate glass. It was confirmed that the diffusion of ruthenium into glass affects the binding state of RuO₂ at the interface of the glass. Furthermore, an intermediate resistive layer is detected around the RuO₂ particle. These results suggest that the piezoresistive effect is related to a change in the electrical conductivity of the interfacial reaction layer caused by the diffusion of ruthenium into glass.     

Relationship between Expression of Onco-Related miRNAs and the Endoscopic Appearance of Colorectal Tumors

Accumulating data indicates that certain microRNAs (miRNAs or miRs) are differently expressed in samples of tumors and paired non-tumorous samples taken from the same patients with colorectal tumors. We examined the expression of onco-related miRNAs in 131 sporadic exophytic adenomas or early cancers and in 52 sporadic flat elevated adenomas or early cancers to clarify the relationship between the expression of the miRNAs and the endoscopic morphological appearance of the colorectal tumors. The expression levels of miR-143, -145, and -34a were significantly reduced in most of the exophytic tumors compared with those in the flat elevated ones. In type 2 cancers, the miRNA expression profile was very similar to that of the exophytic tumors. The expression levels of miR-7 and -21 were significantly up-regulated in some flat elevated adenomas compared with those in exophytic adenomas. In contrast, in most of the miR-143 and -145 down-regulated cases of the adenoma-carcinoma sequence and in some of the de novo types of carcinoma, the up-regulation of oncogenic miR-7 and/or -21 contributed to the triggering mechanism leading to the carcinogenetic process. These findings indicated that the expression of onco-related miRNA was associated with the morphological appearance of colorectal tumors.     

Investigation of reacting flow fields in miscible viscous fingering by a novel experimental method

The reacting flow fields in reactive miscible viscous fingering in a Hele‐Shaw cell studied by Nagatsu and Ueda had not been completely elucidated, mainly because one cannot exactly recognize where and when the reaction takes place in the reactive fingering pattern. We developed a novel experimental method that allowed us to identify the reaction region in the fingering pattern employed in the previous studies. The novel method involves switching of the less‐viscous liquid injected in both the nonreactive and reactive experiments. By using the novel method, we succeeded in showing how the reaction region in the fingering pattern was affected by the initial reactant concentrations, the Péclet number, and time. We propose physical models of the reacting flow field in the cell's gap direction that can explain the obtained experimental results. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Evaluation of three-dimensional effects in short deep beams using a rigid-body-spring-model

Three-dimensional (3-D) effects in short deep beams without stirrups that failed in shear were investigated experimentally and analytically. Two deep beams with a shear span to depth ratio (a/d) of 0.5 and with different beam widths were tested. The effect of beam width on load-carrying capacity, failure mode, crack pattern and 3-D behavior was investigated, and shape effect due to beam width was clarified. In addition, the beams were analyzed by the 3-D rigid-body-spring model (RBSM). RBSM is a discrete form of modeling that presents realistic behavior from cracking to failure, and 3-D RBSM is applicable to simulate 3-D behavior as well as the confinement effect of concrete. Analytical results in terms of load–displacement curves and crack pattern are compared with the experimental results. Three-dimensional deformations, strut widths and cross-sectional stress distribution are investigated analytically and compared with the experimental results to determine 3-D behavior in detail. The 3-D effects in short deep beams are clarified.     

Thermal stability and crystallisation of a Zr55Cu30Al10Ni5 bulk metallic glass studied by in situ ultrasonic echography

An original in situ ultrasonic echography technique was used to study the thermal stability and crystallisation of a Zr₅₅Cu₃₀Al₁₀Ni₅ bulk metallic glass between RT and 630 °C. Changes in Young's modulus with temperature were reported allowing to study the supercooled-liquid state and the crystallisation process. Investigations of viscoelastic properties gave information on the correlation factor (hierarchically correlated motion theory) and three distinct crystallisation stages were observed. Their kinetics were studied using Voigt's and Reuss' approximations for a two-phase material and comparisons with the Johnson–Mehl–Avrami–Kolmogorov theory allowed us to consider a mixed surface/internal nucleation for the first stage and a surface nucleation for the two last stages.