Adsorption properties of oxygen and methane on Ga-ZSM-5; the origin of the selectivity of NOx reduction using methane

The adsorption properties of oxygen and methane on Ga-ZSM-5 and Cu-ZSM-5 catalysts were examined by a TPD method to clarify the extraordinary selectivity of HC-SCR using methane on Ga-ZSM-5. It was observed that Ga-ZSM-5 did not adsorb oxygen but adsorbed methane dissociatively, while on Cu-ZSM-5 oxygen was dissociatively adsorbed and reacted with adsorbed ethylene.     

Reinforcement of polypropylene by cellulose microfibers modified with polydopamine and octadecylamine

Cellulose microfibers (CMFs) having surfaces modified with polydopamine (PDPA) and octadecylamine (ODA) were prepared, and their reinforcing abilities for polypropylene (PP) were investigated. The PDPA coating was made via self-polymerization of dopamine (P-CMF), and subsequent alkylation was conducted by the reaction with ODA (OP-CMF). The modified CMFs exhibited improved dispersibility in the PP matrix due to the reduced hydrophilicity. The OP-CMF/PP composite prepared by batch mixing had a higher tensile modulus compared to that for the pure PP and composites with unmodified CMFs. However, excess alkylation lowered the tensile modulus, and the presence of an optimal degree of alkylation was demonstrated. The CMF/PP-IM composites fabricated by injection molding exhibited improved tensile properties compared to those prepared by batch mixing. Both the tensile modulus and yield stress were increased by increasing the CMF content and improved by the surface modification of the CMFs.     

Synthesis of cationic flocculant by radiation-induced copolymerization of methyl chloride salt of N,N-dimethylaminoethyl methacrylate with acrylamide in aqueous solution

The radiation-induced copolymerization of the methyl chloride salt of N,N-dimethylaminoethyl methacrylate (DMAEM·MC) with acrylamide (AAm) was used to prepare a cationic polymer flocculant. The polymerization rate increased with increasing dose rate, polymerization temperature, monomer concentration and mole fraction of AAm in the monomer mixture. The molecular weight of the copolymer was also found to increase with monomer concentration and mole fraction of AAm, but at high concentration and fraction of AAm, intermolecular crosslinking tends to occur during the polymerization to form water-insoluble copolymer. A water-soluble copolymer having various molecular weights and cationic strengths can be synthesized by selecting suitable reaction conditions; i.e., this radiation process can provide a much higher molecular weight copolymer with a wide range of cationic strength. The flocculation effect was evaluated using sludge from wastewater of sugar manufacture. It was found that the radiation-polymerized copolymer DMAEM·MC–AAm has an excellent flocculation effect.     

Optical and electronic properties of cobalt-doped zinc oxide films prepared by the sputtering method

In-doped ZnO, Co-doped ZnO and Li-doped NiO are successively deposited on quartz by the sputtering method. A current versus voltage curve of the three-layer device, in which the Indoped ZnO and Li-doped NiO are used as electrodes, reveals that the In-doped ZnO is an ohmic electrode and the Li-doped NiO is a blocking electrode with respect to electron injection. In photocurrent spectra of the three-layer device, there are two distinct peaks around 410 and 640 nm. The former is ascribed to the photoionization caused by the electric-dipole transition from the ground states,⁴A₂(F), to the conduction band, and the latter to the thermal emission from electronic excited states of Co²⁺,⁴T₁(P).     

Expression of two Trichoderma reesei xylanases in the fission yeast Schizosaccharomyces pombe

Two xylanase genes (xyn1 and xyn2) were amplified by the polymerase chain reaction (PCR) technique from first-strand cDNA prepared from mRNA of Trichoderma reesei QM9414. The genes were located under the human cytomegalovirus gene promoter (CMVp) on copy-number-controlled plasmids (pTLxyn1 and pTLxyn2). When both plasmids were introduced into Schizosaccharomyces pombe, functional xylanases (XYN I and XYN II) were secreted by the recombinant yeasts. The secreted XYN I protein had a molecular mass of 21 kDa whereas XYN II was produced as two molecular forms with sizes of 21 and 28 kDa, the former being not glycosylated and the latter N-glycosylated. XYN I was secreted in the culture medium at a level of about 25 microg/ml and XYN II at about 170 microg/ml. The recombinant xylanases had the same characteristics with respect to the effects of temperature and pH on the enzyme activity as the native ones.     

Specifying Real-Time Finite-State Systems in Linear Logic (Extended Abstract)

Abstract

Real-time finite-state systems may be specified in linear logic by means of linear implications between conjunctions of fixed finite length. In this setting, where time is treated as a dense linear ordering, safety properties may be expressed as certain provability problems. These provability problems are shown to be in pspace. They are solvable, with some guidance, by finite proof search in concurrent logic programming environments based on linear logic and acting as sort of model-checkers. One advantage of our approach is that either it provides unsafe runs or it actually establishes safety.     

Compact electrostatic levitator for diffraction measurements with a two axis diffractometer and a laboratory x-ray source

A compact electrostatic levitator was developed for the structural analysis of high-temperature liquids by x-ray diffraction methods. The size of the levitator was 200 mm in diameter and 200 mm in height and can be set up on a two axis diffractometer with a laboratory x-ray source, which is very convenient in performing structural measurements of high-temperature liquids. In particular, since the laboratory x-ray source allows a great amount of user time, preliminary or challenging experiments can be performed with trial and error, which prepares and complements synchrotron x-ray experiments. The present small apparatus also provides the advantage of portability and facility of setting. To demonstrate the capability of this electrostatic levitator, the static structure factors of alumina and silicon samples in their liquid phases were successfully measured.     

Preparation of Aluminum Nitride–Silicon Carbide Nanocomposite Powder by the Nitridation of Aluminum Silicon Carbide

Aluminum nitride (AlN)–silicon carbide (SiC) nanocomposite powders were prepared by the nitridation of aluminum-silicon carbide (Al₄SiC₄) with the specific surface area of 15.5 m²·g⁻¹. The powders nitrided at and above 1400°C for 3 h contained the 2H-phases which consisted of AlN-rich and SiC-rich phases. The formation of homogeneous solid solution proceeded with increasing nitridation temperature from 1400° up to 1500°C. The specific surface area of the AlN–SiC powder nitrided at 1500°C for 3 h was 19.5 m²·g⁻¹, whereas the primary particle size (assuming spherical particles) was estimated to be ∼100 nm.     

Fabrication of fluorine-terminated diamond-like carbon thin film using a hyperthermal atomic fluorine beam

Surface modification of diamond-like carbon (DLC) film was performed using a hyperthermal atomic fluorine beam on the purpose of production of hydrophobic surface by maintaining the high hardness of DLC film. By the irradiation of atomic fluorine beam of a 1.0 × 10²⁰ atoms/cm², the contact angle of a water drop against the DLC surface increased from 73° to 111°. The formation of CF₃, CF₂ and CF bonding on the modified DLC surface was confirmed from the measurements of X-ray photoelectron spectra and near-edge X-ray absorption fine structure spectra. Irradiation of hyperthermal atomic fluorine beam was concluded to produce insulator fluorine-terminated DLC film, which has high F content on the surface, by the taking of the use of neutral atomic beam as a fluorine source.