Parametric Studies on the Behavior of Reinforced Soil Retaining Walls under Earthquake Loading

The finite element procedures are extremely useful in gaining insights into the behavior of reinforced soil retaining walls. In this study, a validated finite element procedure was used for conducting a series of parametric studies on the behavior of reinforced soil walls under construction and subject to earthquake loading. The procedure utilized a nonlinear numerical algorithms that incorporated a generalized plasticity soil model and a bounding surface geosynthetic model. The reinforcement layouts, soil properties under monotonic and cyclic loadings, block interaction properties, and earthquake motions were among major variables of investigation. The performance of the wall was presented for the facing deformation and crest surface settlement, lateral earth pressure, tensile force in the reinforcement layers, and acceleration amplification. The effects of soil properties, earthquake motions, and reinforcement layouts are issues of major design concern under earthquake loading. The deformation, reinforcement force, and earth pressure increased drastically under earthquake loading compared to end of construction.     

Fe-Ni-Si基奥氏体时效合金的马氏体相变和形状记忆效应

It is well known that the morphologies of the α martensite formed from the γ phase in ferrous alloys are classified into five types of lath, butterfly, (225)A type plate,lenticular and thin-plate. Among those α martensites, onlythe thinplate martensite, which is characterized by containing a high density of transformation twins, has a potential of exhibiting a perfect shape memory (SM) effect.Recently the present authors found in Fe-Ni-Si alloys that the thin-plate martensite is formed by the introduction of fine and coherent γ-(Ni,Fe)3Si particles with a L12 ordered structure in the austenite matrix due to ausaging. In the present study, the SM properties of the ausaged Fe-Ni-Si alloys with the thin-plate martensite are investigated by a conventional bending-test. The effects of the addition of Co to the Fe-Ni-Si alloys on the martensitic transformation and the SM properties are also investigated. It is shown that while the ausaged Fe-Ni-Si ternary alloys exhibit an imperfect SM effect due to reverse transformation from stress-induced thin-plate martensite to austenite, the SM properties are improved by the addition of Co. An almost perfect SM effect is confirmed in the Fe-Ni-Si-Co alloys by heating to 1 100 ℃ after deformation at -196 ℃.     

The Atmospheric Scanning Electron Microscope with open sample space observes dynamic phenomena in liquid or gas

Although conventional electron microscopy (EM) requires samples to be in vacuum, most chemical and physical reactions occur in liquid or gas. The Atmospheric Scanning Electron Microscope (ASEM) can observe dynamic phenomena in liquid or gas under atmospheric pressure in real time. An electron-permeable window made of pressure-resistant 100 nm-thick silicon nitride (SiN) film, set into the bottom of the open ASEM sample dish, allows an electron beam to be projected from underneath the sample. A detector positioned below captures backscattered electrons. Using the ASEM, we observed the radiation-induced self-organization process of particles, as well as phenomena accompanying volume change, including evaporation-induced crystallization. Using the electrochemical ASEM dish, we observed tree-like electrochemical depositions on the cathode. In silver nitrate solution, we observed silver depositions near the cathode forming incidental internal voids. The heated ASEM dish allowed observation of patterns of contrast in melting and solidifying solder. Finally, to demonstrate its applicability for monitoring and control of industrial processes, silver paste and solder paste were examined at high throughput. High resolution, imaging speed, flexibility, adaptability, and ease of use facilitate the observation of previously difficult-to-image phenomena, and make the ASEM applicable to various fields.     

Simulation of a chemical reaction, 2LiH→Li2+H2, driven by doubly excitation

A direct computer simulation of reaction dynamics at the electronic excited states is not easy to perform, because nonadiabatic equations must be solved as a function of time. Here we present a simple simulation to integrate directly the time-dependent Schrödinger equation within the framework of the time-dependent density functional theory (for electrons) coupled with the Newtonian equation of motion (for nuclei). We find that a chemical reaction, 2LiH→Li₂+H₂, takes place by the doubly excitation. Along the reaction, a level crossing occurs automatically between the highest occupied and lowest unoccupied levels. The simulation demonstrates a mechanism for relaxation for the reactions driven by doubly excitation: electronic excited state changes smoothly into the electronic ground state leaving a kinetic energy of the atoms.     

Modeling of Nonlinear Magnetizing Characteristics of Pole Transformer for Analyzing Islanding Prevention of Photovoltaic System

With increasing penetration of distributed generators such as photovoltaic (PV) systems in distribution systems, it is very important to quickly detect islanding caused by power system faults in order to assure electrical safety. We have developed a nonlinear magnetizing characteristics model of pole transformers for use in analyzing islanding prevention in PV systems. Basic experiments on the islanding detection were performed for verification of the proposed model. Analytical results obtained by the proposed model agreed well with experimental results.     

Effect of Shear Rate Distribution on Particle Aggregation in a Stirred Vessel

The modeling of particle aggregation under a simple shear flow and the extension of the model to a stirred vessel is described. The model quantitatively demonstrates the change of the number of aggregates with time for each shear rate. This number increased with higher shear rate and, conversely, the aggregate size became small when raising the shear rate. This was because aggregates were broken by the stronger shear force. The number of aggregates for different impellers was determined. The shear rate was back‐calculated from the experimentally obtained aggregate size and the model equation. This shear rate was different from that estimated from the Metzner‐Otto method, consequently, some revisions of the Metzner‐Otto equation might be necessary for its application to particle aggregation.     

Possibility of Japanese Cedar Pollen Causing False Positives in the Deep Mycosis Test

Because Japanese cedar pollen (JCP) contains beta-1,3-d-glucan (BG), there is concern that its lingering presence in the atmosphere, especially during its scattering period, may cause false positives in the factor-G-based Limulus amebocyte lysate (LAL) assay used to test for deep mycosis (i.e., G-test). Hence, we examined whether the LAL assay would react positively with substances contained in JCP by using the G-test to measure JCP particles and extracts. BG was purified from the JCP extract on a BG-specific affinity column, and the percentage extractability was measured using three different BG-specific quantitative methods. The G-test detected 0.4 pg BG in a single JCP particle and 10 fg from a single particle in the extract. The percentage extractability of JCP-derived BG was not significantly different among the three quantitative methods. As the JCP particles should technically have been removed during serum separation, they should be less likely to be a direct false-positive factor. However, given that the LAL-assay-positive substances in the JCP extract were not distinguishable by the three BG-specific quantitative methods, we conclude that they may cause the background to rise. Therefore, in Japan false positives arising from JCP contamination should be considered when testing patients for deep mycosis.     

Dynamic mechanical properties of three‐component composites (acrylic polymer/epoxy/SiO2) in the glass‐transition region

In previous studies, we reported the linear and nonlinear rheological properties of three‐component composites consisting of acrylic polymer (AP), epoxy resin (EP), and various SiO₂ contents (AP/EP/SiO₂) in the molten state. In this study, the dynamic mechanical properties of AP/EP/SiO₂ composites with different particle sizes (0.5 and 8 μm) were investigated in the glass‐transition region. The EP consisted of three kinds of EP components. The α relaxation due to the glass transition shifted to a higher temperature with an increase in the volume fraction (?) for the AP/EP/SiO₂ composites having a particle size of 0.5 μm, but the α relaxation scarcely shifted for the composite having a particle size of 8 μm as a general result. This result suggested that the SiO₂ nanoparticles that were 0.5 μm in size adsorbed a lot of the low‐glass‐transition‐temperature (T_g) component because of their large surface area. The AP/SiO₂ composites did not exhibit a shift in T_g; this indicated that the composite did not adsorb any component. The modulus in the glassy state (E′_g) exhibited a very weak &phis; dependence for the AP/EP/SiO₂ composites having particle sizes of 0.5 and 8 μm, although E′_g of the AP/SiO₂ composites increased with &phis;. The AP/EP/SiO₂ composites exhibited a peculiar dynamic mechanical behavior, although the AP/SiO₂ composites showed the behavior of general two‐component composites. Scanning electron microscopic observations indicated that some components in the EP were adsorbed on the surface of the SiO₂ particles. We concluded that the peculiar behavior of the AP/EP/SiO₂ composites was due to the selective adsorption of the EP component. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40409.