Mechanical stress effect on oxygen ion mobility in 8 mol% yttria-stabilized zirconia electrolyte

In the present study, the effect of mechanical tensile stress on oxygen mobility in 8 mol% yttria-stabilized zirconia (8YSZ) was investigated. The experimental results show that the ionic conductivity increases with stress and saturates. The maximum improvement in the conductivity was about 18% observed at 973 K. The simulation results show that the diffusion coefficient increases with stress and decreases with excessive stress. The maximum improvement was about 40% observed at 973 K. The improvement was larger at lower temperatures in both the experiment and the simulation. The strain caused by the stress is considered to have caused the gradient in the potential energies of the neighbouring oxygen sites, especially around the yttrium ions, which probably facilitated the migration of the oxygen ions.     

Ultra Low-Dose Radiation: Stress Responses and Impacts Using Rice as a Grass Model

We report molecular changes in leaves of rice plants (Oryza sativa L. - reference crop plant and grass model) exposed to ultra low-dose ionizing radiation, first using contaminated soil from the exclusion zone around Chernobyl reactor site. Results revealed induction of stress-related marker genes (Northern blot) and secondary metabolites (LC-MS/MS) in irradiated leaf segments over appropriate control. Second, employing the same in vitro model system, we replicated results of the first experiment using in-house fabricated sources of ultra low-dose gamma (γ) rays and selected marker genes by RT-PCR. Results suggest the usefulness of the rice model in studying ultra low-dose radiation response/s.     

Organic Analysis of Peridotite Rocks from the Ashadze and Logatchev Hydrothermal Sites

This article presents an experimental analysis of the organic content of two serpentinized peridotite rocks of the terrestrial upper mantle. The samples have been dredged on the floor of the Ashadze and Logatchev hydrothermal sites on the Mid-Atlantic Ridge. In this preliminary analysis, amino acids and long chain n-alkanes are identified. They are most probably of biological/microbial origin. Some peaks remain unidentified.     

Comparison of the SiH4---C2H4 and SiH2Cl2---C2H4 systems during the synthesis of silicon carbide ultrafine particles by laser-induced gas-phase reaction

The synthesis conditions of SiC ultrafine particles from SiH₄ and C₂H₄ using a CO₂ laser were studied and a comparison was made between SiH₄---C₂H₄ and SiH₂Cl₂---C₂H₄ systems. Ultrafine SiC particles were synthesized by irradiating a SiH₄ and C₂H₄ gas mixture with a CO₂ laser at atmospheric pressure. SiC particles were obtained at a laser power of more than 0·92 kW/cm².

The behavior of the reaction flame temperature and the extent of the laser light absorption by SiH₄---C₂H₄ was different from that of SiH₂Cl₂---C₂H₄, although an abrupt temperature increase was observed in both cases. In the case of SiH₄---C₂H₄ an abrupt increase in the laser light absorption was not observed, whilst it was observed in the case of SiH₂Cl₂---C₂H₄. This difference resulted from the difference in liability to form solid carbon particles.     

Preparation of Ba(Mg1/3Ta2/3)O3 Using Oxine

A solution containing Mg²⁺ and Ta⁵⁺ was added to an aqueous ammonia solution of oxine, resulting in a precipitate. After the precipitate was thermally decomposed and fired, it was mixed with BaCO₃ powder and fired again at high temperatures to obtain Ba(Mg_1/3Ta_2/3)O₃ (BMT). This method resulted in BMT formation at temperatures lower than those used in the conventional mixed-oxide method, and single-phase BMT formed directly at 1300°C without intermediates.     

Characterization of Silicon Carbide–Silicon Nitride Composite Ultrafine Particles Synthesized Using a CO2 Laser by Silicon-29 Magic Angle Spinning NMR and ESR

The structure of silicon carbide–silicon nitride (SiC–Si₃N₄) composite particles synthesized using a CO₂ laser was studied by magic angle spinning nuclear magnetic resonance (MAS-NMR) and electron spin resonance (ESR). The structure around Si atoms changed by introducing N. C atoms around Si were substituted by N atoms, and N-rich configurations around Si atoms increased stepwise as the N content increased. The low N content composite particles consisted of mainly SiC phase containing dissolved N. N atoms were partly present in β-SiC microcrystal and partly in the grain boundary layer in the particle. N atoms were tetrahedrally surrounded by four Si atoms in β-SiC microcrystal and were trivalent state bonded to three Si atoms in the grain boundary layer. The high N content particles consisted of SiC, Si₃N₄, and amorphous phases, whose amount depended on N content.     

Synthesis of Compositionally Homogeneous Sr(CuxZn1−x)1/2W1/2O3

A complex perovskite of Sr(Cu _x Zn_{1- x} )_1/2 W_1/2O₃ (SCZW) is synthesized by a new combination of wet and dry processess. Mixed oxides containing Cu²⁺ and Zn²⁺ (CZ) are prepared by the wet process (coprecipitate method). SCZW is obtained by the dry process (mixed-oxide method) from a mixture of CZ, SrCO₃, and WO₃. SCZW has practically no compositional, unlike solid solutions prepared by the conventional dry method. The wet–dry process method is useful because the wet process is applied to only B-site cations having the same valence.