Design and testing of ITER ECH & CD transmission line components

Initial testing on the Japan Atomic Energy Agency Gyrotron Test Stand of ITER-relevant TL components, has shown reasonable efficiencies, but identified that trapped modes between closely located miter bends, as well as mode conversion at miter bends can lead to excessive heating of the connecting waveguides. General Atomics has designed, built, and will test components to address this issue as well as ITER relevant components that have not been tested at the levels of 1 MW, 170 GHz, for extended pulse lengths. Some of the components that will be tested are ultra low loss miter bends, dc breaks, polarizers, power monitors, bellows, waveguide switches, waveguide cooling clamps, etc. Details of the components and test results will be presented.     

Present status of beryllides for fusion and industrial applications in Japan

Beryllides have remarkable characteristics besides their low density, such as high radiation resistance, high chemical stability, low hydrogen isotope retention and good high temperature mechanical strength especially for fusion applications. In order to have a practical usage for industrial applications, it is important to compile a set of quantitative data on such properties. It is also important to develop fabrication and processing paths to assure the processing of inherently brittle beryllides.The characterization and manufacturing technologies development have been carried out mainly on the Be₁₂Ti interemetallic compounds at the Be-rich side of the Be-Ti binary system. In the present paper, up-dated results on several properties are described for the compound fabricated by hot isostatic pressing (HIP) and ingot metallurgy. Mechanical properties of the compounds having a duplex microstructure with neighboring phases are evaluated by compressive tests from room temperature to 1273 K. Radiation damage of the compound is preliminary studied by charged particle irradiation. Oxidation in air and the interaction with water vapor are evaluated. Thermal desorption of the deuterium is examined by using transmission electron microscopy (TEM) and thermal desorption spectrometry (TDS). Through these evaluations it seems that Be₁₂Ti is superior as neutron multiplier with respect to pure Be metal.     

Effect of Compressive Stress in Tumor Microenvironment on Malignant Tumor Spheroid Invasion Process

In this study, we proposed an in vitro tumor model to simulate the mechanical microenvironment and investigate the effect of compressive stress on the invasion process of malignant tumors. It has been pointed out that the biomechanical environment, as well as the biochemical environment, could affect the transformation of cancer cell migration, invasion, and metastasis. We hypothesized that the solid stress caused by the exclusion of surrounding tissue could transform tumor cells from noninvasive to invasive phenotypes. Colorectal cell spheroids were embedded and cultured in agarose gels of varying concentrations to simulate the earliest stages of tumor formation and invasion. The spheroids embedded in gels at higher concentrations showed peculiar growth after 72 h of culture, and the external compressive loading imposed on them caused peculiar growth even in the gels at lower concentrations. In conclusion, the mechanical microenvironment caused the transformation of tumor cell phenotypes, promoting the growth and invasion of tumor cell spheroids.     

Hydroxylation of fatty acids and alcohols by hepatic microsomal cytochrome P-450 system from the Mongolian gerbil

The liver microsomes of the Mongolian gerbilMeriones unguiculatus catalyzed the hydroxylation of various saturated fatty acids (C₈−C₁₈), alcohols (C₁₂ and C₁₆) and hydrocarbon (C₁₂) to the corresponding ω- and (ω-1)-hydroxy derivatives. Lauric acid was hydroxylated most effectively among saturated fatty acids and the order of activity as hydroxylation substrates was C₁₂>C₁₄>C₁₃>C₁₆>C₁₀>C₁₈>C₈. The specific activity of laurate hydroxylation (5.99 nmol/mg microsomal protein/min) in gerbil liver microsomes was higher than that observed in other species. 1-Dodecanol was also hydroxylated very effectively (4.58 nmol/mg microsomal protein/min) by gerbil liver microsomes, but in general the hydroxylation rates for fatty alcohols were much lower than those for the corresponding acids. It was found from both inhibitor and cofactor studies that the enzyme catalyzing the hydroxylation of fatty acids and alcohols in the liver microsomes of the Mongolian gerbil was a typical cytochrome P-450-linked monooxygenase, and at least two different cytochrome P-450 species were involved in the hydroxylation. Presented in part at the AOCS annual meeting (a joint meeting with the Japan Oil Chemists' Society), Honolulu, Hawaii, May 1986.     

Mechanism of the Photofading of Stilbene–fluorescent Dyes. Contribution of Singlet Oxygen to the Photofading of 4, 4‘–Bisacetamidostilbene

Self—sensitized and Rose Bengal—sensitized photo—oxidation of 4, 4′-bisacetamidostilbene (BAAS) in solution gives p—acetamidobenzaldehyde and p—acetamidobenzoic acid via the reaction of singlet oxygen with the trans isomer (la). The rate of the photo—oxidation is retarded in the presence of effective singlet oxygen quenchers. On the other hand, cls—BAAS (lb) is more stable to visible light under the conditions of Rose Bengal—sensitized photo—oxidation than trans—stilbene.     

Hydrothermal Corrosion of Alumina Ceramics

The corrosion behavior and strength degradation of alumina ceramics with 99%, 99.9%, and 99.99% Al₂O₃ were studied in water at 300°C and 8.6 MPa for 1 to 10 d. The weight loss in alumina ceramics was mainly attributed to the dissolution of SiO₂ and Na₂O grain-boundary impurities. Intergranular corrosion proceeded in the alumina ceramics by preferential attack at the grain boundaries. The extent of the strength reduction for corroded alumina ceramics was related to the impurity level in the alumina ceramics.     

Improvement of light fastness of natural dyes. Part 2: Effect of functional phenyl esters on the photofading of carthamin in polymeric substrate†

The photofading behaviour of carthamin in cellulose acetate film was investigated. A contribution from singlet oxygen to that fading was suggested. Phenyl esters containing nickel sulphonate quenching groups were prepared and the protecting effect of these compounds towards the photofading of carthamin was examined in cellulose acetate film. It is proposed that nickel sulphonate derivatives of phenyl esters can be applied as effective stabilisers against the fading of natural dyes.     

Chemical inhibitors when timing is critical: a pharmacological concept for the maturation of T cell contacts

Cellular signal transduction proceeds through a complex network of molecular interactions and enzymatic activities. The timing of these molecular events is critical for the propagation of a signal and the generation of a specific cellular response. To define the timing of signalling events, we introduce the combination of high-resolution confocal microscopy with the application of small-molecule inhibitors at various stages of signal transduction in T cells. Inhibitors of Src-family tyrosine kinases and actin dynamics were employed to dissect the role of the lymphocyte-specific tyrosine kinase Lck in the formation and maintenance of T cell receptor/CD3-dependent contacts. Anti-CD3epsilon-coated coverslips served as a highly defined stimulus. The kinetics of the recruitment of the yellow fluorescent protein-tagged signalling protein ZAP-70 were detected by high-resolution confocal microscopy. The analysis revealed that at 5 min after receptor engagement, Lck activity was required for maintenance of contacts. In contrast, after 20 min of receptor engagement, the contacts were Lck-independent. The relevance of the timing of inhibitor application provides a pharmacological concept for the maturation of T cell-substrate contacts.     

Application of a Two-Dimensional Computer Simulation to Cake Growth in Slip Casting with Complicated-Shape Gypsum Molds

A two-dimensional computer simulation method, developed by the authors using the method of finite differences, was applied to estimate the cake growth in slip casting of alumina with a triangular gypsum mold and a box-type gypsum mold with a convex bottom. The cake growth patterns, water penetration patterns, water flow rate distributions, and pressure distributions were simulated in the molds and/or cakes. The simulated cake growth patterns were in good agreement with those observed experimentally in both molds. Moreover, the cake growths could be well understood from the results of the water flow rate distributions in each case. The present method is applicable to cake growth simulation in slip casting with complicated-shape gypsum molds.