Effect of sintering additive on crystallographic orientation in AlN prepared by slip casting in a strong magnetic field

The preparation of oriented AlN bulk ceramics with and without additives was achieved by slip casting in a high magnetic field. The a and b axes of the AlN were aligned parallel to the direction of the magnetic field. The degree of crystallographic orientation was controlled by the viscosity of the slurry and the grain growth during sintering attributed to the sintering additives. The mechanical properties of the textured AlN depended on the direction of the crystallographic orientation.     

An experimental study on moisture transport through a porous plate with micro pores

An experiment was carried out to examine heat and mass transfer between constant-temperature water and dry air through a porous plate having extremely small pores. The effects of the thermal conductivity in the porous plate on moisture transport were investigated. The controlling factor for moisture transport was found to be the thermal resistance inside the porous plate having a low-thermal-conductivity and the heat transfer at the surface of the porous plate having a high-thermal-conductivity.     

Synthesis of optical quality ZnO nanowires utilizing ultrasonic spray pyrolysis

ZnO nanowires were grown by an ultrasonic spray pyrolysis technique. The aspect ratio and size of the wire were dependent mainly on the pH value of a precursor solution and the growth temperature. By high-resolution transmission electron microscopic analysis and photoluminescence measurements, it was confirmed that the nanowires are monocrystalline with good optical quality.     

Microstructure of a Molybdenum Nitride Layer Formed by Nitriding Molybdenum Metal

For pure molybdenum nitrided at 1373 K in NH₃ gas, microstructural observations of a molybdenum nitride layer were conducted through a transmission electron microscope. The molybdenum nitride layer consisted of two molybdenum nitrides: an outer one of γ-Mo₂N and an inner one of β-Mo₂N. A great number of (011)[0     1] type twins were observed in the β-Mo₂N phase, whereas the microstructure of the γ-Mo₂N phase was almost free from lattice defects except for slightly observed {111}〈112〉 type twin.     

Liquid lithium divertor system for fusion reactor

One of the most critical issues for the steady state fusion reactor is the heat flux in the divertor target. This paper proposes a liquid lithium divertor system to solve this problem. The proposed divertor system consists of a liquid lithium target, an evaporation chamber and a differential evacuation chamber. The heat coming from the fusion plasma along the divertor leg is removed by evaporation of lithium. The lithium vapor is condensed on the wall and is circulated with a pump. The coolant temperature for the wall is high enough to drive a power generator. Narrow slits along the divertor leg and the differential evacuation chamber reduce leakage of lithium vapor to the plasma chamber. A preliminary estimation predicts that the lithium ion density in the core plasma is lower than the plasma density.     

Application of SPRT to an image data sequence for a remote monitoring system

Recently, remote monitoring camera systems have been widely used for security. In such systems, one important function is that the system automatically detects any change in the scenes from the monitoring cameras. In wireless remote monitoring camera systems, the images of the scenes are generally transmitted as compressed data (e.g., JPEG file), because of the capacity of the wireless channel. This article shows the automated detection of the change point in time-series data of compressed JPEG file quantity (Kbytes) from the monitoring camera by applying the sequential probabilistic ratio test (SPRT) and the Chow test, which is well known as a standard method for detecting structural change in time-series data.     

Calcium oxide/carbon dioxide reactivity in a packed bed reactor of a chemical heat pump for high-temperature gas reactors

The thermal performance of a chemical heat pump that uses a calcium oxide/carbon dioxide reaction system was discussed as a heat storage system for utilizing heat output from high temperature gas reactors (HTGR). Calcium oxide/carbon dioxide reactivity for the heat pump was measured using a packed bed reactor containing 1.0 kg of reactant. The reactor was capable of storing heat at 900 °C by decarbonation of calcium carbonate and generating up to 997 °C by carbonation of calcium oxide. The amount of stored heat in the reactor was 800–900 kJ kg⁻¹. The output temperature of the reactor could be controlled by regulating the carbonation pressure. The thermal storage performance of the reactor was superior to that of conventional sensible heat storage systems. A heat pump using this CaO/CO₂ reactor is expected to contribute to thermal load leveling and to realize highly efficient utilization of HTGR output due to the high heat storage density and high-quality temperature output of the heat pump.     

Thermally assisted recording of holographic gratings in semicrystalline azobenzene-containing polymers

We examine optically induced birefringence in semicrystalline azopolymer films that are held at glass-transition temperature Tg. The birefringence increases markedly after interception of the pump beam; the saturation value depends on exposure time. In addition, the induced birefringence is completely erased by irradiation with a circularly polarized beam at Tg. Using this thermally assisted method, we demonstrate the holographic recording of a test image. The intensity of the diffracted beam also increases after interception of the writing beams. Furthermore, the retrieved image is found to have a resolution of approximately 30 lp/mm. This resolution is comparable with that of the optical setup that is used. Accordingly, the thermally assisted recording by use of semicrystalline azopolymers is a promising method for reversible holographic storage.