Effect of Ganglioside GM3 Synthase Gene Knockout on the Glycoprotein N‐Glycan Profile of Mouse Embryonic Fibroblast

The structural and clinical significance of cellular glycoproteins and glycosphingolipids (GSLs) are often separately discussed. Considering the biosynthetic pathway of glycoconjugates, glycans of cell‐surface glycoproteins and GSLs might partially share functions in maintaining cellular homeostatis. The purpose of this study is to establish a general and comprehensive glycomics protocol for cellular GSLs and N‐glycans of glycoproteins. To test the feasibility of a glycoblotting‐based protocol, whole glycans released both from GSLs and glycoproteins were profiled concurrently by using GM3 synthase‐deficient mouse embryonic fibroblast GM3(?/?). GM3(?/?) cells did not synthesize GM3 or any downstream product of GM3 synthase. Instead, expression levels of o‐series gangliosides involving GM1‐b and GD1‐α increased dramatically, whereas a‐/b‐series gangliosides were predominantly detected in wild‐type (WT) cells. We also discovered that glycoprotein N‐glycan profiles of GM3(?/?) cells are significantly altered as compared to WT cells, although GM3 synthase is responsible only for GSLs synthesis and is not associated with glycoprotein N‐glycan biosynthesis. The present approach allows for high‐throughput profiling of cellular glycomes enriched by different classes of glycoconjugates, and our results demonstrated that gene knockout of the enzymes responsible for GSL biosynthesis significantly influences the N‐glycans of glycoproteins.     

Surface modification of contact lenses using adsorption of ethylene oxide branched copolymers

To examine methods for reducing the amount of adsorbed protein on the surface of contact lenses during use, cationic copolymers containing poly(ethylene oxide) units were synthesized and evaluated as surface modifiers. Poly(ethylene oxide) graft‐branched copolymers of composition 70 mol % dimethylaminoethyl methacrylate (DM) and 30 mol % methoxy polyethylene glycol methacrylate (Mp0G; p = 2, 4, 9; the average number of the ethylene oxide units) were obtained using nonionic monomers containing poly(ethylene oxide) units. The copolymers very efficiently prevented protein adsorption on a contact lens. Contact angle measurements showed that immersion in tear fluid made the lens surface hydrophobic because of adsorption of proteins with hydrophobic residues. The copolymer pretreatment made the lens surface hydrophilic, even after dipping in artificial tear fluid. These results suggest that adsorption of the poly(ethylene oxide) branched copolymer on the contact lens would make the lens surface hydrophilic and prevent protein adsorption. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Centrifugal Filter for Aerosol Collection

Air filters collect particles by the mechanical collection mechanisms, namely, inertia, interception, gravitational settling, and Brownian diffusion. There exists the most penetrating particle size (MPPS) in submicron size range for which none of the collection mechanisms work effectively. In this study, we propose a new type of filter named as “centrifugal filter,” which collects aerosol particles by centrifugal force together with the conventional mechanical collection mechanisms. The centrifugal filter proposed in the present work may be rotated by a motor or compressed air. Air passes through the filter in the axial direction of filter rotation. The filter rotates so does the air embedded in the filter, and therefore centrifugal force exerts on particles. In addition to the mechanical collection mechanisms, small migration of particles due to the centrifugal force enhanced the collection efficiency of submicron particles significantly without increasing the pressure drop. The performance tests of centrifugal filter were conducted by changing the fiber diameter, the air flow velocity and the rotation speed. We found that the collection efficiency of filter is enhanced significantly by rotating the filter without increasing the pressure drop and that the filter efficiency is well predicted by the conventional filtration theory accounting for the centrifugal force.

Copyright 2015 American Association for Aerosol Research     

Sonochemical Preparation and Properties of Pt–3Y-TZP Nano-Composites

A uniformly aggregated 3 mol% yttria-stabilized tetragonal zirconia nano-powder (3Y-TZP) was prepared using thermal hydrolysis and the ultrasonic deagglomeration technique. The possibility of nano-engineering of Pt–3Y-TZP composite aggregates was studied. The as-synthesized Pt nano-particles (∼2 nm) were impregnated into zirconia nano-aggregates (20–45 nm). The morphology manipulation technique allowed production of the composite zirconia-based aggregates in which a significant fraction of the Pt particles was embedded into the densified zirconia aggregates. Using the colloidal technique and low-temperature (1150°C) sintering, we prepared the Pt-zirconia (0.5–1.5 wt% of platinum) nano-composites with average 3Y-TZP grain sizes of 120 nm, and with the platinum grains size in the range of 20–60 nm. The catalytic properties of composite Pt–3Y-TZP nano-composites were studied and described.     

Photocatalytic microreactor study using TiO2-coated porous ceramics

Two kinds of porous ceramic disks, having through-holes with diameters of 0.1 and 0.05 mm, were coated with TiO₂ using two different starting solutions: titanyl(IV)acetylacetonate and a commercial titania sol (STS-01). The morphology of these porous ceramics before and after TiO₂ coating was observed by SEM. The TiO₂-coated porous ceramics were examined as honeycomb photocatalytic microreactors. The photocatalytic activity was evaluated using the decomposition of methylene blue solution for radiation angles of 0° and 10° with respect to the pore axis. The highest photocatalytic activity was obtained for the porous ceramic having the pore diameter of 0.1 mm, coated with titanyl(IV)acetylacetonate and irradiated with a light angle of 0° with respect to the pore axis.     

Catalytic etching of {100}-oriented diamond coating with Fe, Co, Ni, and Pt nanoparticles under hydrogen

Etching of a highly {100}-oriented diamond coating, {100}HODC, with hydrogen gas using Fe, Co, Ni, and Pt nanoparticles as a catalyst was examined at high temperatures over 700 °C by high-resolution scanning electron microscopy and Raman spectroscopy. The metal atoms vacuum-evaporated onto the {100}HODC formed nanoparticles themselves when heated at high temperatures; e.g. 700 °C, in a flowing gas mixture of H₂ (10%) + N₂ (90%). At 800 °C, short nano-channels and etch pits holding metal nanoparticles were formed by Fe, Co, and Ni. The shapes of the Co and Ni nanoparticles in the etch pits were affected by the shape of the etch pits; reversed pyramidal shape. On the other hand, the top view of the Fe nanoparticles embedded in the etch pits showed a distorted round shape, probably due to the formation of something such as iron carbide, while the carbon content was unknown. Apparently, etching of the {100}HODC by Pt nanoparticles was observed after the treatment at 1000 °C. The difference in the catalytic etching behavior among these metal particles, the potential etching mechanism of diamonds with hydrogen by metal nanoparticles, probably as melted metal nanoparticles, and the formation mechanism of vacant etch pits were discussed.     

The electrical delivery of a sublimable II–VI compound by vapor transport in carbon nanotubes

Progress in the field of femtogram (10⁻¹⁵ g) mass delivery relies on finding dependable transport vehicles and uncomplicated methods to tailor the deposition of active substances. Here, current-conductive containers consisting of turbostratic carbon nanotubes were used to store a light-emitting ternary alloy and guide its delivery on demand. We found that the electrically-activated delivery process of this sublimable compound, performed inside a transmission electron microscope, was highly dependent on factors such as the substrate type and current injection mode. Furthermore, our observations suggest that the alleged “missing matter” problem is not solely due to surface migration. Besides extending the field of electrical delivery to the realm of functional materials, the extrusion and mass transport of a sublimable II–VI compound demonstrates that it is possible to guide vapor migration using a carbon nanotube support.     

Hydrothermal flames in supercritical water oxidation: investigation in a pilot scale continuous reactor

Hydrothermal flames at 25 MPa supercritical water environment were investigated using a 4800 ml reaction tower, in which the sapphire windows were fitted for optical access. Down flowing hydrothermal flames were observed for oxidation of 2-propanol when the reactor was fed with inlet organic concentration higher than 2 vol% and air ratio higher than 1.8. Flame temperature, as high as 1100 °C, was measured by means of a thermocouple and the temperature was found to be strongly influenced by air ratio. Effective and stable oxidation of organics with TOC removal rate of 99.9% was achieved. Dioxins were also decomposed with a ratio higher than 99.9%, within 1 min reaction time in this reactor configuration.