Temperature monitoring

Central temperature is usually tightly regulated in human beings. Anesthesia alters the normal thermoregulatory controls of the body. Intraoperatively, mild degrees of hypothermia may provide some cerebral protection. However, the risk of organ dysfunction and shivering require that the anesthesiologist be prepared to treat severe hypothermia. Appropriate measures such as warning the operating room and using forced air blankets can prevent both intraoperative hypothermia and postoperative shivering. The use of temperature measurement is not limited to the operative and immediate recovery periods. Anesthesiologists practicing in intensive care units and in pain clinics use temperature monitoring as a diagnostic tool in a variety of situations.     

Interaction behavior of nitrogen in liquid niobium

The kinetics and mechanism of absorption/desorption of nitrogen in liquid Nb were investigated in the temperature range of 2470 °C to 2670 °C in samples levitated in a N₂/Ar stream with various nitrogen partial pressures. The nitrogen solution reaction in liquid Nb was found to be exothermic, with the standard enthalpy and entropy of solution of −236.4 ± 23.3 kJ/mol and −-5.3 ± 8.3 J/K · mol, respectively. Above the threshold flow rate of the N₂/Ar stream, the absorption process was determined to be second order with respect to nitrogen concentration, indicating that the rate-controlling step is either the adsorption of nitrogen molecules on the liquid surface or dissociation of adsorbed nitrogen molecules into surface-adsorbed atoms. The desorption process was found to be second order as well. At lower flow rates, however, the absorption rate was found to depend on the gas-phase mass transfer rate. The rate equation for nitrogen absorption in the range of 2470 °C to 2670 °C is given by with the value ofQ calculated to be −327.2 ± 20.6 kJ/mol, while nitrogen desorption at 2670 °C follows the relation      

Simple culling methods for continuous collision detection of deforming triangles

We present a simple and efficient approach for continuous collision detection of deforming triangles based on conservative advancement. The efficiency of our approach is due to a sequence of simple collision-free conditions for deforming triangles. In our experiment, we show that our CCD algorithm achieves 2-30 times performance improvement over existing algorithms for triangle primitives.     

Adaptive synthesis of distance fields

We address the computational resource requirements of 3D example-based synthesis with an adaptive synthesis technique that uses a tree-based synthesis map. A signed-distance field (SDF) is determined for the 3D exemplars, and then new models can be synthesized as SDFs by neighborhood matching. Unlike voxel synthesis approach, our input is posed in the real domain to preserve maximum detail. In comparison to straightforward extensions to the existing volume texture synthesis approach, we made several improvements in terms of memory requirements, computation times, and synthesis quality. The inherent parallelism in this method makes it suitable for a multicore CPU. Results show that computation times and memory requirements are very much reduced, and large synthesized scenes exhibit fine details which mimic the exemplars.     

The α- to β-Si3N4 transformation in the presence of liquid silicon

The compacts consisted of , -Si₃N₄ and free silicon are heat treated in the range 1650° C to 1750° C in an argon atmosphere in order to observe the following behaviours; the to phase transformation and variations of the microstructure during heat treatment in silicon nitride. For the microstructural observation of the heat treated specimens, the same grains in the polished surface were investigated before and after eliminating the retained silicon by etching. The to phase transformation, in this case, occurs via silicon melts irrespective of added -Si₃N₄. Both and phases are soluted and precipitated into molten silicon and their morphology are changed from an equiaxed shape to prismatic one. Although elongated grains are precipitated at low temperature or in the early stage of heat treatment, fine precipitated grains are mainly observed with increasing heat treating temperature.     

Beam profile measurement of a solar-pumped iodine laser

Beam profile measurements have been made as a function of time within the laser pulse and C2F5I pressure. Measurements indicate that the profile is determined directly by the optical excitation volume, produced by the solar simulator, and that media distortion plays a minor role compared to the build up of quenching species during the lasing pulse.     

A study on the dynamic characteristics of the Korean Yi-dynasty bell type structure

The dynamic characteristics of the Korean Yi-dynasty bell type structure, including the acoustic effects, are analyzed both theoretically and experimentally. The numerical solutions of natural frequencies and mode shape for membrane and flexural behavior are obtained by using the NASTRAN program for the finite element method with plate shell elements of triangular and quadrilateral types. Test bells, A and B types similar to the Kap-Sa bell in Kong-Ju chosen among typical Korean Yi-dynasty bells, are manufactured on different scales to the original bell. To consider the effects of the variation of the structural dimension on the dynamic response, these bells are analyzed with respect to the variation of the thickness of the wall and the bottom rim and the asymmetric Dang-Jwas. The impact method with the Fast Fourier Transform Analyzer is adopted to experimentally assess the dynamic response. Results are in good agreement with the numerical solutions.     

The diffusion and solubility of oxygen in solid nickel

Solid-state electrochemical measurements using various experimental procedures were made with the double cell: $$ Ni + NiO|ZrO_2 + Y_2 O_3 |Ni + \underline O |ZrO_2 + Y_2 O_3 |Ni + NiO $$ to determine the diffusivity and thermodynamic functions of oxygen dissolved in solid nickel. Non-steady state diffusion of oxygen in the specimen was caused by applying a preselected potential between the reference and specimen electrodes and was monitored by measuring time-dependent potentials and/or currents. The following results were obtained for the diffusivity of oxygen and the solubility of oxygen in nickel in equilibrium with NiO: $$D{\text{ = 4}}{\text{.9 }} \times {\text{ 10}}^{{\text{ - 2}}} {\text{ exp}}\left( {{\text{ - }}\frac{{{\text{164 kJ/mole}}}}{{{\text{R}}T}}} \right){\text{cm}}^{\text{2}} /{\text{sec (850 to 1400 }}{}^{\text{o}}{\text{C)}}$$ $$C_{\text{O}}^s {\text{ = 8}}{\text{.3 exp}}\left( { - \frac{{55{\text{kJ/mole}}}}{{{\text{R}}T}}} \right){\text{at}}{\text{. pct (800 to 1000 }}{}^{\text{o}}{\text{C)}}$$ The thermodynamic and transport behaviors of oxygen in solid nickel were fairly well described by a simple quasi-regular model and an interstitial diffusion model, respectively.     

Diffusion of additives and plasticizers in poly(vinyl chloride): 4. A programmed temperature technique for the determination of the diffusion parameters of three dialkylphthalates

A programmed temperature technique has been developed for the measurement of the self-diffusion coefficients of additives in polymers. This has been applied to the diffusion of three dialkylphthalate plasticizers in poly(vinyl chloride). Values of the self-diffusion coefficients and the calculated activation energies obtained in this way have been compared with values previously obtained from measurements at constant temperature. It has been shown that the programmed temperature technique gives a very rapid method for the estimation of the activation energy of self-diffusion.