Effect of fatty acids on the strain‐induced crystallization of natural rubber detected by tear energy measurements

The strain‐induced crystallization of natural rubber (NR) was investigated by the measurement of the tear energy of a crosslinked blend consisting of NR and noncrystalline styrene–butadiene rubber (SBR). When NR was dispersed into the SBR matrix, the tear energy of SBR increased at various temperatures and tear rates. After the application of the principle of time–temperature superposition to the tear energy according to the Williams–Landel–Ferry equation, two distinct curves were found for the NR/SBR blend with respect to the reduced tear rate, despite the fact that the tear energy of SBR or the SBR/SBR blend gave its own single composite curve. When the fatty acid in the NR/SBR blend was removed by acetone extraction, the tear energy of the blend drew a single composite curve. The conversion of the two curves into the single composite curve for the NR/SBR blend suggested that the tear energy depended on the strain‐induced crystallization of NR dispersed in the SBR matrix, which was suppressed by the removal of the fatty acid. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 613–619, 2005     

Enhanced Immunostimulatory Activity of Covalent DNA Dendrons

The present study focused on the design and synthesis of covalent DNA dendrons bearing multivalent cytosine-phosphate-guanine oligodeoxynucleotides (CpG ODNs) that can stimulate the immune system through the activation of TLR9. These dendrons were synthesized using branching trebler phosphoramidite containing three identical protecting groups that enabled the simultaneous synthesis of multiple strands on a single molecule. Compared with linear ODNs, covalent DNA dendrons were found to be more resistant to nuclease degradation and were more efficiently taken up by macrophage-like RAW264.7 cells. Cellular uptake was suggested to be mediated by macrophage scavenger receptors. The covalent DNA dendrons composed of multivalent immunostimulatory branches enhanced the secretion of proinflammatory cytokines TNF-α and IL-6 from RAW264.7 cells, and 9-branched DNA dendrons showed the highest enhancement. Given their enhanced efficacy, we expect covalent DNA dendrons to be useful structures of oligonucleotide medicines.     

The metabolism and distribution of docosapentaenoic acid (n−6) in rats and rat hepatocytes

In this study, a new marine oil that contains 45% docosahexaenoic acid (DHA, 22∶6n−3) and 13% docosapentaenoic acid (DPA, 22∶5n−6) was administered to rats. The metabolism and distribution of DPA in rats was investigated. In experiment 1, the effects of DHA and n−6 fatty acids (linoleic acid, I A; arachidonic acid, AA; and DPA) on AA contents were investigated in vivo. LA group: LA 25%, DHA 30%; LA-DPA group: LA 15%, DPA 10%, DHA 35%; LA-AA-DPA group: LA 10%, AA 5%, DPA 10%, DHA 35% were administered to rats for 4 wk. In the liver, the AA content in the LA-DPA and LA-AA-DPA groups was significantly higher than in the LA group. The decreased AA contents in the LA group might be caused by DHA administration. Although DHA also was administered in the LA-DPA and LA-AA-DPA groups, the AA contents in these two groups did not decrease. These results suggested that DPA retroconverted to AA, blunting the decrease in AA content caused by DHA administration. To conduct a detailed investigation on DPA metabolism and its relation with AA and DHA, rat hepatocytes were cultured with pruified DPA and DHA for 24 h. We discovered the retroconversion of DPA to AA occurred only when AA content was decreased by a high DHA administration; it did not occur when AA content was maintained at a normal level.     

On attributes of achromatic and chromatic object‐color perceptions

Adapting luminance dependencies of various color attributes of object colors (lightness, brightness, whiteness‐blackness, whiteness‐blackness strength, chroma, and colorfulness) were clarified under white illumination with various adapting illuminances. The correlation between the perceptions of lightness and brightness and those of whiteness‐blackness and whiteness‐blackness strength is also clarified for achromatic object colors. The difference between the increase of brightness and that of whiteness‐blackness contrast (the effect studied by Stevens and Jameson—Hurvich) by raising their adapting illuminance is resolved without any contradiction. It is also shown that the nonlinear color‐appearance model developed by the author and his colleagues is able to explain the complex characteristics of all the above color attributes of object colors by making minor modifications to it. In addition, two kinds of classifications of various color attributes are given; one is based on the similarity of perception level, and the other on the degree of adapting illuminance dependency. © 2000 John Wiley & Sons, Inc. Col Res Appl, 25, 318–332, 2000     

Design and Fabrication of a Novel Electrode-Supported Honeycomb SOFC

We report the design and fabrication of a novel electrode-supported honeycomb solid oxide fuel cell (SOFC), that can generate high volumetric power density. Among various cell designs, honeycomb SOFCs are suitable for compact SOFC modules because they have a large surface electrode area per unit volume. We have succeeded in fabricating a cathode-supported honeycomb SOFC via extrusion of a LaSrMnO₃ honeycomb monolith and through the use of a new slurry injection method for the channel surface coating using electrolyte/anode bi-layers. The fabricated honeycomb SOFCs exhibited high volumetric power densities of approximately 1.2 W/cm³ at 600°C under a wet H₂ fuel flow.     

Effect of Lipase Activity and Specificity on the DAG Content of Olive Oil from the Shodoshima-Produced Olive Fruits

Olive oils have a higher relative diacylglycerol (DAG) content than other plant oils. The lipase in olive fruits is involved in DAG production and is directly related to the acidity of the olive oil. However, the lipase activity and positional selectivity have not been clarified. To investigate the properties of olive fruit lipase, olive fruits of the Mission variety harvested during mid-December of 2005 on Shodoshima Island (Japan) were stored at 20, 30 or 40 °C for 4 weeks. Changes in the acidity and acylglycerol content of the oils extracted from the stored fruits were analyzed. The acidity and DAG content of the olive oils increased due to triacylglycerol (TAG) hydrolysis during storage. sn-1,2-DAGs preferentially increased during the early stages of storage, indicating that the olive fruit lipase is enantioselective for the sn-3 position, while non-enzymatic isomerization of sn-1,2-DAGs was observed throughout the entire duration of storage. Kinetic analysis revealed that the enantioselectivity of olive fruit lipase for the sn-3 position was approximately four times greater than for the sn-1 position. The lipase was gradually inactivated at temperatures of 30 °C or higher, and the ratios of the rate constant for inactivation to TAG hydrolysis at the sn-3 position was 0.2, 13, and 23 at 20, 30, and 40 °C, respectively.     

Development of cube-type SOFC stacks using anode-supported tubular cells

Tubular SOFCs have shown many desirable characteristics such as high thermal stability during rapid heat cycling and large electrode area per unit volume, which can accelerate to realize SOFC systems applicable to portable devices and auxiliary power units for automobile. So far, we have developed anode-supported tubular SOFCs with 0.8–2 mm diameter using Gd-doped CeO₂ (GDC) electrolyte, NiO-GDC anode and (La, Sr)(Co, Fe)O₃ (LSCF)-GDC cathode. In this study, a newly developed cube-type SOFC stack which consists of three SOFC bundles was designed and examined. The bundle consists of three 2 mm diameter tubular SOFCs and a rectangular shaped cathode support where these tubular cells are arranged in parallel. The performance of the stack whose volume is less than 1 cm³ was shown to be 2.8 V OCV and over 1 W at 1.6 V under 500 °C. Cathode loss factor due to current collection from cathode matrix was also estimated using a proposed model.     

TEM/STEM Observation of ZrC Coating Layer for Advanced High-Temperature Gas-Cooled Reactor Fuel, Part II

The Japan Atomic Energy Agency (JAEA) has started to study and develop zirconium carbide (ZrC)-coated fuel particles for advanced high-temperature gas-cooled reactors. The ZrC coating layer has been fabricated at JAEA by chemical vapor deposition using a pyrolytic reaction of zirconium bromide. The microstructures of the ZrC layers, whose nominal deposition temperatures could be measured and controlled during the deposition process, were characterized by means of TEM and STEM. In the present study, three batches were prepared and compared with each other as well as the previous batches. The crystallographic orientation of ZrC with regard to the growth direction in the ZrC layers deposited at a constant temperature of 1630 K was different from that deposited at varying temperatures in the 1493–1823 K range. A thin layer of turbostratic carbon was observed at the boundary between pyrolytic carbon and ZrC in particles deposited at the highest temperature among those used in this study (the nominal temperature was 1769 K); no such structure was found in a batch deposited at a lower temperature (the nominal temperature was 1632 K). Therefore, precise control of temperature is shown to be critical to the formation of good ZrC coatings.     

Forced vibration tests and simulation analyses of a nuclear reactor building

Forced vibration tests were carried out at the Hamaoka (BWR) Unit 4 R/B (reactor building) in Japan in April and May of 1992. Fundamental dynamic characteristics of the R/B were obtained, including its interaction with the adjacent T/B (turbine building) and the soil–structure interaction. Results for the preceding R/Bs are compared, and probable causes for fluctuations in the resonance curve around the 1st peak are discussed. Furthermore, simulation analyses of the fundamental dynamic characteristics of the soil–structure system were conducted, using a basic lumped-mass soil–structure model (lattice model), and strong correlation with the measured data was obtained. Other detailed simulation models were employed to investigate the effects of simultaneously induced vertical response and response of the adjacent turbine building on the lateral response of the reactor building.     

Nanotribology of Si oxide layers on Si by atomic force microscopy

Atomic force microscopy (AFM) has been used for tribological studies of Si surfaces covered by oxide layers of various kinds: chemical oxides prepared by the SC1 (NH4OH/H2O2/H2O) and the SC2 (HCl/H2O2/H2O) treatments and a thermal oxide. In the case of the SC1 chemical oxide, the oxide layer was scratched and the underlying Si substrate was ploughed by the Si3N4 AFM tip. On the other hand, no wear of the sample was noted on the other surfaces: the AFM often produced elevated patterns in the shape of the scanned area, which were no longer visible after HF etching. By annealing the SC1-treated surface in N2 gas at above 200 degrees C for 30 min, the oxide layer could not be scratched any more. By soaking the thermal oxide in KOH, the oxide layer was then scratched. It is concluded that the presence of OH bases is the necessary condition for the nano-scratching of the oxide layers.