Properties of copolyimides prepared from different tetracarboxylic dianhydrides and diamines

Various copolymides were prepared from two acid dianhydrides (BPDA, 3,3′,4,4′-biphenyl tetracarboxylic dianhydride; PMDA, pyromelitic dianhydride) and two diamines (PPD, p-phenylene diamine; ODA, 4,4′-oxydianiline). The thermal and mechanical properties of these polyimides were examined in detail. By appropriately selecting the ratios of the acid dianhydride component and the diamine component, polyimide films having desirable mechanical and thermal characteristics can be obtained. Further, it was proved that there is a correlation between the properties and the compositions of the copolyimides and that the properties could be estimated from the compositions by the use of multiple regression analysis. © 1996 John Wiley & Sons, Inc.     

Aortic valve papillary fibroelastoma. A diagnosis by transthoracic echocardiography

Cardiac papillary fibroelastomas are unusual, frond-like growths typically found on cardiac valves, diagnosed incidentally on autopsy or cardiac surgery, but rarely during life. We report a rare case of an aortic valve papillary fibroelastoma detected by transthoracic echocardiography and confirmed by histologic study.     

Magnetic anisotropy in intermetallic compounds containing both uranium and 3d-metal

Magnetic properties of intermetallic compounds containing both uranium and a 3d metal (Fe, Co) are summarized and discussed. It was shown that the ordered magnetism of the U and 3d-metal sublattices can coexist in the same compound (e.g. with 2–17 and 1–12 stoichiometries) even at room and elevated temperatures.     

Impact Fatigue Damage of GFRP Materials Due to Repeated Raindrop Collisions

An impact fatigue study has been conducted for GFRP composite laminates to investigate failure mechanisms. A nylon bead with diameter of 4 mm was used as an impactor to simulate raindrop impact. Various specimen thicknesses of 3.0, 4.0 and 5.0 mm were used during experiment. Incident impact velocity of nylon bead ranged between 100 to 220 m/s. Optical microscopic observations were conducted to evaluate the damage at specimen center part of front and back surfaces. SEM investigations were made on the cross-section of damaged specimen. In conclusion, there are three damage modes were found to appear: debonding, matrix cracking, and delamination. Debonding occurred inside specimen at an early stage. Matrix cracking at front speciemens surface was ring crack, and that at back specimen surface was star crack. Delamination was resulted by repeated impacts. Initiation life for each damage mode depends on incident impact energy expressed as an (E–N) diagram of impact fatigue.     

INTERMETALLIC COMPOUNDS AND THEIR FORMATION REACTIONS IN SYSTEM Fe-Cr-Mo AT HIGH-TEMPERATURES

The stable ranges concerning the composition and temperature have been experimentally de-termined for the intermetallic compounds in system Fe-Cr-Mo at high-temperatures. Theisothermal section of the Fe-Cr-Mo ternary phase diagram at 1250℃ and the formation re-actions for the intermetallic compounds, which are different in part from those shown in theliterature, have been proposed.     

Effect of applying voltage on photocatalytic destruction of 1,4-dioxane in aqueous system

In the current work, we prepared a TiO₂ coating on stainless mesh using electrophoretic deposition (EPD), and applied voltage to a stainless mesh to examine the synergy effect on photocatalysis of both 1,4-dioxane and ethylene glycol diformate (EGDF), a main intermediate of the photocatalysis of 1,4-dioxane. The photocatalytic decomposition rate of 1,4-dioxane depends on applying voltage under diffusion-limited reaction conditions. Ethylene glycol diformate and 1,4-dioxane exhibited inverse voltage dependence. Voltage swing provides high-efficiency photocatalysis of 1,4-dioxane while suppressing EGDF formation. This method will be effective for a photocatalysis system containing several chemicals, each with different voltage dependence.     

Effect of dispersant on paste rheology in preparation of porous alumina with oriented pores by extrusion method

The effect of additives on paste rheology was investigated for preparation of porous ceramics with unidirectionally aligned cylindrical pores. Ammonium poly-carboxylic acid (APA) used as a dispersant and it was adsorbed on alumina powder surface. The adsorption isotherm of APA was fitted by Langmuir equation. The saturated monolayer adsorption was 5.9 mg/g. The apparent viscosity became a minimum at 0.8 mass % of APA corresponding to 71.2 mPa⋅s. This APA amount of 5.6 mg/g, is in good agreement with the observed APA amount. Since the nylon 66 fibers (0–35 vol. %) mixed with the alumina powder have a strong interaction with each other, they became twisted and agglomerated. This agglomeration increased with increasing fiber content but decreased by adding oleic acid. The pastes with added oleic acid were capable of being extruded at higher pressure. The obtained porous alumina ceramics showed highly oriented cylindrical pores parallel to the extrusion direction. The pore orientation was higher in the oleic acid added pastes than those without oleic acid. The added nylon 66 fibers are mostly converted to pores while maintaining the original shape after sintering. The pore size distribution of the obtained porous ceramics measured by mercury porosimetry method showed a peak at about 4 μm which is apparently smaller than that observed in the SEM photographs and the obtained result is considered to be corresponding to the necks formed by fiber contacts.     

Synthesis and Photocrosslinking Reaction of N-Allylcarbamoylmethyl Cellulose Leading to Hydrogel

Summary The reaction of the carboxymethyl cellulose sodium salt (Na-CMC) (degrees of substitution (DS) = 1.2) with N-hydroxysuccinimide (Su-OH) in the presence of 1-hydroxybenzotriazole and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) was carried out in water to obtain the Su-OH ester of carboxymethyl cellulose, Su-CMC, with the DS values of 0.19 – 1.04. N-Allylcarbamoylmethyl cellulose (Allyl-CMC), which was prepared from the reaction of Su-CMC with an excess amount of allylamine, was crosslinked by UV-irradiation. In addition, the photocrosslinked Allyl-CMC film was swollen with water to form a hydrogel having a relatively high water-swelling property, e.g., the degree of swelling (ds) was ca. 360% for Allyl-CMC with the DS of 0.93.