Round robin on indentation fracture resistance of silicon carbide ceramics by using a powerful optical microscope

Reproducibility of indentation fracture resistance, K_IFR of silicon carbides sintered with B and C was evaluated by a round robin with ten laboratories. When the crack length was measured with an optical microscope at a low magnification of ～100×, K_IFR varied widely from 3.43 to 4.20 MPa m^1/2, whereas those obtained by a powerful microscopy with both an objective lens of 40× and a traveling stage exhibited a consistent value of 3.20±0.12 MPa m^1/2. The wide scatter of K_IFR for the former measurements was attributed mainly to the variation in misreading of the crack length. It was revealed that the high resolving power of the objective lens of 40× enabled to find exact crack tips easily, which resulted in the good matching of K_IFR between laboratories for the latter case. It was suggested that the observation of indentations with powerful optics was effective for improving the reproducibility of the IF method.     

Role of Grain-Boundary Glass Phase on the Superplastic Deformation of Tetragonal Zirconia Polycrystal

Superplastic deformation of tetragonal zirconia polycrystal (TZP) was investigated by compression test in the temperature range of 1000° to 1500°C. Special attention was paid to the role of the grain-boundary glass phase on hightemperature deformation behavior. A small addition of glass phase markedly improved the high-temperature deformability of TZP. Lithium silicate glass was much superior to aluminosilicate or lithium aluminum silicate glasses for lowering the high-temperature flow stress. The deformation mechanism was discussed on the basis of mechanical testing data and microstructural examinations.     

Fracture Resistance Behavior of High‐Thermal‐Conductivity Silicon Nitride Ceramics

Silicon nitride ceramics were prepared from a high‐purity silicon powder doped with 2 mol% Y₂O₃ and 5 mol% MgO as sintering additives via a route of sintering of reaction‐bonded silicon nitride (SRBSN). The materials sintered at 1900°C for 3, 6, 12, and 24 h had thermal conductivities of 109, 125, 146, and 154 W/m/K, and four‐point bending strengths of 786, 676, 608, and 505 MPa, respectively. The fracture toughness values, determined by the single‐edge‐precracked‐beam (SEPB) method, were 8.4, 8.6, 9.7, and 10.7 MPa m^1/2 for the materials sintered for 3, 6, 12, and 24 h, respectively, which were similar to the results measured by the chevron‐notched‐beam (CNB) test method. The materials sintered for longer times (12 and 24 h) showed stronger R‐curve behaviors over longer range of crack extension, in comparison with the materials sintered for shorter times (3 and 6 h).     

Combustion synthesis of LaSi3N5:Eu2+ phosphor powders

LaSi₃N₅:Eu²⁺ phosphor powders were prepared by a highly efficient combustion synthesis method. It was found that the compositions of the raw powder mixtures had great influences on the phase compositions and particle morphologies of the synthesized powders. By selecting appropriate starting compositions and combustion parameters, single phase LaSi₃N₅:Eu²⁺ phosphors could be synthesized. When excited by a UV light, the LaSi₃N₅:Eu²⁺ phosphors emitted green light. The wavelength and intensity of the emission spectra were affected by the amount of Eu²⁺ dopant. With increasing amount of Eu²⁺ dopant, concentration quenching could occur and emission spectra shifted to longer wavelengths.     

Calcium oxide/carbon dioxide reactivity in a packed bed reactor of a chemical heat pump for high-temperature gas reactors

The thermal performance of a chemical heat pump that uses a calcium oxide/carbon dioxide reaction system was discussed as a heat storage system for utilizing heat output from high temperature gas reactors (HTGR). Calcium oxide/carbon dioxide reactivity for the heat pump was measured using a packed bed reactor containing 1.0 kg of reactant. The reactor was capable of storing heat at 900 °C by decarbonation of calcium carbonate and generating up to 997 °C by carbonation of calcium oxide. The amount of stored heat in the reactor was 800–900 kJ kg⁻¹. The output temperature of the reactor could be controlled by regulating the carbonation pressure. The thermal storage performance of the reactor was superior to that of conventional sensible heat storage systems. A heat pump using this CaO/CO₂ reactor is expected to contribute to thermal load leveling and to realize highly efficient utilization of HTGR output due to the high heat storage density and high-quality temperature output of the heat pump.     

Simultaneous three-dimensional step-height measurement and high-resolution tomographic imaging with a spectral interferometric microscope

A noncontact, nonmechanical scanning, wide-field spectral interference microscope is developed for simultaneous measurement of three-dimensional step-height of discontinuous objects and tomographic imaging. A superluminescent diode (SLD) is used as a broadband light source and a liquid-crystal Fabry-Perot interferometer (LC-FPI) as a frequency-scanning device. By means of changing the injection current to the SLD, the spectral profile of the SLD is equalized, and a constant light input to the interferometer is achieved over the entire frequency-scan range. The Fourier-transform technique is used to determine both the amplitude and the phase of spectral fringe signals. Three-dimensional height distribution of a discontinuous object is obtained from the phase information, whereas optically sectioned images of the object are obtained either from the amplitude information alone or from the combination of both the amplitude and phase information. Experimental results with submicrometer resolution are presented for both step-height measurement and tomographic sectioning.     

Ammonia assimilation in Klebsiella pneumoniae F-5-2 that can utilize ammonium and nitrate ions simultaneously: purification and characterization of glutamate dehydrogenase and glutamine synthetase

The two ammonia-assimilating enzymes glutamate dehydrogenase (GDH; EC 1.4.1.4) and glutamine synthetase (GS; EC 6.3.1.2) were synthesized steadily during the cell growth of Klebsiella pneumoniae F-5-2 that can utilize NH4+ and NO3- simultaneously under aerobic conditions. The enzymes were purified to homogeneity from cell extracts and characterized. The molecular mass of the purified GDH was 300 kDa with six identical 52-kDa subunits. GDH showed its maximal activity (aminating) at pH 8.0 and was stable between pHs 5.5 and 11.5. The enzyme was NADP-specific and strongly inhibited by Ag+. It catalyzed the amination of 2-ketovalerate, 2-ketoadipate, and 2-ketobutyrate, in addition to 2-ketoglutarate. The purified GS has a molecular mass of 470 kDa with eight identical 60-kDa subunits. GS showed its maximal activity at pH 8.0 and was stable between pHs 6.0 and 7.0. The enzyme was strongly inhibited by Fe3+, Hg2+, and Cu2+.     

Endoscopic sphincterotomy and laparoscopic cholecystectomy in an infant with cholecysto-choledocholithiasis

Laparoscopic cholecystectomy (LC) and endoscopic sphincterotomy (EST) are widely accepted procedures for cholecysto-choledocholithiasis in adults. However, their use in infants has not been reported. An 8-month-old girl presented with high fever and obstructive jaundice. Ultrasound scan showed acute cholecystitis with stones in the bile duct. After 2-week-long antibiotic therapy the acute cholecystitis and hepatic impairment resolved. An endoscopic retrograde cholangiopancreatography (ERCP) confirmed choledocholithiasis and cholecystolithiasis. Risk factors for the development of biliary calculi were not detected. One month after the restoration of her liver function, she underwent EST using a side-viewing endoscope with a small sphincterotome. A common bile duct stone was extracted using a basket catheter. LC was then carried out. The time interval between the EST and LC was 34 days. No complications have been noted for 6 months.     

Habitual coffee consumption and blood pressure: A study of self-defense officials in Japan

The degree of fat hydrogenation and the trans fatty acid content of the diet affect the fatty acid composition of membranes, and the amount and the activity of some membrane enzymes. We describe the effects of four isocaloric diets containing either sunflower oil (SO, 0% trans), fish oil (FO, 0.5% trans), partially hydrogenated fish oil (PHFO, 30% trans), or highly hydrogenated fish oil (HHFO, 3.6% trans) as fat sources on the lipid composition and the trans fatty acid content of rat hepatic microsomes. We also describe the effect of these diets on the cytochrome P-450 content and on the aminopyrine N-demethylase, aniline hydroxylase, and UDP-glucuronyl transferase microsomal activities. Cytochrome P-450 content was dependent on the degree of unsaturation of the diet, being higher for the FO-containing diet and lower for the HHFO diet. Aminopyrine N-demethylase activity also correlated with the degree of unsaturation of the diet as did the cytochrome P-450 content did (FO > SO > PHFO > HHFO). Aniline hydroxylase activity appeared to be independent of the degree of unsaturation of the dietary fat, but correlated with the trans fatty acid content of the diet, which was also reflected in the trans content of the microsomal membranes. UDP-glucuronyl transferase activity was higher for the FO-containing diet than for the SO diet, showing intermediate values after the PHFO and HHFO diets.