Transformation of Lower Alkanes into Aromatic Hydrocarbons over ZSM-5 Zeolites

Much attention has been paid to the transformation of lower alkanes such as propane and butanes into aromatic hydrocarbons from both industrial and academic points of view. The aromatic hydrocarbons can be utilized as a booster for high octane number gasoline and are fundamental raw chemicals in petroleum chemistry. The activation of lower alkanes is an intriguing subject. In early work, Csicsery [1-5] described dehydrocyclodimerization of lower alkanes over bifunctional catalysts such as platinum on alumina and Cr₂O₃ on alumina.     

Application of chrysotile-derived polymer to microlithography

A novel silicon-containing polymer, SCMR (silylated clay minerals resist), has been developed for microlithography. SCMR was synthesized by reaction of the silicate sheet of chrysotile with dimethylvinylchlorosilane (DMVCS) and/or trimethylchlorosilane (TMCS). The structure of SCMR is estimated as a mixture of R₁R₂R₃SiO, SiO₃(OH), and SiO₄ (R₁, R₂, R₃: methyl or vinyl group). The silicon content of SCMR is 40–45 wt% and its O₂-RIE resistance is 50 times as high as that of a novolak-based photoresist. SCMR has a high thermal stability and its profiles are not changed up to 300°C. SCMR is a negative working E-beam resist and has a high sensitivity, 2 µC/cm², and a high resolution, 0.2-µm line and space. CMPR (clay minerals positive resist), consisting of SCMR and an acid generator, has been developed for a positive working E-beam resist. It has a high sensitivity, 0.2 µC/cm².     

Intramolecular triplet energy migration in poly(2-vinylnaphthalene) and poly(naphthylalkyl methacrylate)s in solid solution: Effects of side chain length

Summary The effect of side chain length on intramolecular triplet energy migration of naphthalene containing polymers was investigated by a delayed fluorescence (DF) spectroscopy for the solid solution of the polymers. The degree of triplet energy migration depends strongly on whether the chromophores are directly attached to the main chain or not.     

Junction properties of polypyrrole containing a small amount of poly(ethylene oxide) with indium

A method to generate a porous region near the surface of a polymer is suggested. In this method the region near the surface is swollen by immersing the polymer for a short time in a solvent. Subsequently, the polymer is introduced in a nonsolvent (for the polymer) that is, however, miscible with the solvent. The formation of the porous region is a result of (1) the swelling accompanied by the disentanglement of the surface molecular chains, and the dissolution of some of them during the immersion in the solvent, and (2) the rapid extraction of the solvent from the swollen region by the nonsolvent. The porous surface provides a matrix into which a second incompatible monomer can be polymerized so that the two otherwise incompatible polymers can adhere to one another.     

Fabrication of Transparent Lead Lanthanum Zirconate Titanate Ceramics from Fine Powders by Two-Stage Sintering

Transparent lead lanthanum zirconate titanate (PLZT) ceramics were fabricated from fine powders using an inexpensive two-stage sintering technique. The powders were prepared by hydrolysis from low-cost inorganic precursors. In the two-stage sintering method, uniaxially pressed green pellets were densified to nearly theoretical values in an oxygen gas atmosphere during the first-stage sintering, at 1000°C for 1 h, and then residual, free lead oxide in the pellets was removed by second-stage sintering at 1100°C for 12 h. Transparent ceramic with an average grain size of 1.6 μm and a porosity of 1.3% was obtained. The transparency and dielectric characteristics of the present samples were compared with those of hot-pressed samples: The study of the polarization–field hysteresis loops of the present samples yielded a remanent polarization of 6.8 μC/m² and a coercive field of 1.6 kV/cm. The low coercive field of PLZT ceramics could potentially reduce the driving voltage of electrooptic devices in many applications.     

Low-Temperature Processing and Mechanical Properties of Zirconia and Zirconia–Alumina Nanoceramics

The 1.5- to 3-mol%-Y₂O₃-stabilized tetragonal ZrO₂ (Y-TZP) and Al₂O₃/Y-TZP nanocomposite ceramics with 1 to 5 wt% of alumina were produced by a colloidal technique and low-temperature sintering. The influence of the ceramic processing conditions, resulting density, microstructure, and the alumina content on the hardness and toughness were determined. The densification of the zirconia (Y-TZP) ceramic at low temperatures was possible only when a highly uniform packing of the nanoaggregates was achieved in the green compacts. The bulk nanostructured 3-mol%-yttria-stabilized zirconia ceramic with an average grain size of 112 nm was shown to reach a hardness of 12.2 GPa and a fracture toughness of 9.3 MPa·m^1/2. The addition of alumina allowed the sintering process to be intensified. A nanograined bulk alumina/zirconia composite ceramic with an average grain size of 94 nm was obtained, and the hardness increased to 16.2 GPa. Nanograined tetragonal zirconia ceramics with a reduced yttria-stabilizer content were shown to reach fracture toughnesses between 12.6–14.8 MPa·m^1/2 (2Y-TZP) and 11.9–13.9 MPa·m^1/2 (1.5Y-TZP).     

Chemospecific ring-opening polymerization of α-methylenemacrolides

α-Methylenemacrolides having various groups, such as aromatic, ether, and amine, were enzymatically, anionically, and radically polymerized. The polymerization with the lipase catalyst successfully afforded polymers only through the ring-opening process, whereas the vinyl polymerizations selectively proceeded by using anionic and radical initiators. The polyesters obtained by the enzymatic polymerization have a polymerizable methacrylic methylene group in the main-chain, in addition to the aromatic and polar groups, and were further radically polymerized to quantitatively produce a cross-linked polymer gel.     

X-ray absorption fine structure study on residue bromine in carbons with different degrees of graphitization

The structure of bromine residue compounds was investigated by X-ray absorption fine structure (XAFS) in order to interpret where and how bromine is present in carbons with different degrees of graphitization. The residue compounds can be classified into three groups, as obtained from X-ray absorption near edge structure (XANES) spectra and the values of the intramolecular distance r_Br–Br determined by extended X-ray absorption fine structure (EXAFS). In Group I, prepared from the host carbons heat treated at temperatures higher than 1900 °C, bromine exists in the interlayer space of graphite in the form of Br₂ molecules with interaction of the π electrons of graphite. In Group III, from carbon heat treated at 1000 °C, most of the bromine probably reacts with carbon atoms having a dangling bond or functional groups. For Group II, where the host carbons are heat treated at intermediate temperatures, it is likely that bromine exists in undeveloped defects with a unique electronic state.     

Gene expression within cell-sized lipid vesicles

Functional protein synthesis was observed in cell-sized lipid vesicles following encapsulation of a gene-expression system. Expression of rsGFP (red-shifted green fluorescent protein) within individual vesicles was observed by fluorescence microscopy. Interestingly, at the early stage of the reaction, the expression efficiency inside the vesicle was remarkably higher than that in the solution outside. The synthesized rsGFP in individual vesicles is safe from attack by proteinase K added to the external aqueous solution. Studies on cell-sized vesicles expressing protein should contribute to a fundamental understanding of certain aspects of living systems and will be useful for practical applications, such as the construction of microreactors.