Application of functionally graded material for solid insulator in gaseous insulation system

Functionally graded materials (FGM) have spatial distribution of a material property in order to achieve efficient stress control. An application of the FGM to a solid insulator (spacer) for a gaseous insulation system, like gas insulated switchgear, is expected to improve electric field (E-field) distribution around the spacer. In this paper, we describe the applicability of the FGM spacer to gas insulated power equipment. In the FGM spacer, we gave spatial distribution of dielectric permittivity to control the E-field distribution inside and outside the spacer. This paper includes following key results for the applications of the FGM. Firstly, E-field simulation results when applying the FGM by a finite element method are presented, in which we show the effective reduction of the maximum field strength by applying the FGM. Next, a fabrication technique of the FGM spacer sample with not only step-by-step but also continuous changes of permittivity is presented by use of centrifugal force. Finally, dielectric breakdown tests using FGM samples which are accurately controlled the spatial distribution of permittivity are carried out under lightning impulse voltage applications. The test result indicates the increase of breakdown voltage (BDV). From these results, we verified the applicability and the fabrication technique of FGM spacer for improvement of the dielectric strength in the gaseous insulation system.     

Thermal cis–trans conversion in thiophene oligomers

Thermal cis–trans conversion has been examined in oligothiophene single molecules encapsulated in the molecular vessels of cyclodextrin and Na-mordenite. At high temperatures, optical absorption intensities are enhanced in bithiophene, terthiophene and quinquethiophene, while the intensity of quarterthiophene is temperature independent. Optical absorption comes from uncompensated transition dipole moment due to the thermal torsion between cis and trans forms.     

Quantum Lattice-Gas Automata Simulation of Electronic Wave Propagation in Nanostructures

We report the two- and three-dimensional quantum lattice-gas automata simulation for one-particle electronic wave propagation in nanostructures. The transmission coefficient of the electronic wave through the two-dimensional quantum point contact is investigated taking account of the surface roughness of the confinement wall. It is demonstrated that the electron transmission is significantly affected by the surface roughness pattern even if the same roughness parameter is assumed. We also perform the three-dimensional simulation, and the wave propagation in the structure like an ultrathin-body MOSFET is visualized.     

Efficient power regeneration and drive of an induction motor by means of optimal torque derived by the variational method

When the motor speed is reduced by using a regenerative brake, the mechanical energy of rotation is converted to electrical energy. When the regenerative torque is large, the corresponding current increases so that the copper loss also becomes large. On the other hand, the damping effect of rotation increases with time when the regenerative torque is small. In order to use this limited energy effectively, the optimal regenerative torque should be ascertained in order to maximize the regeneration of electrical energy. This paper proposes a methodology, based on the variational method, for the design of regenerative torque for an induction motor in order to maximize the regenerative electric energy. Similarly, the optimal torque for acceleration is derived in order to minimize the driving energy. Finally, an efficient motor drive system with the proposed optimal torque and a power storage system stabilizing the DC link voltage will be proposed. The effectiveness of the proposed methods is illustrated by simulations and experiments. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(1): 41–50, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.21010     

Removal of NF3 from semiconductor-process flue gases bytandem packed-bed plasma and adsorbent hybrid systems

A tandem hybrid gas cleanup system, consisting of a BaTiO₃ packed-bed plasma reactor and a CaCO₃ adsorbent filter, was used to study the removal of NF₃ from semiconductor-process flue gases. Plasma-chemical kinetics of N₂ -NF₃-O₂-H₂ gas mixtures suggested byproducts observed in the experiments. The laboratory-scale system showed NF₃ removal at atmospheric pressure. Typically, 100% NF₃ abatement was achieved with an inlet concentration of 5000 ppm and a gas residence time in the reactor less than 10 s     

Effect of gamma-ray irradiation on the TSC in polyethersulfone

When polyethersulfone was irradiated by γ rays and then poled at 37°C, a new TSC (thermally stimulated current) peak appeared at ~100°C. This new peak and other peaks near 40 and 150°C increase with an increase in dose of ~0.6 kGy, and this is considered to be due to trapped charges and other ionic carriers becoming mobile when rearrangement of scissioned chains occurs. However, if the dose exceeds 0.6 kGy, the peak magnitude decreases. Furthermore, if the TSC was poled at 120°C, only the peak near 150°C appeared and this peak monotonically decreased with an increase in the irradiation dose. A similar decreasing tendency was also observed in the conduction current and in the residual voltage. These decreasing features are considered to be caused by the radiation-induced change that rearrangement of scissioned chains decreases free volume for ionic transport     

Real-time and high-speed measurements of charging processes on dielectric surface in vacuum

In order to investigate the charging mechanisms of solid dielectrics in vacuum, we constructed real-time and high-speed measurement systems for charge density, current pulse, light emission and applied voltage. By applying a negative DC ramped voltage to an electrode with a cathode triple-junction (TJ), we measured the temporal variation of surface charge accumulation and current pulse waveforms expressing the electron emission from TJ, by electrostatic probes. From the measurement results, we explain the step like charging process and propose an electron emission model by taking the electric field and its relaxation by charging into account. In addition, we elucidate the relationship between the charging process and the location of electron emission.     

Charge behavior in flowing oil in oil/ pressboard insulation system by electro-optic field measurement

The electrical insulation structure of most power transformers is a combination of insulating oil and solid materials. One of the crucial problems we face in transformer operation is flow electrification, which occurs at a flowing oil/solid material interface. Thus, for the transformer insulation design, we need to clarify the now electrification phenomena. In this paper, we measured the electric field strength in an oil/pressboard composite insulation system using an electro-optic method of the Kerr effect. We obtained the time variation of electric field distribution in both flowing uncharged and charged oil. It is notable that we could quantitatively clarify the electric field distortion in flowing charged oil by flow electrification. Furthermore, we measured the leakage current from divided electrodes and derived a charge density distribution along the flow direction. Finally, we quantitatively discussed the electric field distribution and the charge behavior from the measurement results.     

Full Band Monte Carlo Study for Two-Dimensional Hole Transport in Strained Si p-MOSFETs

Transport properties of the two-dimensional hole gas in inversion layer of strained Si/SiGe p-MOSFETs are investigated using the full-band Monte Carlo simulator based on the nonlocal pseudopotential calculation. The hole mobility is significantly enhanced by the strain in the case of Ge content of ≥20%. Moreover, we also present the high-field transport characteristics of 2D holes. In contrast to the low-field mobility, the hole saturation velocity does not significantly enhanced by the strain.     

Route guidance by a car navigation system based on augmented reality

Car navigation systems play a prominent role in road traffic safety and traffic regulation. However, it is necessary to improve the route guidance of car navigation systems so that they accurately and quickly recognize small differences in location. Thus, to increase the ease of understanding and safety of car navigation systems, navigation systems based on augmented reality have been proposed for providing guidance at road intersections. We are currently developing a car navigation system based on augmented reality, called AR‐Navi. We investigated designs for the display of road intersection guidance that can be easily understood even when limited information is available and proposed a “best shot” display method that does not use moving images. In addition, we implemented a prototype system that includes these methods and conducted driving experiments on public roads to evaluate the ease of understanding and safety of AR‐Navi. Using the evaluation results, we confirmed that the ease of understanding and safety is similar in the case of AR‐Navi and CG‐Navi. We also clarified the characteristics of AR‐Navi. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(2): 43–54, 2012; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22278